On 17.12.2008 04:39, Carl-Daniel Hailfinger wrote:
Hi all,
my Asus M2A-VM (690G/SB600) is working and boots to memtest and FILO.
Memtest works fine over serial (well, I only ran memtest until it reached 15%). FILO can load the kernel, but I didn't have time to enable serial output for my kernel.
Thanks to Zheng Bao for adding support for my 690G graphics.
I'll post a patch soon. Right now, there are a few more bugs to fix. The ncHT fixup is already known, a clean patch will come tomorrow.
On a first boot, I get an endless loop of
drive detection fail,trying...
until I press the reset button. After that, it boots fine. That message is in the SB600 code. I will enable some debugging that was disabled in revision 3785.
Another curiosity is that my power button has become ineffective. It simply initiates a reboot instead of switching off the machine after 4 seconds. That happens only with the FILO payload.
Oh, and it does not find more than 2 GB of RAM. I'll try to debug that as well.
Right now, I'm happy that it gets to FILO and can load a kernel.
The interrupts are probably wrong. I need to check that.
Regards, Carl-Daniel