I'm using FILO with nVidia reference board with a CK804. I've got LinuxBIOS to load FILO and FILO sees the IDE controller but not the drive. I thought FILO was device independent, but could the IDE controllers on the CK804 require FILO changes? Thanks.
Steve
----------------------- serial output ----------------------------------- Press <Enter> for default boot, or <Esc> for boot prompt... boot: hdc1:/boot/vmlinuz-2.6.9-1.667smp initrd=hdc1:/boot/initrd-2.6.9-1.667smp.img root=LABEL=/1 console=tty0 console=ttyS0,115200 desktop splash=silent showopts malloc_diag: alloc: 624 bytes (5 blocks), free: 15752 bytes (1 blocks) malloc_diag: alloc: 640 bytes (6 blocks), free: 15736 bytes (1 blocks) file_open: dev=hdc1, path=/boot/vmlinuz-2.6.9-1.667smp find_ide_controller: found PCI IDE controller 10de:0053 prog_if=0x8a find_ide_controller: secodary channel: compatibility mode find_ide_controller: cmd_base=0x170 ctrl_base=0x374 Detected floating bus No drive detected on IDE channel 1 devopen: failed to open ide malloc_diag: alloc: 624 bytes (5 blocks), free: 15752 bytes (1 blocks) malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) boot: hdc1:/boot/vmlinuz-2.6.9-1.667smp initrd=hdc1:/boot/initrd-2.6.9-1.667smp.img root=LABEL=/1 console=tty0 console=ttyS0,115200 desktop splash=silent showopts malloc_diag: alloc: 624 bytes (5 blocks), free: 15752 bytes (1 blocks) malloc_diag: alloc: 640 bytes (6 blocks), free: 15736 bytes (1 blocks) file_open: dev=hdc1, path=/boot/vmlinuz-2.6.9-1.667smp Drive 2 does not exist devopen: failed to open ide malloc_diag: alloc: 624 bytes (5 blocks), free: 15752 bytes (1 blocks) malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) boot: hdc1:/boot/vmlinuz-2.6.9-1.667smp initrd=hdc1:/boot/initrd-2.6.9-1.667smp.img root=LABEL=/1 console=tty0 console=ttyS0,115200 desktop splash=silent showopts