Hi Julian,
On Thu, Mar 22, 2012 at 4:19 PM, Julian Shulika hercares@gmail.com wrote:
With two cpus
coreboot-4.0-2135-gccee625-dirty Thu Mar 22 20:39:08 EDT 2012 starting...
*sysinfo range: [000cf000,000cf730] bsp_apicid=00 Enabling routing table for node 00 done. Enabling SMP settings (0,1) link=02 (1,0) link=01 setup_remote_node: done Renaming current temporary node to 01 done. Enabling routing table for node 01
This will take some debug effort on your part. The K8 coreboot code is fairly old and doesn't have a anyone doing a lot of maintenance on it. You will need to add debug information to the source to narrow down the problems.
Marc
2012/3/22 Julian Shulika hercares@gmail.com
Hi. Motherboard Asus L1N64 with Dual Socket 1207 and switched mcp55,ite8716f,amd k8 cpus I have log from serial,that's all.
coreboot-4.0-2135-gccee625-dirty Thu Mar 22 19:21:00 EDT 2012 starting... *sysinfo range: [000cf000,000cf730] bsp_apicid=00 Enabling routing table for node 00 done. Enabling SMP settings 01 nodes initialized. Enabling UP settings coherent_ht_finalize done core0 started:
I attached files from lspci,flashrom,superiotool and /proc/gpio /proc/ioports
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot