Re: [coreboot] i946GZ test

[Stefan Reinauer]

* Riko Ho  [161019 06:29]:
> Hello everyone..
>
> I've put W39F040FCPZ on the board...but I can not see any messages on
> serial...
> I can hear tuck tuck on motherboard buzzard....repeatedly
>
> command : sudo putty /dev/ttyUSB0 -serial -sercfg 115200,8,n,1,N on the host
>
> What should I do next to debug ?
>
> Cheers

Use a scope or a bus analyzer to figure out whether you are executing
code, and where you die. Check your SuperIO init code to see if you are
doing the right thing.

Stefan