Dear Coreboot Community! I have modified the following CMOS option table bit using 'nvramtool' utility from Ubuntu: 384 1 e 4 boot_option
Its default value was 'Normal', which I modified to 'Fallback'. After rebooting, the coreboot seems to be not loading the default payload. In what way I can recover it? Where does the CMOS modification resides?
I have redone the coreboot.rom flashing completely, yet the coreboot didn't load the default payload. The following is my CBFS: Performing operation on 'COREBOOT' region... Name Offset Type Size cbfs master header 0x0 cbfs header 32 fallback/romstage 0x80 stage 30868 cpu_microcode_blob.bin 0x7980 microcode 208896 fallback/ramstage 0x3aa00 stage 51629 config 0x47400 raw 749 revision 0x47740 raw 575 cmos_layout.bin 0x479c0 cmos_layout 1212 pci8086,0f31.rom 0x47ec0 optionrom 65536 fallback/dsdt.aml 0x57f40 raw 12527 fallback/payload 0x5b080 payload 61165 payload_config 0x69fc0 raw 1563 payload_revision 0x6a640 raw 243 (empty) 0x6a780 null 1333016 fsp.bin 0x1afec0 fsp 294912 (empty) 0x1f7f00 null 30168 bootblock 0x1ff500 bootblock 2480
Regards, Mohan
"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."