Hello, I almost have the system I have been woring on for so long now running on the console (vga is next). Here is a recap of my hardware:
i82830 Northbridge i82801db Southbridge (using i82801XX) SMSC lpc47m192 Superio (using smscsuperio)
For some reason it keeps restarting over and over again right after the "SMBus controller enabled" message (see below). Any ideas what could be causing this?
Also, since I have something happening (console output) and I am diffinatly going to see this through can I submit the RCA RM4100 and i82830 code as a "WIP".
Thanks - Joe ------------------------------------------------------------------
LinuxBIOS-2.0.0.0Fallback Mon Sep 3 21:23:01 EDT 2007 starting... Setting initial registers.... Initial registers have been set. No DIMM found in slot 00 DRB 0x60 has been set to 0x00 DRB1 0x61 has been set to 0x00 Found DIMM in slot 01 DIMM is 0x0080 on side 1 DIMM is 0x0000 on side 2 DRB2 0x62 has been set to 0x04 DRB3 0x63 has been set to 0x04 No DIMM found in slot 00, setting DRA to 0xFF DRA 0x70 has been set to 0xff Found DIMM in slot 01, setting DRA... DRA 0x71 has been set to 0xf1 RAM Enable 1: Apply NOP Sending RAM command 0x00000010 to 0x00000000 RAM Enable 2: Precharge all Sending RAM command 0x00000020 to 0x00000000 RAM Enable 3: CBR Sending RAM command 0x00000060 to 0x00000000 RAM Enable 4: Mode register set Sending RAM command 0x00000030 to 0x000001d0 RAM Enable 5: Normal operation Sending RAM command 0x20000170 to 0x00000000 Northbridge following SDRAM init: PCI: 00:00.00 00: 86 80 75 35 06 00 10 00 04 00 00 06 00 00 00 00 10: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 40: 09 00 05 01 00 00 00 00 00 00 00 00 02 28 00 0e 50: 72 a0 0a 00 00 00 00 00 00 30 33 33 33 33 33 33 60: 00 00 04 04 00 00 00 00 00 00 00 00 00 00 00 00 70: ff f1 ff ff 00 00 00 00 10 00 00 00 70 01 00 20 80: 00 00 00 00 00 00 00 00 00 d0 00 40 00 00 00 00 90: 02 38 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 02 00 20 00 17 02 00 1f 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 54 0e 41 a2 99 01 00 c0 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 fc 14 00 00 f0: 11 11 01 00 00 00 0b 05 37 d6 30 cf 22 cf 23 cf Copying LinuxBIOS to RAM. Jumping to LinuxBIOS. SMBus controller enabled
LinuxBIOS-2.0.0.0Fallback Mon Sep 3 21:23:01 EDT 2007 starting... Setting initial registers.... Initial registers have been set. No DIMM found in slot 00 DRB 0x60 has been set to 0x00 DRB1 0x61 has been set to 0x00 Found DIMM in slot 01 DIMM is 0x0080 on side 1 DIMM is 0x0000 on side 2 DRB2 0x62 has been set to 0x04 DRB3 0x63 has been set to 0x04 No DIMM found in slot 00, setting DRA to 0xFF DRA 0x70 has been set to 0xff Found DIMM in slot 01, setting DRA... DRA 0x71 has been set to 0xf1 RAM Enable 1: Apply NOP Sending RAM command 0x00000010 to 0x00000000 RAM Enable 2: Precharge all Sending RAM command 0x00000020 to 0x00000000 RAM Enable 3: CBR Sending RAM command 0x00000060 to 0x00000000 RAM Enable 4: Mode register set Sending RAM command 0x00000030 to 0x000001d0 RAM Enable 5: Normal operation Sending RAM command 0x20000170 to 0x00000000 Northbridge following SDRAM init: PCI: 00:00.00 00: 86 80 75 35 06 00 10 00 04 00 00 06 00 00 00 00 10: 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 40: 09 00 05 01 00 00 00 00 00 00 00 00 02 28 00 0e 50: 72 a0 0a 00 00 00 00 00 00 30 33 33 33 33 33 33 60: 00 00 04 04 00 00 00 00 00 00 00 00 00 00 00 00 70: ff f1 ff ff 00 00 00 00 10 00 00 00 70 01 00 20 80: 00 00 00 00 00 00 00 00 00 d0 00 40 00 00 00 00 90: 02 38 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 02 00 20 00 17 02 00 1f 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 54 0e 41 a2 99 01 00 c0 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 fc 14 00 00 f0: 11 11 01 00 00 00 0b 05 34 d6 30 cf 22 cf 23 cf Copying LinuxBIOS to RAM. Jumping to LinuxBIOS. SMBus controller enabled