I use the fallback and the normal mode, if my chip has a size
256*1024,
what size of FALLBACK_SIZE and ROM_IMAGE_SIZE I can choose, I have some difficulty to define the role of the ROM_IMAGE_SIZE, the ROM_SIZE define the size of the chip, the FALLBACK_SIZE define the size of the fallback mode, but the ROM_IMAGE_SIZE ??? I don't understand the goal of ROM_IMAGE_SIZE, if you have an better explaination that on the Web site, I would appreciate much.
Just to make sure first, after changing anything in the config'lb or options.lb files, you have to re-run ./buildtarget to recreate the make files with the new values.
[...]
-Corey
Thank's for all of your explaination, now have a better vision of the things, thanks again ;)
regards
Ccases
The compilation and the size of linuxbios.rom is ok now.
Some others questions :
For initialise the serial port for debugging, what is the command and or to place it ?
If I have just create the file linuxbios.rom with etherboot for payload, and if I test to flash my rom, normaly even if all doesn't function, at least will have something on the screen or not ? if not I depend on my VGA ?
Thank's by advance for your help.
Regards
Ccases