#119: Winbond W39V040FBPZ is not written correctly by flashrom -----------------------------------------+---------------------------------- Reporter: charles.herndon@… | Owner: somebody Type: enhancement | Status: new Priority: minor | Milestone: Component: flashrom | Version: v2 Keywords: W39V040FBPZ | Dependencies: Patchstatus: there is no patch | -----------------------------------------+---------------------------------- Flash device is detected as a Winbond W39V040B device. Flashrom attempts to flash device, but verification fails. No actual writing to the chip appears to be done. Tried changing write and erase in flashchips.c to: jedec, winbond_fwhub and 49lfxxxc.
./flashrom -wv xxxx.bin Calibrating delay loop... OK. No coreboot table found. Found chipset "Intel ICH7/ICH7R", enabling flash write... OK. Found chip "Winbond W39V040B" (512 KB) at physical address 0xfff80000. Flash image seems to be a legacy BIOS. Disabling checks. Programming page: 0007 at address: 0x00070000 Verifying flash... FAILED! Expected=0xc7, Read=0x49