Hi Michael,
On 02.10.2007 02:21, Michael van der Kolff wrote:
Uhm, just forgot to attach the additional patch I applied. Here it comes :)
On 10/2/07, Michael van der Kolff mvanderkolff@gmail.com wrote:
I just used r2816 with linuxbios_flashrom_ite_spi_restructured3.diff, along with the attached patch (which just adds the different it8716 id used on the GA-M61P-S3 board) and got the following output from flashrom -V -m gigabyte:m61ps3
Calibrating delay loop... 793M loops per second. ok No LinuxBIOS table found. WARNING: No chipset found. Flash detection will most likely fail. Found board "GIGABYTE GA-M61P-S3": Enabling flash write... Serial flash segment 0xfffe0000-0xffffffff enabled Serial flash segment 0x000e0000-0x000fffff enabled Serial flash segment 0xffee0000-0xffefffff disabled Serial flash segment 0xfff80000-0xfffeffff enabled LPC write to serial flash enabled serial flash pin 29 OK. [...] Probing for MX25L4005, 512 KB RDID returned c2 20 13 probe_spi: id1 0xc2, id2 0x2013 MX25L4005 found at physical address: 0xfff80000 Flash part is MX25L4005 (512 KB) OK, only ENABLING flash write, but NOT FLASHING.
Can you resend the patch with a signed-off-by statement (http://linuxbios.org/Development_Guidelines#Sign-off_Procedure) and a changelog entry? My code is now in subversion, so you might want to rediff your patch and check whether everything still works.
You can then include the following Acked-by in your mail: Acked-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Regards, Carl-Daniel