Hallo,
On Mon, Feb 03, 2014 at 10:16:30PM +0100, Vladimir 'φ-coder/phcoder' Serbinenko wrote:
CY8C24794-24LFXI
My guess: it's part of keyboard + touchpad Do you already know which port is USBdebug one?
Yes, I found out with a USB stick, dmesg and lsusb -t.
Did you already test USB debug with dbgp?
Yes, I tested USB debug for the Thinkpad X60, I assume it would work the same for Macbook.
Um, there are much more 00's than for the Thinkpad X60. Not sure what
this means Different firmware. Most likely less functions are on it (keyboard and touchpad are on USB and handled by another chip). You'll need to make directory ec/apple/h8 for it and no code from lenovo/h8 will be reusable.
What about those Block Protect things?
Forget them for now, you'll be flashing externally until you have working version anyway
I updated the webpage about what I did ( http://macbook.donderklumpen.de/coreboot/ ). At the moment I am looking at x60's romstage.c because I'd plan to copy as much as possible from it. At the function static void ich7_enable_lpc(void) I got stuck. I can make some guesses, but don't know where the details are documented. If you could point me to any documentation, I'd love to read it. I tried ich7 datasheet and LPC Interface Specification but did not spot what the function ich7_enable_lpc does.
By comparing the output of lspci -nnvvvxxx -s 00:1f.0 on the Thinkpad with coreboot and the Macbook with factory bios I get the following:
on the Thinkpad $ lspci -nnvvvxxx -s 00:1f.0 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: Lenovo ThinkPad T60/R60 series [17aa:2009] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: lpc_ich Kernel modules: intel_rng, lpc_ich, leds_ss4200 00: 86 80 b9 27 07 00 10 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 aa 17 09 20 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 40: 01 05 00 00 80 00 00 00 81 04 00 00 10 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 80 80 80 80 d0 00 00 00 80 80 80 80 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 02 0d 1f 01 16 7c 00 e1 15 0c 00 81 16 1c 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: ac 06 00 00 30 00 00 00 13 1c 0a 00 00 03 00 00 b0: 00 00 f0 00 00 00 00 00 00 00 02 0a 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 33 22 11 00 67 45 00 00 cf ff 00 00 08 00 00 00 e0: 09 00 0c 10 b4 02 24 17 00 00 00 00 00 00 00 00 f0: 01 c0 d1 fe 00 00 00 00 86 0f 02 00 00 00 00 00
and on the Macbook $ lspci -nnvvvxxx -s 00:1f.0 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: Intel Corporation Device [8086:7270] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel driver in use: lpc_ich Kernel modules: intel_rng, lpc_ich, leds_ss4200 00: 86 80 b9 27 07 00 10 02 02 00 01 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 70 72 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 40: 01 04 00 00 80 00 00 00 01 05 00 00 10 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 80 80 80 80 d0 00 00 00 80 80 80 80 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 10 00 07 38 81 06 0c 00 41 16 0c 00 00 00 00 00 90: 01 03 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 04 02 00 00 01 00 00 00 13 1c 0a 00 00 03 00 00 b0: 00 00 f0 00 00 00 00 00 08 80 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 33 22 00 00 67 45 00 00 00 ff 00 00 00 00 00 00 e0: 09 00 0c 10 b4 02 24 17 00 00 00 00 00 00 00 00 f0: 01 c0 d1 fe 00 00 00 00 86 0f 02 00 00 00 00 00
In the Thinkpad output I can spot the values written by coreboot: 0xd0 at 0x64 // Enable Serial IRQ, this is the same for what the Macbook outputs, but where can I read that this enables serial IRQ? 0x0210 and 0x1f0d at 0x80 and 0x82 // decode ranges, the Macbook outputs different values here 0x1601, 0x007c, 0x15e1, 0x000c, 0x1681, 0x001c from 0x84 to 0x8e // the Thinkpad has three ranges while the Macbook seems to have two ranges only with differnt values. So how would I modify the ich7_enable_lpc function? Should I try to reproduce what the factory bios sets? Other from the values set in this function a few more values differ between the two computers. Better than guessing I would prefer to somewhere read about what these settings do. I just don't know where.
any help is truely appreciated with best regards Mono