On Fri, 2005-07-15 at 07:52 -0700, yhlu wrote:
ollie,
can you look at that?
I will check this one later.
Also static void *pci_ram_image_start = PCI_RAM_IMAGE_START;
should be changed to static void *pci_ram_image_start = PCI_RAM_IMAGE_START + 0x10000;// leave first 64k for VGA
No. There are to #define constants:
#define PCI_RAM_IMAGE_START 0xD0000 #define PCI_VGA_RAM_IMAGE_START 0xC0000
I already reserved 64KB for VGA BIOS.
YH
On 7/15/05, Tao Liu liutao1980@gmail.com wrote:
Hello,
pci_rom_load() returns wrong rom_header for non-VGA ROM case ?
--- orig/src/devices/pci_rom.c +++ mod/src/devices/pci_rom.c @@ -95,11 +95,11 @@ return (struct rom_header *) (PCI_VGA_RAM_IMAGE_START); #endif } else {
printk_spew("%s, copying non-VGA ROM Image from %x to %x, %x bytes\n",__func__, rom_header, pci_ram_image_start, rom_size);
printk_debug("copying non-VGA ROM Image from %x to %x, %x bytes\n",rom_header, pci_ram_image_start, rom_size); memcpy(pci_ram_image_start, rom_header, rom_size); pci_ram_image_start += rom_size;
return (struct rom_header *) pci_ram_image_start;
return (struct rom_header *) (pci_ram_image_start - rom_size); } /* disable expansion ROM address decoding */ pci_write_config32(dev, PCI_ROM_ADDRESS, rom_address &~PCI_ROM_ADDRESS_ENABLE);
-- Regards, Liu Tao
LinuxBIOS mailing list LinuxBIOS@openbios.org http://www.openbios.org/mailman/listinfo/linuxbios
LinuxBIOS mailing list LinuxBIOS@openbios.org http://www.openbios.org/mailman/listinfo/linuxbios