Would someone post step-by-step instructions for building coreboot for QEMU and then starting QEMU? I keep getting problems like this:
Multiboot Information structure has been written. 0. FREE SPACE 07fe9c00 00016400 1. GDT 07fe0200 00000200 2. IRQ TABLE 07fe0400 00001000 3. SMBIOS 07fe1400 00000800 4. COREBOOT 07fe1c00 00008000 CBFS: Looking for 'fallback/payload' CBFS: found. Got a payload CPU0: stack from 00118000 to 00120000:Lowest stack address 0011fba8 Loading segment from rom address 0xfffc97f8 code (compression=1) New segment dstaddr 0xe5fac memsize 0x1a054 srcaddr 0xfffc9830 filesize 0xd0e2 (cleaned up) New segment addr 0xe5fac size 0x1a054 offset 0xfffc9830 filesize 0xd0e2 Loading segment from rom address 0xfffc9814 Entry Point 0x00000000 Loading Segment: addr: 0x00000000000e5fac memsz: 0x000000000001a054 filesz: 0x000000000000d0e2 lb: [0x0000000000100000, 0x0000000000124000) Post relocation: addr: 0x00000000000e5fac memsz: 0x000000000001a054 filesz: 0x000000000000d0e2 using LZMA lzma: Decoding error = 1 Boot failed