Stefan Reinauer escribió:
On 1/27/10 10:35 AM, Knut Kujat wrote:
Knut Kujat escribió:
I haven't tried with a unpatched version of memtest86+ 4.0 and it works
typo!! I meant I HAVE tried memtest86+ 4.0 with a non patched version and vendor BIOS and it worked.
Are you saying that the patch breaks Vendor BIOS, too?
Stefan
Unfortunately yes. With the patched memtest86+ 4.0 the only difference between coreboot and vendor bios is that coreboot freezes the screen completely and vendor bios reboots. And both actions happen at, as far as I can tell, the same point or time.
thx, Knut Kujat.
with vendor BIOS. Now with the patched version it halts with coreboot without error messages (the output you see below is what I see until I press reset button) and with vendor BIOS its reboots at the same point (after 2 sec).
bye and thx, Knut Kujat.
Stefan Reinauer escribió:
Knut,
are the values the same as with the vendor bios? Do you get any errors at all, or does it just hang?
Stefan
On 1/26/10 5:48 PM, Knut Kujat wrote:
I tried it with and without the little patch below ( and of course with the "big" patch) and it freezes after 2 seconds:
Memtest86+ v4.00 | Pass 0% AMD K10 (65nm) @ 2000 MHz | Test 3% # L1 Cache: 64K 30303 MB/s | Test #0 [Address test, walking ones] L2 Cache: 512K 10050 MB/s | Testing: 4096M - 6144M 16G L3 Cache: 2048K 5649 MB/s | Pattern: 00000000 Memory : 16G 1122 MB/s |------------------------------------------------- Chipset : AMD K10 IMC (ECC : Detect / Correct - Chipkill : Off) Settings: RAM : 333 MHz (DDR667) / CAS : 5-5-5-15 / DDR2 (64 bits)
WallTime Cached RsvdMem MemMap Cache ECC Test Pass Errors ECC Errs
0:00:02 16G 0K coreboot on off Std 0 0
If you need some more output of whatever just ask me.
bye and thx, Knut Kujat