[coreboot] r3996 - trunk/coreboot-v2/util/abuild

Author: stepan
Date: 2009-03-11 16:43:02 +0100 (Wed, 11 Mar 2009)
New Revision: 3996

Modified:
   trunk/coreboot-v2/util/abuild/abuild
Log:
20090310-3-scanbuild:
Add support for clang's scan-build utility to abuild. scan-build wraps
the compiler and runs its own compiler on the same sources to do some
static analysis on them. It adds an option "-sb" or "--scan-build" that
creates a coreboot-builds/$target-scanbuild directory for every $target,
containing the output of scan-build, which is a HTML documentation on
its results.
Be aware, that scanbuild significantly increases build time: A board
that takes 6-7 seconds normally requires 60 seconds with that option
enabled on my test system.
The patch also moves the stack-protector option down a bit, so it
applies to crosscompiled targets, too (which overwrote the compiler
settings before)

Signed-off-by: Patrick Georgi 
Acked-by: Stefan Reinauer

Modified: trunk/coreboot-v2/util/abuild/abuild
===================================================================
--- trunk/coreboot-v2/util/abuild/abuild	2009-03-11 15:36:39 UTC (rev 3995)
+++ trunk/coreboot-v2/util/abuild/abuild	2009-03-11 15:43:02 UTC (rev 3996)
@@ -46,6 +46,9 @@
 # this is disabled per default but can be enabled with -s
 silent=

+# clang mode enabled by -sb option.
+scanbuild=false
+
 # stackprotect mode enabled by -ns option.
 stackprotect=false

@@ -334,9 +337,7 @@
    	CROSS_COMPILE="$TARCH-elf-"
    	found_crosscompiler=true
    fi
-	if  [ "$stackprotect" = "true" ]; then
-		CC="$CC -fno-stack-protector"
-	fi
+
    HOSTCC='gcc'

printf "Processing mainboard/$VENDOR/$MAINBOARD"
@@ -396,6 +397,25 @@
    	fi
    fi

+	if  [ "$stackprotect" = "true" ]; then
+		CC="$CC -fno-stack-protector"
+	fi
+
+	if  [ "$scanbuild" = "true" ]; then
+		ccwrap=`mktemp`
+		mkdir -p $TARGET/${VENDOR}_${MAINBOARD}
+		mkdir -p $TARGET/scan-build-results-tmp
+		mv $ccwrap $TARGET/${VENDOR}_${MAINBOARD}
+		ccwrap=$TARGET/${VENDOR}_${MAINBOARD}/`basename $ccwrap`
+		echo '#!/bin/sh' > $ccwrap
+		echo $CC' "$@"' >> $ccwrap
+		chmod +x $ccwrap
+		origMAKE=$MAKE
+		MAKE="scan-build --use-cc=$ccwrap -o $TARGET/scan-build-results-tmp -analyze-headers $MAKE GCC=$ccwrap"
+		CC="$(CC)"
+		HOSTCC="CCC_CC=$HOSTCC $(CC)"
+	fi
+
    built_successfully $VENDOR $MAINBOARD && \
    {
    	printf " ( mainboard/$VENDOR/$MAINBOARD previously ok )\n\n"
@@ -419,6 +439,10 @@
    	compile_target $VENDOR $MAINBOARD && 
    		xml "  <status>ok</status>" ||
    		xml "<status>broken</status>"
+		if [ "$scanbuild" = "true" ]; then
+			mv `dirname $TARGET/scan-build-results-tmp/*/index.html` $TARGET/${VENDOR}_${MAINBOARD}-scanbuild
+			MAKE=$origMAKE
+		fi
    fi

xml ""
@@ -484,6 +508,7 @@
    printf "    [-c|--cpus <numcpus>]         build on <numcpus> at the same time\n"
    printf "    [-s|--silent]                 omit compiler calls in logs\n"
    printf "    [-ns|--nostackprotect]        use gcc -fno-stack-protector option\n"
+	printf "    [-sb|--scan-build]            use clang's static analyzer\n"
    printf "    [-C|--config]                 configure-only mode\n"
    printf "    [lbroot]			  absolute path to coreboot sources\n"
    printf "				  (defaults to $LBROOT)\n\n"
@@ -542,6 +567,7 @@
    	-c|--cpus)	shift; cpus="$1"; test "$cpus" == "max" && cpus=""; shift;;
    	-s|--silent)    shift; silent="-s";;
    	-ns|--nostackprotect) shift; stackprotect=true;;
+		-sb|--scan-build) shift; scanbuild=true;;
    	-C|--config)    shift; configureonly=1;;
    	--)		shift; break;;
    	-*)		printf "Invalid option\n\n"; myhelp; exit 1;;