Mike Loptien (mike.loptien@se-eng.com) just uploaded a new patch set to gerrit, which you can find at http://review.coreboot.org/2592
-gerrit
commit 1480149869b2806153fd849cca2a85a8b26f1727 Author: Mike Loptien mike.loptien@se-eng.com Date: Tue Mar 5 14:21:28 2013 -0700
Persimmon DSDT: Add secondary bus range to PCI0
Adding the 'WordBusNumber' macro to the PCI0 CRES ResourceTemplate in the Persimmon DSDT. This sets up the bus number for the PCI0 device and the secondary bus number for the CRS method. This change allows the FWTS test 'klog' to pass and will remove this FWTS error message:
FAILED [MEDIUM] KlogFirmwareBugACPInoSecondary: test1, MEDIUM Kernel message: [ 0.198776] [Firmware Bug]: ACPI: no secondary bus range in _CRS
Run the test 'fwts klog' to see the results.
This change will apply to other AMD mainboards and will be in a different commit.
Change-Id: I44f22bc03a0dcbcd2594d4291508826cc2146860 Signed-off-by: Mike Loptien mike.loptien@se-eng.com --- src/mainboard/amd/persimmon/dsdt.asl | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/src/mainboard/amd/persimmon/dsdt.asl b/src/mainboard/amd/persimmon/dsdt.asl index 582ab7f..34ebbf0 100644 --- a/src/mainboard/amd/persimmon/dsdt.asl +++ b/src/mainboard/amd/persimmon/dsdt.asl @@ -1157,6 +1157,8 @@ DefinitionBlock ( Device(PCI0) { External (TOM1) External (TOM2) + NAME (PSBB, 0x0000) /* Secondary bus base variable for PCI0 */ + NAME (PSBL, 0x00FF) /* Secondary bus length variable for PCI0 */ Name(_HID, EISAID("PNP0A03")) Name(_ADR, 0x00180000) /* Dev# = BSP Dev#, Func# = 0 */ Method(_BBN, 0) { /* Bus number = 0 */ @@ -1477,6 +1479,15 @@ DefinitionBlock ( } /* end Ac97modem */
Name(CRES, ResourceTemplate() { + /* This sets the Bus number and Secondary Bus number for the PCI0 device */ + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x007F, /* range maximum */ + 0x0000, /* translation */ + 0x0080, /* length */ + ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */ + IO(Decode16, 0x0CF8, 0x0CF8, 1, 8)
WORDIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, @@ -1581,6 +1592,19 @@ DefinitionBlock ( Store(PBLN,EBML) } #endif + /* + * This sets up the secondary bus range for PCI0, + * allowing the 'fwts klog' test to pass. + */ + CreateWordField (CRES, ^PSB0._MIN, MIN0) + CreateWordField (CRES, ^PSB0._MAX, MAX0) + CreateWordField (CRES, ^PSB0._LEN, LEN0) + + Store (PSBB, MIN0) /* Put Secondary Bus Base value into MIN0 memory */ + Store (PSBL, LEN0) /* Put Secondary Bus Length value into LEN0 memory */ + Store (LEN0, Local0) /* Copy into Local0 for doing math */ + Add (MIN0, Decrement (Local0), MAX0) /* Add MIN0 to Local0 and put it into MAX0 memory */ + CreateDWordField(CRES, ^MMIO._BAS, MM1B) CreateDWordField(CRES, ^MMIO._LEN, MM1L) /*