Index: src/southbridge/amd/rs690/rs690_early_setup.c =================================================================== --- src/southbridge/amd/rs690/rs690_early_setup.c (revision 5266) +++ src/southbridge/amd/rs690/rs690_early_setup.c (working copy) @@ -128,7 +128,7 @@ /* * Compliant with CIM_33's ATINB_PrepareInit */ -static void get_cpu_rev() +static void get_cpu_rev(void) { u32 eax, ebx, ecx, edx; __asm__ volatile ("cpuid":"=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx) @@ -171,7 +171,7 @@ * Compliant with CIM_33's ATINB_HTInit * Init HT link speed/width for rs690 -- k8 link *****************************************/ -static void rs690_htinit() +static void rs690_htinit(void) { /* * About HT, it has been done in enumerate_ht_chain(). @@ -229,7 +229,7 @@ * Function2: DRAM and HT technology Trace mode configuration * Function3: Miscellaneous configuration *******************************************************/ -static void k8_optimization() +static void k8_optimization(void) { device_t k8_f0, k8_f2, k8_f3; msr_t msr; @@ -443,7 +443,7 @@ }
/* enable CFG access to Dev8, which is the SB P2P Bridge */ -static void enable_rs690_dev8() +static void enable_rs690_dev8(void) { set_nbmisc_enable_bits(PCI_DEV(0, 0, 0), 0x00, 1 << 6, 1 << 6); } @@ -453,14 +453,14 @@ /* * Compliant with CIM_33's AtiNBInitEarlyPost (AtiInitNBBeforePCIInit). */ -static void rs690_before_pci_init() +static void rs690_before_pci_init(void) { }
/* * The calling sequence is same as CIM. */ -static void rs690_early_setup() +static void rs690_early_setup(void) { device_t nb_dev = PCI_DEV(0, 0, 0); printk(BIOS_INFO, "rs690_early_setup()\n"); Index: src/southbridge/amd/sb600/sb600_smbus.h =================================================================== --- src/southbridge/amd/sb600/sb600_smbus.h (revision 5267) +++ src/southbridge/amd/sb600/sb600_smbus.h (working copy) @@ -58,5 +58,7 @@ #define axindxp_reg(reg, mask, val) \ alink_ax_indx(1, (reg), (mask), (val))
+int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address); +int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val);
#endif