Hi, I think my problem while using cimx are reset
related, looking on
log of my experiments with sb800 (where more success), I see that first
initialisation always finished by ...WARM RESET..., and starts after
it. With cimx it can not start after WARN RESET, (same way as after hard
reset button), it stops with zero post code, and can begin
initialization only after power off/on sequence. Can one give some
direction how to find solution?
While playing with bit0,bit1 of SB_MISC_REG84, from my mistake, original
flash chip (it is winbond w25q32)
was programmed by coreboots content. There was used at25df321a (which
are able to boot original bios without such problem) for it before. And
this problem are gone (only chip replacement was enough).