* Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net [080229 20:13]:
Yes, it means the actual flash write mechanism is protected, though the ID command gets through. I had the same thing on another ICH4M board. Might be SMM protection, some GPIO or some other mapping/locking mechanism.
Do you remember what you did to fix this on the ICH4-M?
The issue remained unfixed, I used a Galep5 to burn the flash chips.
In theory, this should be debuggable with DOS ports of the ICH GPIO dumper and superiotool.
SMM based bios lock down? How so? It does not seem to be a GPIO issue in case.