I will check if it is protected by a jumper tomorrow (if that is what you are saying...). Strange in that case, since it worked using awdflash. Thanks for any help!
Karl Erik
Stefan Reinauer wrote:
- Peter Stuge stuge-linuxbios@cdy.org [070319 23:32]:
On Mon, Mar 19, 2007 at 10:50:02PM +0100, Karl Erik Asbjørnsen wrote:
Verifying flash address: 0x00000000 - FAILED
Flashing the original bios to the bios savior did not work, so I used awdflash instead. That worked fine.
awdflash could flash the BIOS savior but not flashrom? Hmm.
fails at addr 0x00000000 tells me there is some GPIO line protecting the bios.