RE: (fwd) RE: building romimage for tyan s2850 mainboard [sagivy@ 3vium.com]

[YhLu]

Sagiv,

I just sent you tar ball of my source code before I added S2895 and S2735
support. Please check it out.

Regards

YH

-----Original Message-----
From: Stefan Reinauer [mailto:[e-mail]] 
Sent: Tuesday, September 14, 2004 7:29 AM
To: [e-mail]; Sagiv Yefet
Subject: (fwd) RE: building romimage for tyan s2850 mainboard
[[e-mail]]

1) Please Cc the mailing list, there are many people who might help you
   quicker/better than I do.
2) I don't understand your first question at all.
3) "invalid CMOS LB checksum" Means that the CMOS is not valid for
   LinuxBIOS. Probably because you had a different firmware running
   before LinuxBIOS in that machine. This error should go away
   automatically after rebooting.

Stefan

----- Forwarded message from Sagiv Yefet  -----

Date: Tue, 14 Sep 2004 16:41:46 +0200
From: "Sagiv Yefet" 
To: "Stefan Reinauer" 
Subject: RE: building romimage for tyan s2850 mainboard

I comment out the: 
#dir /drivers/ati/ragexl  -- video

which pci line in the southbridge it relate to?

southbridge amd/amd8111 "amd8111" link 0
    	    pci 0:0.0
                pci 0:1.0 on
                pci 0:1.1 on
                pci 0:1.2 on
                pci 0:1.3 on
                pci 0:1.5 off
                pci 0:1.6 off
                pci 1:0.0 on
                pci 1:0.1 on
                pci 1:0.2 off
                pci 1:1.0 off
end

what is this ERROR means ?

invalid CMOS LB checksum

Sagiv.

-----Original Message-----
From: Stefan Reinauer [mailto:[e-mail]] 
Sent: Tuesday, September 14, 2004 12:57 PM
To: Sagiv Yefet
Cc: [e-mail]
Subject: Re: building romimage for tyan s2850 mainboard

* Sagiv Yefet  [040914 12:43]:
> Thanks, it worked.
>
> There are 2 errors:
> ERROR - could not find PCI 1:03.0, using defaults

This looks like an error in the mptable creation, but I am not
sure without the context here.
> ERROR: PNP: 002e.b 70 not allocated        
> in Config.lb: 002e.b = HW monitor

No idea. I always kind of guessed when fiddling with PnP configuration.
> what does it means?

Can anyone on the list give some details here?

Stefan

----- End forwarded message -----
_______________________________________________
Linuxbios mailing list
[e-mail]
http://www.clustermatic.org/mailman/listinfo/linuxbios