4 Feb
2008
4 Feb
'08
3:08 a.m.
Factor out print_conf() from Geode LX mainboard directories. The following mainboard files had identical Geode LX specific print_conf() implementations: mainboard/amd/db800/mainboard.c mainboard/amd/norwich/mainboard.c mainboard/digitallogic/msm800sev/mainboard.c mainboard/pcengines/alix1c/mainboard.c Move print_conf() to northbridge/amd/lx/northbridge.c where it belongs.
mainboard/amd/db800/mainboard.c | 155 -------------------------- mainboard/amd/norwich/mainboard.c | 157 --------------------------- mainboard/digitallogic/msm800sev/mainboard.c | 157 +++------------------------ mainboard/pcengines/alix1c/mainboard.c | 132 ---------------------- northbridge/amd/lx/northbridge.c | 152 +++++++++++++++++++++++++- 5 files changed, 173 insertions(+), 580 deletions(-)
Add a copyright notice to mainboard/digitallogic/msm800sev/mainboard.c.
Not compile tested because I lack the resources.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
--
http://www.hailfinger.org/
Index: LinuxBIOSv2-printconf/src/mainboard/digitallogic/msm800sev/mainboard.c
===================================================================
--- LinuxBIOSv2-printconf/src/mainboard/digitallogic/msm800sev/mainboard.c (Revision 3086)
+++ LinuxBIOSv2-printconf/src/mainboard/digitallogic/msm800sev/mainboard.c (Arbeitskopie)
@@ -1,144 +1,29 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
#include <console/console.h>
#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <arch/io.h>
-#include <cpu/x86/msr.h>
-#include <cpu/amd/lxdef.h>
-#include "../../../southbridge/amd/cs5536/cs5536.h"
#include "chip.h"
-/* Print the platform configuration */
-void print_conf(void) {
-#if DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
- int i;
- unsigned long iol;
- msr_t msr;
-
- int cpu_msr_defs[] = { CPU_BC_L2_CONF, CPU_IM_CONFIG,
- CPU_DM_CONFIG0, CPU_RCONF_DEFAULT,
- CPU_RCONF_BYPASS, CPU_RCONF_A0_BF, CPU_RCONF_C0_DF, CPU_RCONF_E0_FF,
- CPU_RCONF_SMM, CPU_RCONF_DMM, GLCP_DELAY_CONTROLS, GL_END
- };
-
- int gliu0_msr_defs[] = {MSR_GLIU0_BASE1, MSR_GLIU0_BASE2, MSR_GLIU0_BASE4, MSR_GLIU0_BASE5, MSR_GLIU0_BASE6,
- GLIU0_P2D_BMO_0, GLIU0_P2D_BMO_1, MSR_GLIU0_SYSMEM,
- GLIU0_P2D_RO_0, GLIU0_P2D_RO_1, GLIU0_P2D_RO_2, MSR_GLIU0_SHADOW,
- GLIU0_IOD_BM_0, GLIU0_IOD_BM_1, GLIU0_IOD_BM_2,
- GLIU0_IOD_SC_0, GLIU0_IOD_SC_1, GLIU0_IOD_SC_2, GLIU0_IOD_SC_3, GLIU0_IOD_SC_4, GLIU0_IOD_SC_5,
- GLIU0_GLD_MSR_COH, GL_END
- };
-
- int gliu1_msr_defs[] = {MSR_GLIU1_BASE1, MSR_GLIU1_BASE2, MSR_GLIU1_BASE3, MSR_GLIU1_BASE4, MSR_GLIU1_BASE5, MSR_GLIU1_BASE6,
- MSR_GLIU1_BASE7, MSR_GLIU1_BASE8, MSR_GLIU1_BASE9, MSR_GLIU1_BASE10,
- GLIU1_P2D_R_0, GLIU1_P2D_R_1, GLIU1_P2D_R_2, GLIU1_P2D_R_3, MSR_GLIU1_SHADOW,
- GLIU1_IOD_BM_0, GLIU1_IOD_BM_1, GLIU1_IOD_BM_2,
- GLIU1_IOD_SC_0, GLIU1_IOD_SC_1, GLIU1_IOD_SC_2, GLIU1_IOD_SC_3,
- GLIU1_GLD_MSR_COH, GL_END
- };
-
- int rconf_msr[] = { CPU_RCONF0, CPU_RCONF1, CPU_RCONF2, CPU_RCONF3, CPU_RCONF4,
- CPU_RCONF5, CPU_RCONF6, CPU_RCONF7, GL_END
- };
-
- int cs5536_msr[] = { MDD_LBAR_GPIO, MDD_LBAR_FLSH0, MDD_LBAR_FLSH1, MDD_LEG_IO, MDD_PIN_OPT,
- MDD_IRQM_ZLOW, MDD_IRQM_ZHIGH, MDD_IRQM_PRIM, GL_END
- };
-
- int pci_msr[] = { GLPCI_CTRL, GLPCI_ARB, GLPCI_REN, GLPCI_A0_BF, GLPCI_C0_DF, GLPCI_E0_FF,
- GLPCI_RC0, GLPCI_RC1, GLPCI_RC2, GLPCI_RC3, GLPCI_ExtMSR, GLPCI_SPARE,
- GL_END
- };
-
- int dma_msr[] = { MDD_DMA_MAP, MDD_DMA_SHAD1, MDD_DMA_SHAD2, MDD_DMA_SHAD3, MDD_DMA_SHAD4,
- MDD_DMA_SHAD5, MDD_DMA_SHAD6, MDD_DMA_SHAD7, MDD_DMA_SHAD8,
- MDD_DMA_SHAD9, GL_END
- };
-
-
- printk_debug("---------- CPU ------------\n");
-
- for(i = 0; cpu_msr_defs[i] != GL_END; i++) {
- msr = rdmsr(cpu_msr_defs[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", cpu_msr_defs[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- GLIU 0 ------------\n");
-
- for(i = 0; gliu0_msr_defs[i] != GL_END; i++) {
- msr = rdmsr(gliu0_msr_defs[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", gliu0_msr_defs[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- GLIU 1 ------------\n");
-
- for(i = 0; gliu1_msr_defs[i] != GL_END; i++) {
- msr = rdmsr(gliu1_msr_defs[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", gliu1_msr_defs[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- RCONF ------------\n");
-
- for(i = 0; rconf_msr[i] != GL_END; i++) {
- msr = rdmsr(rconf_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", rconf_msr[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- VARIA ------------\n");
- msr = rdmsr(0x51300010);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51300010, msr.hi, msr.lo);
-
- msr = rdmsr(0x51400015);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51400015, msr.hi, msr.lo);
-
- printk_debug("---------- DIVIL IRQ ------------\n");
- msr = rdmsr(MDD_IRQM_YLOW);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YLOW, msr.hi, msr.lo);
- msr = rdmsr(MDD_IRQM_YHIGH);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YHIGH, msr.hi, msr.lo);
- msr = rdmsr(MDD_IRQM_ZLOW);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZLOW, msr.hi, msr.lo);
- msr = rdmsr(MDD_IRQM_ZHIGH);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZHIGH, msr.hi, msr.lo);
-
-
- printk_debug("---------- PCI ------------\n");
-
- for(i = 0; pci_msr[i] != GL_END; i++) {
- msr = rdmsr(pci_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", pci_msr[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- LPC/UART DMA ------------\n");
-
- for(i = 0; dma_msr[i] != GL_END; i++) {
- msr = rdmsr(dma_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", dma_msr[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- CS5536 ------------\n");
-
- for(i = 0; cs5536_msr[i] != GL_END; i++) {
- msr = rdmsr(cs5536_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", cs5536_msr[i], msr.hi, msr.lo);
- }
-
- iol = inl(GPIOL_INPUT_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n", GPIOL_INPUT_ENABLE, iol);
- iol = inl(GPIOL_EVENTS_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n", GPIOL_EVENTS_ENABLE, iol);
- iol = inl(GPIOL_INPUT_INVERT_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n", GPIOL_INPUT_INVERT_ENABLE, iol);
- iol = inl(GPIO_MAPPER_X);
- printk_debug("IOR 0x%08X is now 0x%08X\n", GPIO_MAPPER_X, iol);
-#endif //DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
-}
-
-static void init(struct device *dev) {
-
+static void init(struct device *dev)
+{
printk_debug("MSM800SEV ENTER %s\n", __FUNCTION__);
-
printk_debug("MSM800SEV EXIT %s\n", __FUNCTION__);
}
Index: LinuxBIOSv2-printconf/src/mainboard/amd/norwich/mainboard.c
===================================================================
--- LinuxBIOSv2-printconf/src/mainboard/amd/norwich/mainboard.c (Revision 3086)
+++ LinuxBIOSv2-printconf/src/mainboard/amd/norwich/mainboard.c (Arbeitskopie)
@@ -19,162 +19,8 @@
#include <console/console.h>
#include <device/device.h>
-#include <arch/io.h>
-#include <cpu/x86/msr.h>
-#include <cpu/amd/lxdef.h>
-#include <device/pci_def.h>
-#include "../../../southbridge/amd/cs5536/cs5536.h"
#include "chip.h"
-/* Print the platform configuration - do before PCI init or it will not
- * work right.
- */
-void print_conf(void)
-{
-#if DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
- int i;
- unsigned long iol;
- msr_t msr;
-
- int cpu_msr_defs[] = { CPU_BC_L2_CONF, CPU_IM_CONFIG, CPU_DM_CONFIG0,
- CPU_RCONF_DEFAULT, CPU_RCONF_BYPASS, CPU_RCONF_A0_BF,
- CPU_RCONF_C0_DF, CPU_RCONF_E0_FF, CPU_RCONF_SMM, CPU_RCONF_DMM,
- GLCP_DELAY_CONTROLS, GL_END
- };
-
- int gliu0_msr_defs[] = { MSR_GLIU0_BASE1, MSR_GLIU0_BASE2,
- MSR_GLIU0_BASE4, MSR_GLIU0_BASE5, MSR_GLIU0_BASE6,
- GLIU0_P2D_BMO_0, GLIU0_P2D_BMO_1, MSR_GLIU0_SYSMEM,
- GLIU0_P2D_RO_0, GLIU0_P2D_RO_1, GLIU0_P2D_RO_2,
- MSR_GLIU0_SHADOW, GLIU0_IOD_BM_0, GLIU0_IOD_BM_1,
- GLIU0_IOD_BM_2, GLIU0_IOD_SC_0, GLIU0_IOD_SC_1, GLIU0_IOD_SC_2,
- GLIU0_IOD_SC_3, GLIU0_IOD_SC_4, GLIU0_IOD_SC_5,
- GLIU0_GLD_MSR_COH, GL_END
- };
-
- int gliu1_msr_defs[] = { MSR_GLIU1_BASE1, MSR_GLIU1_BASE2,
- MSR_GLIU1_BASE3, MSR_GLIU1_BASE4, MSR_GLIU1_BASE5,
- MSR_GLIU1_BASE6, MSR_GLIU1_BASE7, MSR_GLIU1_BASE8,
- MSR_GLIU1_BASE9, MSR_GLIU1_BASE10, GLIU1_P2D_R_0,
- GLIU1_P2D_R_1, GLIU1_P2D_R_2, GLIU1_P2D_R_3, MSR_GLIU1_SHADOW,
- GLIU1_IOD_BM_0, GLIU1_IOD_BM_1, GLIU1_IOD_BM_2, GLIU1_IOD_SC_0,
- GLIU1_IOD_SC_1, GLIU1_IOD_SC_2, GLIU1_IOD_SC_3,
- GLIU1_GLD_MSR_COH, GL_END
- };
-
- int rconf_msr[] = { CPU_RCONF0, CPU_RCONF1, CPU_RCONF2, CPU_RCONF3,
- CPU_RCONF4, CPU_RCONF5, CPU_RCONF6, CPU_RCONF7, GL_END
- };
-
- int cs5536_msr[] = { MDD_LBAR_GPIO, MDD_LBAR_FLSH0, MDD_LBAR_FLSH1,
- MDD_LEG_IO, MDD_PIN_OPT, MDD_IRQM_ZLOW, MDD_IRQM_ZHIGH,
- MDD_IRQM_PRIM, GL_END
- };
-
- int pci_msr[] = { GLPCI_CTRL, GLPCI_ARB, GLPCI_REN, GLPCI_A0_BF,
- GLPCI_C0_DF, GLPCI_E0_FF, GLPCI_RC0, GLPCI_RC1, GLPCI_RC2,
- GLPCI_RC3, GLPCI_ExtMSR, GLPCI_SPARE, GL_END
- };
-
- int dma_msr[] = { MDD_DMA_MAP, MDD_DMA_SHAD1, MDD_DMA_SHAD2,
- MDD_DMA_SHAD3, MDD_DMA_SHAD4, MDD_DMA_SHAD5, MDD_DMA_SHAD6,
- MDD_DMA_SHAD7, MDD_DMA_SHAD8, MDD_DMA_SHAD9, GL_END
- };
-
- printk_debug("---------- CPU ------------\n");
-
- for (i = 0; cpu_msr_defs[i] != GL_END; i++) {
- msr = rdmsr(cpu_msr_defs[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n",
- cpu_msr_defs[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- GLIU 0 ------------\n");
-
- for (i = 0; gliu0_msr_defs[i] != GL_END; i++) {
- msr = rdmsr(gliu0_msr_defs[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n",
- gliu0_msr_defs[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- GLIU 1 ------------\n");
-
- for (i = 0; gliu1_msr_defs[i] != GL_END; i++) {
- msr = rdmsr(gliu1_msr_defs[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n",
- gliu1_msr_defs[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- RCONF ------------\n");
-
- for (i = 0; rconf_msr[i] != GL_END; i++) {
- msr = rdmsr(rconf_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", rconf_msr[i],
- msr.hi, msr.lo);
- }
-
- printk_debug("---------- VARIA ------------\n");
- msr = rdmsr(0x51300010);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51300010, msr.hi,
- msr.lo);
-
- msr = rdmsr(0x51400015);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51400015, msr.hi,
- msr.lo);
-
- printk_debug("---------- DIVIL IRQ ------------\n");
- msr = rdmsr(MDD_IRQM_YLOW);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YLOW, msr.hi,
- msr.lo);
- msr = rdmsr(MDD_IRQM_YHIGH);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YHIGH,
- msr.hi, msr.lo);
- msr = rdmsr(MDD_IRQM_ZLOW);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZLOW, msr.hi,
- msr.lo);
- msr = rdmsr(MDD_IRQM_ZHIGH);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZHIGH,
- msr.hi, msr.lo);
-
- printk_debug("---------- PCI ------------\n");
-
- for (i = 0; pci_msr[i] != GL_END; i++) {
- msr = rdmsr(pci_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", pci_msr[i],
- msr.hi, msr.lo);
- }
-
- printk_debug("---------- LPC/UART DMA ------------\n");
-
- for (i = 0; dma_msr[i] != GL_END; i++) {
- msr = rdmsr(dma_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", dma_msr[i],
- msr.hi, msr.lo);
- }
-
- printk_debug("---------- CS5536 ------------\n");
-
- for (i = 0; cs5536_msr[i] != GL_END; i++) {
- msr = rdmsr(cs5536_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", cs5536_msr[i],
- msr.hi, msr.lo);
- }
-
- iol = inl(GPIO_IO_BASE + GPIOL_INPUT_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n",
- GPIO_IO_BASE + GPIOL_INPUT_ENABLE, iol);
- iol = inl(GPIOL_EVENTS_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n",
- GPIO_IO_BASE + GPIOL_EVENTS_ENABLE, iol);
- iol = inl(GPIOL_INPUT_INVERT_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n",
- GPIO_IO_BASE + GPIOL_INPUT_INVERT_ENABLE, iol);
- iol = inl(GPIO_MAPPER_X);
- printk_debug("IOR 0x%08X is now 0x%08X\n", GPIO_IO_BASE + GPIO_MAPPER_X,
- iol);
-#endif //DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
-}
-
static void init(struct device *dev)
{
printk_debug("Norwich ENTER %s\n", __FUNCTION__);
@@ -188,6 +34,5 @@
struct chip_operations mainboard_amd_norwich_ops = {
CHIP_NAME("AMD Norwich Mainboard")
- .enable_dev = enable_dev,
-
+ .enable_dev = enable_dev,
};
Index: LinuxBIOSv2-printconf/src/mainboard/amd/db800/mainboard.c
===================================================================
--- LinuxBIOSv2-printconf/src/mainboard/amd/db800/mainboard.c (Revision 3086)
+++ LinuxBIOSv2-printconf/src/mainboard/amd/db800/mainboard.c (Arbeitskopie)
@@ -19,162 +19,8 @@
#include <console/console.h>
#include <device/device.h>
-#include <arch/io.h>
-#include <cpu/x86/msr.h>
-#include <cpu/amd/lxdef.h>
-#include <device/pci_def.h>
-#include "../../../southbridge/amd/cs5536/cs5536.h"
#include "chip.h"
-/* Print the platform configuration - do before PCI init or it will not
- * work right.
- */
-void print_conf(void)
-{
-#if DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
- int i;
- unsigned long iol;
- msr_t msr;
-
- int cpu_msr_defs[] = { CPU_BC_L2_CONF, CPU_IM_CONFIG, CPU_DM_CONFIG0,
- CPU_RCONF_DEFAULT, CPU_RCONF_BYPASS, CPU_RCONF_A0_BF,
- CPU_RCONF_C0_DF, CPU_RCONF_E0_FF, CPU_RCONF_SMM, CPU_RCONF_DMM,
- GLCP_DELAY_CONTROLS, GL_END
- };
-
- int gliu0_msr_defs[] = { MSR_GLIU0_BASE1, MSR_GLIU0_BASE2,
- MSR_GLIU0_BASE4, MSR_GLIU0_BASE5, MSR_GLIU0_BASE6,
- GLIU0_P2D_BMO_0, GLIU0_P2D_BMO_1, MSR_GLIU0_SYSMEM,
- GLIU0_P2D_RO_0, GLIU0_P2D_RO_1, GLIU0_P2D_RO_2,
- MSR_GLIU0_SHADOW, GLIU0_IOD_BM_0, GLIU0_IOD_BM_1,
- GLIU0_IOD_BM_2, GLIU0_IOD_SC_0, GLIU0_IOD_SC_1, GLIU0_IOD_SC_2,
- GLIU0_IOD_SC_3, GLIU0_IOD_SC_4, GLIU0_IOD_SC_5,
- GLIU0_GLD_MSR_COH, GL_END
- };
-
- int gliu1_msr_defs[] = { MSR_GLIU1_BASE1, MSR_GLIU1_BASE2,
- MSR_GLIU1_BASE3, MSR_GLIU1_BASE4, MSR_GLIU1_BASE5,
- MSR_GLIU1_BASE6, MSR_GLIU1_BASE7, MSR_GLIU1_BASE8,
- MSR_GLIU1_BASE9, MSR_GLIU1_BASE10, GLIU1_P2D_R_0,
- GLIU1_P2D_R_1, GLIU1_P2D_R_2, GLIU1_P2D_R_3, MSR_GLIU1_SHADOW,
- GLIU1_IOD_BM_0, GLIU1_IOD_BM_1, GLIU1_IOD_BM_2, GLIU1_IOD_SC_0,
- GLIU1_IOD_SC_1, GLIU1_IOD_SC_2, GLIU1_IOD_SC_3,
- GLIU1_GLD_MSR_COH, GL_END
- };
-
- int rconf_msr[] = { CPU_RCONF0, CPU_RCONF1, CPU_RCONF2, CPU_RCONF3,
- CPU_RCONF4, CPU_RCONF5, CPU_RCONF6, CPU_RCONF7, GL_END
- };
-
- int cs5536_msr[] = { MDD_LBAR_GPIO, MDD_LBAR_FLSH0, MDD_LBAR_FLSH1,
- MDD_LEG_IO, MDD_PIN_OPT, MDD_IRQM_ZLOW, MDD_IRQM_ZHIGH,
- MDD_IRQM_PRIM, GL_END
- };
-
- int pci_msr[] = { GLPCI_CTRL, GLPCI_ARB, GLPCI_REN, GLPCI_A0_BF,
- GLPCI_C0_DF, GLPCI_E0_FF, GLPCI_RC0, GLPCI_RC1, GLPCI_RC2,
- GLPCI_RC3, GLPCI_ExtMSR, GLPCI_SPARE, GL_END
- };
-
- int dma_msr[] = { MDD_DMA_MAP, MDD_DMA_SHAD1, MDD_DMA_SHAD2,
- MDD_DMA_SHAD3, MDD_DMA_SHAD4, MDD_DMA_SHAD5, MDD_DMA_SHAD6,
- MDD_DMA_SHAD7, MDD_DMA_SHAD8, MDD_DMA_SHAD9, GL_END
- };
-
- printk_debug("---------- CPU ------------\n");
-
- for (i = 0; cpu_msr_defs[i] != GL_END; i++) {
- msr = rdmsr(cpu_msr_defs[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n",
- cpu_msr_defs[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- GLIU 0 ------------\n");
-
- for (i = 0; gliu0_msr_defs[i] != GL_END; i++) {
- msr = rdmsr(gliu0_msr_defs[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n",
- gliu0_msr_defs[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- GLIU 1 ------------\n");
-
- for (i = 0; gliu1_msr_defs[i] != GL_END; i++) {
- msr = rdmsr(gliu1_msr_defs[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n",
- gliu1_msr_defs[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- RCONF ------------\n");
-
- for (i = 0; rconf_msr[i] != GL_END; i++) {
- msr = rdmsr(rconf_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", rconf_msr[i],
- msr.hi, msr.lo);
- }
-
- printk_debug("---------- VARIA ------------\n");
- msr = rdmsr(0x51300010);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51300010, msr.hi,
- msr.lo);
-
- msr = rdmsr(0x51400015);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51400015, msr.hi,
- msr.lo);
-
- printk_debug("---------- DIVIL IRQ ------------\n");
- msr = rdmsr(MDD_IRQM_YLOW);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YLOW, msr.hi,
- msr.lo);
- msr = rdmsr(MDD_IRQM_YHIGH);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YHIGH,
- msr.hi, msr.lo);
- msr = rdmsr(MDD_IRQM_ZLOW);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZLOW, msr.hi,
- msr.lo);
- msr = rdmsr(MDD_IRQM_ZHIGH);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZHIGH,
- msr.hi, msr.lo);
-
- printk_debug("---------- PCI ------------\n");
-
- for (i = 0; pci_msr[i] != GL_END; i++) {
- msr = rdmsr(pci_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", pci_msr[i],
- msr.hi, msr.lo);
- }
-
- printk_debug("---------- LPC/UART DMA ------------\n");
-
- for (i = 0; dma_msr[i] != GL_END; i++) {
- msr = rdmsr(dma_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", dma_msr[i],
- msr.hi, msr.lo);
- }
-
- printk_debug("---------- CS5536 ------------\n");
-
- for (i = 0; cs5536_msr[i] != GL_END; i++) {
- msr = rdmsr(cs5536_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", cs5536_msr[i],
- msr.hi, msr.lo);
- }
-
- iol = inl(GPIO_IO_BASE + GPIOL_INPUT_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n",
- GPIO_IO_BASE + GPIOL_INPUT_ENABLE, iol);
- iol = inl(GPIOL_EVENTS_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n",
- GPIO_IO_BASE + GPIOL_EVENTS_ENABLE, iol);
- iol = inl(GPIOL_INPUT_INVERT_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n",
- GPIO_IO_BASE + GPIOL_INPUT_INVERT_ENABLE, iol);
- iol = inl(GPIO_MAPPER_X);
- printk_debug("IOR 0x%08X is now 0x%08X\n", GPIO_IO_BASE + GPIO_MAPPER_X,
- iol);
-#endif //DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
-}
-
static void init(struct device *dev)
{
printk_debug("AMD DB800 ENTER %s\n", __FUNCTION__);
@@ -189,5 +35,4 @@
struct chip_operations mainboard_amd_db800_ops = {
CHIP_NAME("AMD DB800 Mainboard")
.enable_dev = enable_dev,
-
};
Index: LinuxBIOSv2-printconf/src/mainboard/pcengines/alix1c/mainboard.c
===================================================================
--- LinuxBIOSv2-printconf/src/mainboard/pcengines/alix1c/mainboard.c (Revision 3086)
+++ LinuxBIOSv2-printconf/src/mainboard/pcengines/alix1c/mainboard.c (Arbeitskopie)
@@ -19,140 +19,8 @@
#include <console/console.h>
#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include <cpu/x86/msr.h>
-#include <cpu/amd/lxdef.h>
-#include "../../../southbridge/amd/cs5536/cs5536.h"
#include "chip.h"
-/* Print the platform configuration. */
-void print_conf(void) {
-#if DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
- int i;
- unsigned long iol;
- msr_t msr;
-
- int cpu_msr_defs[] = { CPU_BC_L2_CONF, CPU_IM_CONFIG,
- CPU_DM_CONFIG0, CPU_RCONF_DEFAULT,
- CPU_RCONF_BYPASS, CPU_RCONF_A0_BF, CPU_RCONF_C0_DF, CPU_RCONF_E0_FF,
- CPU_RCONF_SMM, CPU_RCONF_DMM, GLCP_DELAY_CONTROLS, GL_END
- };
-
- int gliu0_msr_defs[] = {MSR_GLIU0_BASE1, MSR_GLIU0_BASE2, MSR_GLIU0_BASE4, MSR_GLIU0_BASE5, MSR_GLIU0_BASE6,
- GLIU0_P2D_BMO_0, GLIU0_P2D_BMO_1, MSR_GLIU0_SYSMEM,
- GLIU0_P2D_RO_0, GLIU0_P2D_RO_1, GLIU0_P2D_RO_2, MSR_GLIU0_SHADOW,
- GLIU0_IOD_BM_0, GLIU0_IOD_BM_1, GLIU0_IOD_BM_2,
- GLIU0_IOD_SC_0, GLIU0_IOD_SC_1, GLIU0_IOD_SC_2, GLIU0_IOD_SC_3, GLIU0_IOD_SC_4, GLIU0_IOD_SC_5,
- GLIU0_GLD_MSR_COH, GL_END
- };
-
- int gliu1_msr_defs[] = {MSR_GLIU1_BASE1, MSR_GLIU1_BASE2, MSR_GLIU1_BASE3, MSR_GLIU1_BASE4, MSR_GLIU1_BASE5, MSR_GLIU1_BASE6,
- MSR_GLIU1_BASE7, MSR_GLIU1_BASE8, MSR_GLIU1_BASE9, MSR_GLIU1_BASE10,
- GLIU1_P2D_R_0, GLIU1_P2D_R_1, GLIU1_P2D_R_2, GLIU1_P2D_R_3, MSR_GLIU1_SHADOW,
- GLIU1_IOD_BM_0, GLIU1_IOD_BM_1, GLIU1_IOD_BM_2,
- GLIU1_IOD_SC_0, GLIU1_IOD_SC_1, GLIU1_IOD_SC_2, GLIU1_IOD_SC_3,
- GLIU1_GLD_MSR_COH, GL_END
- };
-
- int rconf_msr[] = { CPU_RCONF0, CPU_RCONF1, CPU_RCONF2, CPU_RCONF3, CPU_RCONF4,
- CPU_RCONF5, CPU_RCONF6, CPU_RCONF7, GL_END
- };
-
- int cs5536_msr[] = { MDD_LBAR_GPIO, MDD_LBAR_FLSH0, MDD_LBAR_FLSH1, MDD_LEG_IO, MDD_PIN_OPT,
- MDD_IRQM_ZLOW, MDD_IRQM_ZHIGH, MDD_IRQM_PRIM, GL_END
- };
-
- int pci_msr[] = { GLPCI_CTRL, GLPCI_ARB, GLPCI_REN, GLPCI_A0_BF, GLPCI_C0_DF, GLPCI_E0_FF,
- GLPCI_RC0, GLPCI_RC1, GLPCI_RC2, GLPCI_RC3, GLPCI_ExtMSR, GLPCI_SPARE,
- GL_END
- };
-
- int dma_msr[] = { MDD_DMA_MAP, MDD_DMA_SHAD1, MDD_DMA_SHAD2, MDD_DMA_SHAD3, MDD_DMA_SHAD4,
- MDD_DMA_SHAD5, MDD_DMA_SHAD6, MDD_DMA_SHAD7, MDD_DMA_SHAD8,
- MDD_DMA_SHAD9, GL_END
- };
-
-
- printk_debug("---------- CPU ------------\n");
-
- for(i = 0; cpu_msr_defs[i] != GL_END; i++) {
- msr = rdmsr(cpu_msr_defs[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", cpu_msr_defs[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- GLIU 0 ------------\n");
-
- for(i = 0; gliu0_msr_defs[i] != GL_END; i++) {
- msr = rdmsr(gliu0_msr_defs[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", gliu0_msr_defs[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- GLIU 1 ------------\n");
-
- for(i = 0; gliu1_msr_defs[i] != GL_END; i++) {
- msr = rdmsr(gliu1_msr_defs[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", gliu1_msr_defs[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- RCONF ------------\n");
-
- for(i = 0; rconf_msr[i] != GL_END; i++) {
- msr = rdmsr(rconf_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", rconf_msr[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- VARIA ------------\n");
- msr = rdmsr(0x51300010);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51300010, msr.hi, msr.lo);
-
- msr = rdmsr(0x51400015);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51400015, msr.hi, msr.lo);
-
- printk_debug("---------- DIVIL IRQ ------------\n");
- msr = rdmsr(MDD_IRQM_YLOW);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YLOW, msr.hi, msr.lo);
- msr = rdmsr(MDD_IRQM_YHIGH);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YHIGH, msr.hi, msr.lo);
- msr = rdmsr(MDD_IRQM_ZLOW);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZLOW, msr.hi, msr.lo);
- msr = rdmsr(MDD_IRQM_ZHIGH);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZHIGH, msr.hi, msr.lo);
-
-
- printk_debug("---------- PCI ------------\n");
-
- for(i = 0; pci_msr[i] != GL_END; i++) {
- msr = rdmsr(pci_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", pci_msr[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- LPC/UART DMA ------------\n");
-
- for(i = 0; dma_msr[i] != GL_END; i++) {
- msr = rdmsr(dma_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", dma_msr[i], msr.hi, msr.lo);
- }
-
- printk_debug("---------- CS5536 ------------\n");
-
- for(i = 0; cs5536_msr[i] != GL_END; i++) {
- msr = rdmsr(cs5536_msr[i]);
- printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", cs5536_msr[i], msr.hi, msr.lo);
- }
-
- iol = inl(GPIOL_INPUT_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n", GPIOL_INPUT_ENABLE, iol);
- iol = inl(GPIOL_EVENTS_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n", GPIOL_EVENTS_ENABLE, iol);
- iol = inl(GPIOL_INPUT_INVERT_ENABLE);
- printk_debug("IOR 0x%08X is now 0x%08X\n", GPIOL_INPUT_INVERT_ENABLE, iol);
- iol = inl(GPIO_MAPPER_X);
- printk_debug("IOR 0x%08X is now 0x%08X\n", GPIO_MAPPER_X, iol);
-#endif //DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
-}
-
static void init(struct device *dev)
{
printk_debug("ALIX1.C ENTER %s\n", __FUNCTION__);
Index: LinuxBIOSv2-printconf/src/northbridge/amd/lx/northbridge.c
===================================================================
--- LinuxBIOSv2-printconf/src/northbridge/amd/lx/northbridge.c (Revision 3086)
+++ LinuxBIOSv2-printconf/src/northbridge/amd/lx/northbridge.c (Arbeitskopie)
@@ -34,7 +34,9 @@
#include <cpu/amd/vr.h>
#include "chip.h"
#include "northbridge.h"
+#include "../../../southbridge/amd/cs5536/cs5536.h"
+
/* here is programming for the various MSRs.*/
#define IM_QWAIT 0x100000
@@ -76,7 +78,6 @@
extern void graphics_init(void);
extern void cpubug(void);
extern void chipsetinit(void);
-extern void print_conf(void);
extern uint32_t get_systop(void);
void northbridge_init_early(void);
@@ -118,6 +119,155 @@
0}
};
+/* Print the platform configuration - do before PCI init or it will not
+ * work right.
+ */
+void print_conf(void)
+{
+#if DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
+ int i;
+ unsigned long iol;
+ msr_t msr;
+
+ int cpu_msr_defs[] = { CPU_BC_L2_CONF, CPU_IM_CONFIG, CPU_DM_CONFIG0,
+ CPU_RCONF_DEFAULT, CPU_RCONF_BYPASS, CPU_RCONF_A0_BF,
+ CPU_RCONF_C0_DF, CPU_RCONF_E0_FF, CPU_RCONF_SMM, CPU_RCONF_DMM,
+ GLCP_DELAY_CONTROLS, GL_END
+ };
+
+ int gliu0_msr_defs[] = { MSR_GLIU0_BASE1, MSR_GLIU0_BASE2,
+ MSR_GLIU0_BASE4, MSR_GLIU0_BASE5, MSR_GLIU0_BASE6,
+ GLIU0_P2D_BMO_0, GLIU0_P2D_BMO_1, MSR_GLIU0_SYSMEM,
+ GLIU0_P2D_RO_0, GLIU0_P2D_RO_1, GLIU0_P2D_RO_2,
+ MSR_GLIU0_SHADOW, GLIU0_IOD_BM_0, GLIU0_IOD_BM_1,
+ GLIU0_IOD_BM_2, GLIU0_IOD_SC_0, GLIU0_IOD_SC_1, GLIU0_IOD_SC_2,
+ GLIU0_IOD_SC_3, GLIU0_IOD_SC_4, GLIU0_IOD_SC_5,
+ GLIU0_GLD_MSR_COH, GL_END
+ };
+
+ int gliu1_msr_defs[] = { MSR_GLIU1_BASE1, MSR_GLIU1_BASE2,
+ MSR_GLIU1_BASE3, MSR_GLIU1_BASE4, MSR_GLIU1_BASE5,
+ MSR_GLIU1_BASE6, MSR_GLIU1_BASE7, MSR_GLIU1_BASE8,
+ MSR_GLIU1_BASE9, MSR_GLIU1_BASE10, GLIU1_P2D_R_0,
+ GLIU1_P2D_R_1, GLIU1_P2D_R_2, GLIU1_P2D_R_3, MSR_GLIU1_SHADOW,
+ GLIU1_IOD_BM_0, GLIU1_IOD_BM_1, GLIU1_IOD_BM_2, GLIU1_IOD_SC_0,
+ GLIU1_IOD_SC_1, GLIU1_IOD_SC_2, GLIU1_IOD_SC_3,
+ GLIU1_GLD_MSR_COH, GL_END
+ };
+
+ int rconf_msr[] = { CPU_RCONF0, CPU_RCONF1, CPU_RCONF2, CPU_RCONF3,
+ CPU_RCONF4, CPU_RCONF5, CPU_RCONF6, CPU_RCONF7, GL_END
+ };
+
+ int cs5536_msr[] = { MDD_LBAR_GPIO, MDD_LBAR_FLSH0, MDD_LBAR_FLSH1,
+ MDD_LEG_IO, MDD_PIN_OPT, MDD_IRQM_ZLOW, MDD_IRQM_ZHIGH,
+ MDD_IRQM_PRIM, GL_END
+ };
+
+ int pci_msr[] = { GLPCI_CTRL, GLPCI_ARB, GLPCI_REN, GLPCI_A0_BF,
+ GLPCI_C0_DF, GLPCI_E0_FF, GLPCI_RC0, GLPCI_RC1, GLPCI_RC2,
+ GLPCI_RC3, GLPCI_ExtMSR, GLPCI_SPARE, GL_END
+ };
+
+ int dma_msr[] = { MDD_DMA_MAP, MDD_DMA_SHAD1, MDD_DMA_SHAD2,
+ MDD_DMA_SHAD3, MDD_DMA_SHAD4, MDD_DMA_SHAD5, MDD_DMA_SHAD6,
+ MDD_DMA_SHAD7, MDD_DMA_SHAD8, MDD_DMA_SHAD9, GL_END
+ };
+
+ printk_debug("---------- CPU ------------\n");
+
+ for (i = 0; cpu_msr_defs[i] != GL_END; i++) {
+ msr = rdmsr(cpu_msr_defs[i]);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n",
+ cpu_msr_defs[i], msr.hi, msr.lo);
+ }
+
+ printk_debug("---------- GLIU 0 ------------\n");
+
+ for (i = 0; gliu0_msr_defs[i] != GL_END; i++) {
+ msr = rdmsr(gliu0_msr_defs[i]);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n",
+ gliu0_msr_defs[i], msr.hi, msr.lo);
+ }
+
+ printk_debug("---------- GLIU 1 ------------\n");
+
+ for (i = 0; gliu1_msr_defs[i] != GL_END; i++) {
+ msr = rdmsr(gliu1_msr_defs[i]);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n",
+ gliu1_msr_defs[i], msr.hi, msr.lo);
+ }
+
+ printk_debug("---------- RCONF ------------\n");
+
+ for (i = 0; rconf_msr[i] != GL_END; i++) {
+ msr = rdmsr(rconf_msr[i]);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", rconf_msr[i],
+ msr.hi, msr.lo);
+ }
+
+ printk_debug("---------- VARIA ------------\n");
+ msr = rdmsr(0x51300010);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51300010, msr.hi,
+ msr.lo);
+
+ msr = rdmsr(0x51400015);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", 0x51400015, msr.hi,
+ msr.lo);
+
+ printk_debug("---------- DIVIL IRQ ------------\n");
+ msr = rdmsr(MDD_IRQM_YLOW);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YLOW, msr.hi,
+ msr.lo);
+ msr = rdmsr(MDD_IRQM_YHIGH);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_YHIGH,
+ msr.hi, msr.lo);
+ msr = rdmsr(MDD_IRQM_ZLOW);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZLOW, msr.hi,
+ msr.lo);
+ msr = rdmsr(MDD_IRQM_ZHIGH);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", MDD_IRQM_ZHIGH,
+ msr.hi, msr.lo);
+
+ printk_debug("---------- PCI ------------\n");
+
+ for (i = 0; pci_msr[i] != GL_END; i++) {
+ msr = rdmsr(pci_msr[i]);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", pci_msr[i],
+ msr.hi, msr.lo);
+ }
+
+ printk_debug("---------- LPC/UART DMA ------------\n");
+
+ for (i = 0; dma_msr[i] != GL_END; i++) {
+ msr = rdmsr(dma_msr[i]);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", dma_msr[i],
+ msr.hi, msr.lo);
+ }
+
+ printk_debug("---------- CS5536 ------------\n");
+
+ for (i = 0; cs5536_msr[i] != GL_END; i++) {
+ msr = rdmsr(cs5536_msr[i]);
+ printk_debug("MSR 0x%08X is now 0x%08X:0x%08X\n", cs5536_msr[i],
+ msr.hi, msr.lo);
+ }
+
+ iol = inl(GPIO_IO_BASE + GPIOL_INPUT_ENABLE);
+ printk_debug("IOR 0x%08X is now 0x%08X\n",
+ GPIO_IO_BASE + GPIOL_INPUT_ENABLE, iol);
+ iol = inl(GPIOL_EVENTS_ENABLE);
+ printk_debug("IOR 0x%08X is now 0x%08X\n",
+ GPIO_IO_BASE + GPIOL_EVENTS_ENABLE, iol);
+ iol = inl(GPIOL_INPUT_INVERT_ENABLE);
+ printk_debug("IOR 0x%08X is now 0x%08X\n",
+ GPIO_IO_BASE + GPIOL_INPUT_INVERT_ENABLE, iol);
+ iol = inl(GPIO_MAPPER_X);
+ printk_debug("IOR 0x%08X is now 0x%08X\n", GPIO_IO_BASE + GPIO_MAPPER_X,
+ iol);
+#endif //DEFAULT_CONSOLE_LOGLEVEL >= BIOS_ERR
+}
+
/* todo: add a resource record. We don't do this here because this may be called when
* very little of the platform is actually working.
*/