Re: [coreboot] Fam10h support for Tyan S2912-E

[Marc Jones]

Arne,

The log looks good from the CPU side. I didn't look at the diff. When it 
is ready you should submit it with a signed-off-by.

Marc

Arne Georg Gleditsch wrote:
> Marc Jones  writes:
> > Please send the entire serial output with
> > DEFAULT_CONSOLE_LOGLEVEL=8. I would like to see if there are any
> > issues with the CPU init.
>
> Here you go.  My current status is as follows:
> SATA controller: works, but only if vendor BIOS is allowed to run once
> after poweron.  Not sure what the issue can be here, since the
> controller seems to work flawlessly both in FILO and Linux when the
> vendor BIOS is replaced with coreboot in flight and hard reset is
> applied.
> Network controllers: work, but only with pci=nomsi kernel option.
> PCIe addon cards are not discovered.
>
> Attached: log from (failing) poweron run and (working) post-vendor cold
> reset run, as well as my diffs (initial copying of s2912 sources omitted
> for brevity).
>
> The first issue is for me the most serious one, so any pointers on how
> to get that resolved would be appreciated.