Dear LinuxBIOS readers!
This is the automated build check service of LinuxBIOS.
The developer "ward" checked in revision 2792 to the LinuxBIOS source repository and caused the following changes:
Change Log: The s2891 ships with a 1MB rom chip. The targets/tyan/s2891/Config.lb file assumes a 1MB rom chip.
Hence the default position for the VGA bios should also assume a 1MB rom chip, instead of a 512KB chip.
Signed-off-by: Ward Vandewege ward@gnu.org Acked-by: Uwe Hermann uwe@hermann-uwe.de
Build Log: Compilation of arima:hdama is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2792&device=hdama&... Compilation of ibm:e325 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2792&device=e325&v... Compilation of ibm:e326 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2792&device=e326&v... Compilation of iei:juki-511p is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2792&device=juki-511p&... Compilation of iwill:dk8s2 is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2792&device=dk8s2&... Compilation of iwill:dk8x is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2792&device=dk8x&v... Compilation of newisys:khepri is still broken See the error log at http://qa.linuxbios.org/log_buildbrd.php?revision=2792&device=khepri&...
If something broke during this checkin please be a pain in ward's neck until the issue is fixed.
If this issue is not fixed within 24h the revision should be backed out.
Best regards, LinuxBIOS automatic build system