Hi, I'm just starting to find the time to get involved in coreboot. My board is an Advantec SOM-5781. It seems pretty close to the reference design so I thought I would give loading the vanilla dbm690t bios a shot. I have a Sempron 2100+ in a AM2 socket. ITE IT8712F SuperIO @ 0x2E.
Has anyone seen this before? It keeps happening over and over. I'll be looking in to it tonight. My understanding so far is that it is only supposed to happen once.
Thanks Dan Lykowski
coreboot-2.0.0 Tue Dec 30 10:32:31 PST 2008 starting... bsp_apicid=0x0 core0 started: SBLink=00 NC node|link=00 rs690_early_setup() get_cpu_rev EAX=0x40fc2. CPU Rev is K8_Fx. NB Revision is A12. k8_optimization() rs690_por_init sb600_early_setup() sb600_devices_por_init() sb600_devices_por_init(): SMBus Device, BDF:0-20-0 SMBus controller enabled, sb revision is 0x13 sb600_devices_por_init(): IDE Device, BDF:0-20-1 sb600_devices_por_init(): LPC Device, BDF:0-20-3 sb600_devices_por_init(): P2P Bridge, BDF:0-20-4 sb600_devices_por_init(): SATA Device, BDF:0-18-0 sb600_pmio_por_init()
INIT detected from --- { APICID = 00 NODEID = 00 COREID = 00} ---
Issuing SOFT_RESET...
coreboot-2.0.0 Tue Dec 30 10:32:31 PST 2008 starting... bsp_apicid=0x0 core0 started: SBLink=00 NC node|link=00 rs690_early_setup() get_cpu_rev EAX=0x40fc2. CPU Rev is K8_Fx. NB Revision is A12. k8_optimization() rs690_por_init sb600_early_setup() sb600_devices_por_init() sb600_devices_por_init(): SMBus Device, BDF:0-20-0 SMBus controller enabled, sb revision is 0x13 sb600_devices_por_init(): IDE Device, BDF:0-20-1 sb600_devices_por_init(): LPC Device, BDF:0-20-3 sb600_devices_por_init(): P2P Bridge, BDF:0-20-4 sb600_devices_por_init(): SATA Device, BDF:0-18-0 sb600_pmio_por_init()
INIT detected from --- { APICID = 00 NODEID = 00 COREID = 00} ---
Issuing SOFT_RESET...