On 06/07/2013 02:02 PM, Tim Zander wrote:
On 06/07/2013 12:22 PM, Peter Stuge wrote:
Tim Zander wrote:
I want to flash coreboot onto my x60s.
Note that the wiki page you refer to does *NOT* include any instructions for building coreboot itself. If you want SeaBIOS for BIOS compatibility and graphics during booting then you must make sure to build a coreboot.rom file which includes the correct VGA BIOS blob for your machine. After you've made a backup of your factory BIOS you can use bios_extract to take the backup apart, and one of the oprom files will be the correct VGA BIOS.
I'm aware of this. Without the VGA BIOS Blob I just would have no monitor output in boot, right?
Is the only way to find out the chip model of my x60s by disassembling and inspecting?
Likely SST25VF016B .
what I have to then to find the information necessary to do the first part of the flashing instruction of http://www.coreboot.org/Lenovo_x60x ? What do I need to change in the patch then?
Try this patch on top of current flashrom svn: http://dpaste.com/1216583/
I did this, patching and installing of flashrom went fine. But now I have the following:
tim@tim-ThinkPad-X60s:~/flash$ sudo flashrom -p internal -r factory.bin flashrom v0.9.6.1-r1675 on Linux 3.2.0-38-generic-pae (i686) flashrom is free software, get the source code at http://www.flashrom.org
Calibrating delay loop... delay loop is unreliable, trying to continue OK. Found chipset "Intel ICH7M". Enabling flash write... WARNING: SPI Configuration Lockdown activated.
I accidentally emailed this to Peter's email address. He responded that this is probably because I have another chip then the SST25VF016B. and told me to look at the output of flashrom -p internal -V:
flashrom v0.9.6.1-r1675 on Linux 3.2.0-38-generic-pae (i686) flashrom is free software, get the source code at http://www.flashrom.org
flashrom was built with libpci 3.1.8, GCC 4.6.3, little endian Command line (3 args): flashrom -p internal -V Calibrating delay loop... OS timer resolution is 1 usecs, 962M loops per second, delay more than 10% too short (got 88% of expected delay), recalculating... 967M loops per second, delay more than 10% too short (got 89% of expected delay), recalculating... 966M loops per second, delay more than 10% too short (got 88% of expected delay), recalculating... 960M loops per second, delay more than 10% too short (got 88% of expected delay), recalculating... 977M loops per second, delay loop is unreliable, trying to continue 10 myus = 10 us, 100 myus = 104 us, 1000 myus = 1029 us, 10000 myus = 9766 us, 4 myus = 5 us, OK. Initializing internal programmer No coreboot table found. DMI string system-manufacturer: "LENOVO" DMI string system-product-name: "1703Y66" DMI string system-version: "ThinkPad X60s" DMI string baseboard-manufacturer: "LENOVO" DMI string baseboard-product-name: "1703Y66" DMI string baseboard-version: "Not Available" DMI string chassis-type: "Notebook" Laptop detected via DMI. Whitelisted laptop detected. Found chipset "Intel ICH7M" with PCI ID 8086:27b9. Enabling flash write... 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x1 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x4 0xffc00000/0xff800000 FWH IDSEL: 0x4 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode disabled 0xff600000/0xff200000 FWH decode disabled 0xff500000/0xff100000 FWH decode disabled 0xff400000/0xff000000 FWH decode disabled Maximum FWH chip size: 0x100000 bytes BIOS_CNTL = 0x01: BIOS Lock Enable: disabled, BIOS Write Enable: enabled Root Complex Register Block address = 0xfed1c000 GCS = 0x200460: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x1 (SPI) Top Swap : not enabled SPIBAR = 0xfed1c000 + 0x3020 0x00: 0x8004 (SPIS) 0x02: 0x4040 (SPIC) 0x04: 0x00000000 (SPIA) 0x08: 0x00141414 (SPID0) 0x0c: 0x00000000 (SPID0+4) 0x10: 0x00000000 (SPID1) 0x14: 0x00000000 (SPID1+4) 0x18: 0x00000000 (SPID2) 0x1c: 0x00000000 (SPID2+4) 0x20: 0x00000000 (SPID3) 0x24: 0x00000000 (SPID3+4) 0x28: 0x00000000 (SPID4) 0x2c: 0x00000000 (SPID4+4) 0x30: 0x00000000 (SPID5) 0x34: 0x00000000 (SPID5+4) 0x38: 0x00000000 (SPID6) 0x3c: 0x00000000 (SPID6+4) 0x40: 0x00000000 (SPID7) 0x44: 0x00000000 (SPID7+4) 0x50: 0x00000000 (BBAR) 0x54: 0x0606 (PREOP) 0x56: 0x163b (OPTYPE) 0x58: 0x05d80302 (OPMENU) 0x5c: 0x0001d8ab (OPMENU+4) 0x60: 0x80fff1f0 (PBR0) 0x64: 0x00000000 (PBR1) 0x68: 0x00000000 (PBR2) WARNING: SPI Configuration Lockdown activated. Reading OPCODES... done SPI Read Configuration: prefetching disabled, caching enabled, OK. The following protocols are supported: SPI. Probing for AMIC A25L05PT, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L05PU, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L10PT, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L10PU, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L20PT, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L20PU, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L40PT, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L40PU, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L80P, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L16PT, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L16PU, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L512, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L010, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L020, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L040, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L080, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L016, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25L032, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for AMIC A25LQ032, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF021, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF041A, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF081, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF081A, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF161, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF321, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF321A, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DF641(A), 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25DQ161, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25F512, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512A, 64 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F512B, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25F1024(A), 128 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F2048, 256 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25F4096, 512 kB: Invalid OPCODE 0x15, will not execute. Probing for Atmel AT25FS010, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT25FS040, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT26DF041, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT26DF081A, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT26DF161, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT26DF161A, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT26F004, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45CS1282, 16896 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB011D, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB021D, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB041D, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB081D, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB161D, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB321C, 4224 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB321D, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel AT45DB642D, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for ESMT F25L008A, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B05, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B05T, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B10, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B10T, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B20, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B20T, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B40, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B40T, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B80, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B80T, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B16T, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B32, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B32T, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B64, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25B64T, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F05, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F10, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F20, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F40, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F80, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F32, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25F64, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25Q40, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25Q80(A), 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25Q16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25Q32(A/B), 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25Q64, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25Q128, 16384 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25QH16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon EN25QH32, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for GigaDevice GD25Q20, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for GigaDevice GD25Q40, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for GigaDevice GD25Q80(B), 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for GigaDevice GD25Q16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for GigaDevice GD25Q32(B), 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for GigaDevice GD25Q64(B), 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for GigaDevice GD25Q128B, 16384 kB: Invalid OPCODE 0x9f, will not execute. Probing for GigaDevice GD25LQ32, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Intel 25F160S33B8, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Intel 25F160S33T8, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Intel 25F320S33B8, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Intel 25F320S33T8, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Intel 25F640S33B8, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Intel 25F640S33T8, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L512(E)/MX25V512(C), 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L1005(C)/MX25L1006E, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L2005(C), 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L4005(A/C), 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L8005/MX25V8005, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L1605, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L1605A/MX25L1606E, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L1605D/MX25L1608D, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L1635D, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L1635E, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L3205(A), 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L3205D/MX25L3208D, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L3206E, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L3235D, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L6405(D), 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L6406E/MX25L6436E, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L6445E, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25L12805(D), 16384 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25U1635E, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25U3235E/F, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix MX25U6435E/F, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx M25PE10, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx M25PE20, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx M25PE40, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx M25PE80, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx M25PE16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx N25Q016, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx N25Q032..1E, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx N25Q032..3E, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx N25Q064..1E, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Numonyx N25Q064..3E, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LD256C, 32 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LD512(C), 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LD010(C), 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LD020(C), 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LD040(C), 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res3: id1 0x1414, id2 0x14 Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0x1414, id2 0x14 Probing for PMC Pm25LV010A, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LV020, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LV040, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LV080B, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC Pm25LV016B, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Sanyo LF25FW203A, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Spansion S25FL004A, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Spansion S25FL008A, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Spansion S25FL016A, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Spansion S25FL032A/P, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Spansion S25FL064A/P, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST SST25LF040A, 512 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for SST SST25VF010, 128 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF016B, 2048 kB: Invalid OPCODE 0x9f, will not execute. Invalid OPCODE 0x90, will not execute. probe_spi_res1: id 0x14 Probing for SST SST25VF032B, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST SST25VF064C, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST SST25VF040, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF040B, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST SST25VF040B.REMS, 512 kB: Invalid OPCODE 0x90, will not execute. Probing for SST SST25VF080B, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST SST25WF512, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST SST25WF010, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST SST25WF020, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST SST25WF040, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P05-A, 64 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P05, 64 kB: Invalid OPCODE 0x9f, will not execute. Invalid OPCODE 0x90, will not execute. probe_spi_res1: id 0x14 Probing for ST M25P10-A, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P10, 128 kB: Invalid OPCODE 0x9f, will not execute. Invalid OPCODE 0x90, will not execute. probe_spi_res1: id 0x14 Probing for ST M25P20, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P20-old, 256 kB: Invalid OPCODE 0x9f, will not execute. Invalid OPCODE 0x90, will not execute. probe_spi_res1: id 0x14 Probing for ST M25P40, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P40-old, 512 kB: Invalid OPCODE 0x9f, will not execute. Invalid OPCODE 0x90, will not execute. probe_spi_res1: id 0x14 Probing for ST M25P80, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P32, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P64, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25P128, 16384 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25PX16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25PX32, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST M25PX64, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25Q80, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25Q16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25Q32, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25Q64, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25Q128, 16384 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25X10, 128 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25X20, 256 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25X40, 512 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25X80, 1024 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25X16, 2048 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25X32, 4096 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond W25X64, 8192 kB: Invalid OPCODE 0x9f, will not execute. Probing for Unknown SFDP-capable chip, 0 kB: Invalid OPCODE 0x5a, will not execute. Receiving SFDP signature failed. Probing for AMIC unknown AMIC SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for Atmel unknown Atmel SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for Eon unknown Eon SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for Macronix unknown Macronix SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for PMC unknown PMC SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for SST unknown SST SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for ST unknown ST SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for Sanyo unknown Sanyo SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for Generic unknown SPI chip (RDID), 0 kB: Invalid OPCODE 0x9f, will not execute. Probing for Generic unknown SPI chip (REMS), 0 kB: Invalid OPCODE 0x90, will not execute. No EEPROM/flash device found. Note: flashrom can never write if the flash chip isn't found automatically. Restoring MMIO space at 0xb77c0070
Now we have somthing going on here:
Probing for PMC Pm25LV512(A), 64 kB: probe_spi_res3: id1 0x1414, id2 0x14 Probing for PMC Pm25LV010, 128 kB: probe_spi_res3: id1 0x1414, id2 0x14
Probing for SST c, 512 kB: probe_spi_res2: id1 0x14, id2 0x14 Probing for SST SST25LF080(A), 1024 kB: probe_spi_res2: id1 0x14, id2 0x14
Which one is now my chip?/I guess I have to replace / SST25VF016B by //SST25LF040A or SST25LF080(A) in the patch. Do I have to change anything else in the patch? Probably .total_size and other things, how do I find that out?
thanks
Tim