Hello, I would like to report that with ethtool under the original bios I am able to dump the 82562ET eeprom registers:
0010 957a d175 1a03 0000 0201 4701 0000 0000 0000 49b2 0000 8086 007f 0000 0000 8080 8080 7a7a 7a7a bd90 60b3 0000 7454 8bab 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 1039 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0128 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 4030 0000 0000 0000 c731
According to the datasheet:
http://download.intel.com/design/network/applnots/ap409.pdf
There are a few registers out of the norm. I am going to re-program them back to their defaults and try coreboot again?? One major difference I noticed is Linux is detecting the device id of 103Ah and the eeprom has a device id of 1039h (this value should be correct). Could the incorrect device id cause the PCI bridge scan not to detect the device?
Thanks - Joe