I have a wyse term 3150se system that I would like to install linuxbios on. Does any know the status of the CS55535? Also, what type of Geode is this, can I uses i686 with GCC, or will that give me errors? Trying to figure out what Cflags I can use. http://gentoo-wiki.com/Safe_Cflags
livecd ~ # lspci -vvv 00:01.0 Host bridge: National Semiconductor Corporation Geode GX2 Host Bridge (rev 21) Subsystem: National Semiconductor Corporation Geode GX2 Host Bridge Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248, Cache Line Size: 32 bytes Region 0: I/O ports at ac1c [size=4]
00:01.1 VGA compatible controller: National Semiconductor Corporation Geode GX2 Graphics Processor (prog-if 00 [VGA]) Subsystem: National Semiconductor Corporation Geode GX2 Graphics Processor Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at 41000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at 40ffc000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at 40ff8000 (32-bit, non-prefetchable) [size=16K] Region 3: Memory at 40ff4000 (32-bit, non-prefetchable) [size=16K]
00:0d.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 22 Interrupt: pin A routed to IRQ 10 Region 4: I/O ports at eee0 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 22 Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at eec0 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 5 Region 0: Memory at efe00000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at ef00 [size=256] Region 1: Memory at eff00000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 ISA bridge: National Semiconductor Corporation CS5535 ISA bridge (rev 13) Subsystem: National Semiconductor Corporation CS5535 ISA bridge Control: I/O+ Mem- BusMaster- SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: I/O ports at 1020 [size=8] Region 1: I/O ports at 6100 [size=256] Region 2: I/O ports at 6200 [size=64] Region 3: I/O ports at 1000 [size=32] Region 4: I/O ports at 9d00 [size=128] Region 5: I/O ports at 9c00 [size=64]
00:0f.2 IDE interface: National Semiconductor Corporation CS5535 IDE (prog-if 80 [Master]) Subsystem: National Semiconductor Corporation CS5535 IDE Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Region 4: I/O ports at eeb0 [size=16]
00:0f.3 Multimedia audio controller: National Semiconductor Corporation CS5535 Audio Subsystem: National Semiconductor Corporation CS5535 Audio Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 5 Region 0: I/O ports at ee00 [size=128]
livecd ~ # cat /proc/cpuinfo processor : 0 vendor_id : Geode by NSC cpu family : 5 model : 5 model name : Geode(TM) Integrated Processor by National Semi stepping : 2 cpu MHz : 399.932 cache size : 32 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de pse tsc msr cx8 pge cmov mmx mmxext 3dnowext 3dnow up bogomips : 804.86