Hi, i think the following patch should do the trick:
--- Index: src/southbridge/intel/sch/Makefile.inc =================================================================== --- src/southbridge/intel/sch/Makefile.inc (Revision 6439) +++ src/southbridge/intel/sch/Makefile.inc (Arbeitskopie) @@ -37,6 +37,6 @@
# We don't ship that, but booting without it is bound to fail cbfs-files-$(CONFIG_HAVE_CMC) += cmc.bin -cmc.bin-file := $(CONFIG_CMC_FILE) +cmc.bin-file := $(call strip_quotes,$(CONFIG_CMC_FILE)) cmc.bin-type := 0xaa cmc.bin-position := 0xfffd0000 ---
best regards,
2011/3/15 Stefan Reinauer stefan.reinauer@coreboot.org:
- Anish Patel anish.mailing.list@gmail.com [110314 20:42]:
On 03/14/11 15:19, Anish Patel wrote:
Hi All, I am trying to get coreboot running on my PC/104+ atom board. I think i have everything pretty much good to go, except for one problem. When i try to build, it says it can't find my cmc.bin file, which i have extracted from the factory bios and placed in many different locations inside the coreboot build tree. As well as tell coreboot the location of the cmc.bin file, yet everytime i build i get this error.
GEN bootblock/ldscript.ld LINK bootblock.elf OBJCOPY coreboot.bootblock make: *** No rule to make target `"cmc.bin"', needed by `build/coreboot.pre1'. Stop.
any hints on where to place this file would be greatly appreciared. as a note, i have made a oprom directory in the coreboot root. this place hold my vgabios.bin which the coreboot build system find an links properly.
thanks anish
i have found the problem reverting back the the Makefile.inc from r6199 for the sch fixed the problem.
Which Makefile.inc. Can you please send a patch?
-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot