On 05/25/10 00:16, Joseph Smith wrote:
On 05/24/2010 04:36 PM, Nils wrote:
Hi Oliver,
Oliver wrote:
I just found http://www.coreboot.org/AMD_Geode_Porting_Guide over on the wiki and was wondering if that was maybe slighlty outdated or not needed for a Wyse S10? The S10 uses similar hardware as the S50.
The wiki page is a little outdated.
Actually the only difference is that the S50 has 128kb onboard flash, so minor difference.
Are you sure ? Joseph reported that his S30 uses a cs5535 insted of the cs5536 on the S50.
Yes my S30 has a GX2 and cs5535.From what I have read both the S30 and S50 are upgradable to the S10. It is just a bios and software upgrade.
On another note I just got a V30L, sweet little VIA C& machine....
Hope that helps.
Hmm; I thought that the S10 was the most basic version :)
Processor: AMD Geode GX 366MHz Memory: 0 Flash/128MB RAM
As the S50 reads: Processor: AMD Geode GX 366MHz Memory: 128MB Flash/256MB RAM
btw they use a gx in the spec instead of gx2; odd.
The S30 lists the same btw:
Processor: AMD Geode GX 366MHz Memory: 64MB Flash/128MB RAM
So besides the tool outputs etc etc I posted earlier; I'll take loads of pics. Do I need to pry off the CPU's heatsink for a pic of that? Since I don't know how to best re-attach it; id' like to postpone that.
Also not having a GX VSA is kinda really off-putting; it basically means I can't use corebios on this thing yet? How did people do it on the S30 and more specifically the S50? The S50 does list as being supported, how?
Oliver