Hi,
Please post output of superio tool in verbose mode. Maybe you need to set input to the ITE if it is 48Mhz or 24Mhz, usually it is some bit in CR20-2f
I dont have any POST card so i dont know how the IO is routed.
Also provide lspci -vvvxxx
Check if your image contains following at the end:
0007ff80 aa 00 44 50 c2 0f 97 61 aa 00 44 50 c2 0f 97 61 |..DP...a..DP...a| 0007ff90 aa 00 44 50 c2 0f 97 61 aa 00 44 50 c2 0f 97 61 |..DP...a..DP...a| 0007ffa0 aa 00 44 50 c2 0f 97 61 00 00 00 00 00 00 00 00 |..DP...a........| 0007ffb0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 0007ffc0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 0007ffd0 80 ff 0f 00 ff ff ff ff ff ff ff ff ff ff ff ff |................| 0007ffe0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| 0007fff0 e9 11 00 ff ff 00 00 00 e9 5f 00 ff d0 ff fd ff |........._......| 00080000
Rudolf