Dave Ashley sent us one of those exact mainboards, we'll test it here at LANL next week. If you're in a rush, however, you should get Dave's attention.
As for vendors, I usually use www.pricewatch.com. I noticed there's a pricewatch.co.uk, but I'm not sure if it's run by the same people. Also, a lot of retailers are absolutely clueless about the hardware they're selling so you must be careful when trying to order a specific part.
On Fri, 13 Feb 2004, James Weir wrote:
EPIA ME6000
Is this board currently supported, and is there any hope of getting register descriptions for the north/south bridge and such.
Many thanks,
James
-----Original Message----- From: linuxbios-admin@clustermatic.org [mailto:linuxbios-admin@clustermatic.org] On Behalf Of Hendricks David W. Sent: 13 February 2004 20:59 To: James Weir Cc: LinuxBIOS Subject: Re: Advice on Board Selection
EPIA
It has a hardware DVD decoder, if I'm not mistaken. But more importantly, extensive work has been done on LinuxBIOS ports for various versions of this board. If you find one you like, get detailed specifications and check back here before ordering it so that someone can confirm if it works with LinuxBIOS.
On Fri, 13 Feb 2004, James Weir wrote:
Can anyone please recommend a board preferably small form factor ( itx? ) which the documentation is available for ( or a port of linux bios is available for ) which would be suitable for dvd playback?
Thanks,
James.
Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios
Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios