Convert 12 more boards to use include statements.
abuild tested.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net
Index: LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dai_g/Config.lb =================================================================== --- LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dai_g/Config.lb (Revision 4150) +++ LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dai_g/Config.lb (Arbeitskopie) @@ -3,41 +3,9 @@ ## default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-## -## Compute the location and size of where this firmware image -## (coreboot plus bootloader) will live in the boot rom chip. -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end +include /config/nofailovercalculation128.lb
## -## Compute the start location and size size of -## The coreboot bootloader. -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of coreboot will start in the boot rom -## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can be cached to speed up coreboot, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=131072 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -## ## Set all of the defaults for an x86 architecture ##
Index: LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dhe_g/Config.lb =================================================================== --- LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dhe_g/Config.lb (Revision 4150) +++ LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dhe_g/Config.lb (Arbeitskopie) @@ -3,39 +3,8 @@ ## default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-## -## Compute the location and size of where this firmware image -## (coreboot plus bootloader) will live in the boot rom chip. -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end +include /config/nofailovercalculation128.lb
-## -## Compute the start location and size size of -## The coreboot bootloader. -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of coreboot will start in the boot rom -## -default _ROMBASE =( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can be cached to speed up coreboot. -## execution speed. -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -default XIP_ROM_SIZE=131072 -default XIP_ROM_BASE= ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -## ## Set all of the defaults for an x86 architecture ##
Index: LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dhe_g2/Config.lb =================================================================== --- LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dhe_g2/Config.lb (Revision 4150) +++ LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dhe_g2/Config.lb (Arbeitskopie) @@ -3,39 +3,8 @@ ## default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-## -## Compute the location and size of where this firmware image -## (coreboot plus bootloader) will live in the boot rom chip. -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end +include /config/nofailovercalculation128.lb
-## -## Compute the start location and size size of -## The coreboot bootloader. -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of coreboot will start in the boot rom -## -default _ROMBASE =( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can be cached to speed up coreboot. -## execution speed. -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -default XIP_ROM_SIZE=131072 -default XIP_ROM_BASE= ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -## ## Set all of the defaults for an x86 architecture ##
Index: LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dhr_ig/Config.lb =================================================================== --- LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dhr_ig/Config.lb (Revision 4150) +++ LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dhr_ig/Config.lb (Arbeitskopie) @@ -3,41 +3,9 @@ ## default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-## -## Compute the location and size of where this firmware image -## (coreboot plus bootloader) will live in the boot rom chip. -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end +include /config/nofailovercalculation128.lb
## -## Compute the start location and size size of -## The coreboot bootloader. -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of coreboot will start in the boot rom -## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can cached to speed up coreboot, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=131072 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -## ## Set all of the defaults for an x86 architecture ##
Index: LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dhr_ig2/Config.lb =================================================================== --- LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dhr_ig2/Config.lb (Revision 4150) +++ LinuxBIOSv2-Configlb_refactor/src/mainboard/supermicro/x6dhr_ig2/Config.lb (Arbeitskopie) @@ -3,41 +3,9 @@ ## default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-## -## Compute the location and size of where this firmware image -## (coreboot plus bootloader) will live in the boot rom chip. -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end +include /config/nofailovercalculation128.lb
## -## Compute the start location and size size of -## The coreboot bootloader. -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of coreboot will start in the boot rom -## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can cached to speed up coreboot, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=131072 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -## ## Set all of the defaults for an x86 architecture ##
Index: LinuxBIOSv2-Configlb_refactor/src/mainboard/kontron/986lcd-m/Config.lb =================================================================== --- LinuxBIOSv2-Configlb_refactor/src/mainboard/kontron/986lcd-m/Config.lb (Revision 4150) +++ LinuxBIOSv2-Configlb_refactor/src/mainboard/kontron/986lcd-m/Config.lb (Arbeitskopie) @@ -28,41 +28,9 @@ ## default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-## -## Compute the location and size of where this firmware image -## (coreboot plus bootloader) will live in the boot rom chip. -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end +include /config/nofailovercalculation.lb
## -## Compute the start location and size size of -## The coreboot bootloader. -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of coreboot will start in the boot rom -## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can cached to speed up coreboot, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=(64*1024) -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -## ## Set all of the defaults for an x86 architecture ##
Index: LinuxBIOSv2-Configlb_refactor/src/mainboard/dell/s1850/Config.lb =================================================================== --- LinuxBIOSv2-Configlb_refactor/src/mainboard/dell/s1850/Config.lb (Revision 4150) +++ LinuxBIOSv2-Configlb_refactor/src/mainboard/dell/s1850/Config.lb (Arbeitskopie) @@ -3,41 +3,9 @@ ## default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-## -## Compute the location and size of where this firmware image -## (coreboot plus bootloader) will live in the boot rom chip. -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end +include /config/nofailovercalculation128.lb
## -## Compute the start location and size size of -## The coreboot bootloader. -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of coreboot will start in the boot rom -## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can cached to speed up coreboot, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=131072 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -## ## Set all of the defaults for an x86 architecture ##
Index: LinuxBIOSv2-Configlb_refactor/src/mainboard/arima/hdama/Config.lb =================================================================== --- LinuxBIOSv2-Configlb_refactor/src/mainboard/arima/hdama/Config.lb (Revision 4150) +++ LinuxBIOSv2-Configlb_refactor/src/mainboard/arima/hdama/Config.lb (Arbeitskopie) @@ -1,38 +1,6 @@ -## -## Compute the location and size of where this firmware image -## (coreboot plus bootloader) will live in the boot rom chip. -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end +include /config/nofailovercalculation128.lb
## -## Compute the start location and size size of -## The coreboot bootloader. -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of coreboot will start in the boot rom -## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can cached to speed up coreboot, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=131072 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -## ## Set all of the defaults for an x86 architecture ##
Index: LinuxBIOSv2-Configlb_refactor/src/mainboard/intel/xe7501devkit/Config.lb =================================================================== --- LinuxBIOSv2-Configlb_refactor/src/mainboard/intel/xe7501devkit/Config.lb (Revision 4150) +++ LinuxBIOSv2-Configlb_refactor/src/mainboard/intel/xe7501devkit/Config.lb (Arbeitskopie) @@ -1,40 +1,5 @@ -################################################################## -## BEGIN BOILERPLATE - DO NOT EDIT -## -## Compute the location and size of where this firmware image -## (coreboot plus payload) will live in the boot rom chip. -## -if USE_FALLBACK_IMAGE -# The fallback image uses FALLBACK_SIZE bytes at the end of the ROM +include /config/nofailovercalculation128.lb
- default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) - -else -# The normal image goes at the beginning of the coreboot ROM region -# and uses all the remaining space - - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end - -## -## Compute where this copy of coreboot will start in the boot rom -## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can cached to speed up coreboot, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -default XIP_ROM_SIZE = 65536 -default XIP_ROM_BASE = ((( _ROMBASE + ROM_IMAGE_SIZE ) / XIP_ROM_SIZE ) * XIP_ROM_SIZE - XIP_ROM_SIZE ) - -## END BOILERPLATE -################################################################## - arch i386 end
## Index: LinuxBIOSv2-Configlb_refactor/src/mainboard/intel/truxton/Config.lb =================================================================== --- LinuxBIOSv2-Configlb_refactor/src/mainboard/intel/truxton/Config.lb (Revision 4150) +++ LinuxBIOSv2-Configlb_refactor/src/mainboard/intel/truxton/Config.lb (Arbeitskopie) @@ -17,40 +17,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ##
-## -## Compute the location and size of where this firmware image -## (coreboot plus bootloader) will live in the boot ROM chip -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end +include /config/nofailovercalculation128.lb
## -## Compute the start location and size size of the coreboot bootloader -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of coreboot will start in the boot ROM -## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can cached to speed up coreboot, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=131072 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -## ## Set all of the defaults for an x86 architecture ##
Index: LinuxBIOSv2-Configlb_refactor/src/mainboard/intel/mtarvon/Config.lb =================================================================== --- LinuxBIOSv2-Configlb_refactor/src/mainboard/intel/mtarvon/Config.lb (Revision 4150) +++ LinuxBIOSv2-Configlb_refactor/src/mainboard/intel/mtarvon/Config.lb (Arbeitskopie) @@ -17,40 +17,9 @@ ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA ##
-## -## Compute the location and size of where this firmware image -## (coreboot plus bootloader) will live in the boot ROM chip -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end +include /config/nofailovercalculation128.lb
## -## Compute the start location and size size of the coreboot bootloader -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of coreboot will start in the boot ROM -## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can cached to speed up coreboot, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=131072 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -## ## Set all of the defaults for an x86 architecture ##
Index: LinuxBIOSv2-Configlb_refactor/src/mainboard/intel/jarrell/Config.lb =================================================================== --- LinuxBIOSv2-Configlb_refactor/src/mainboard/intel/jarrell/Config.lb (Revision 4150) +++ LinuxBIOSv2-Configlb_refactor/src/mainboard/intel/jarrell/Config.lb (Arbeitskopie) @@ -3,41 +3,9 @@ ## default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-## -## Compute the location and size of where this firmware image -## (coreboot plus bootloader) will live in the boot rom chip. -## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) -else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) - default ROM_SECTION_OFFSET = 0 -end +include /config/nofailovercalculation128.lb
## -## Compute the start location and size size of -## The coreboot bootloader. -## -default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) -default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) - -## -## Compute where this copy of coreboot will start in the boot rom -## -default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) - -## -## Compute a range of ROM that can cached to speed up coreboot, -## execution speed. -## -## XIP_ROM_SIZE must be a power of 2. -## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE -## -default XIP_ROM_SIZE=131072 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) - -## ## Set all of the defaults for an x86 architecture ##
Index: LinuxBIOSv2-Configlb_refactor/src/config/nofailovercalculation128.lb =================================================================== --- LinuxBIOSv2-Configlb_refactor/src/config/nofailovercalculation128.lb (Revision 0) +++ LinuxBIOSv2-Configlb_refactor/src/config/nofailovercalculation128.lb (Revision 0) @@ -0,0 +1,38 @@ +## +## Compute the location and size of where this firmware image +## (coreboot plus bootloader) will live in the boot rom chip. +## +if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) +else + default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) + default ROM_SECTION_OFFSET = 0 +end + +## +## Compute the start location and size size of +## The coreboot bootloader. +## +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) + +## +## Compute where this copy of coreboot will start in the boot rom +## +default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE ) + +## +## Compute a range of ROM that can cached to speed up coreboot, +## execution speed. +## +## XIP_ROM_SIZE must be a power of 2. +## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE +## +default XIP_ROM_SIZE = 128 * 1024 +default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE ) + +## This is needed to work around a parser bug. +if USE_FALLBACK_IMAGE +end +