Oh, I almost forgot...
On Fri, Oct 05, 2007 at 01:28:42PM -0700, yhlu wrote:
CPU ==>yes RAM ===> yes IDE ===> yes IDE using CF-to-IDE adapter ===> not tested SATA ==> yes USB ==> yes On-board ethernet ===> yes On-board audio ====> N/A PCI add-on cards ===> N/A PCI Express add-on cards ===> display card Floppy ===> why? not tested
Sure, the typical server admin probably doesn't care about this type of stuff, but I think in general we want to fully support _all_ the hardware which is available on the board.
Thus, I think we should have a common Status table in the wiki for _all_ boards and we should explicitly test all available hardware parts in LinuxBIOS so we have an exact status report as possible for each board.
Our users will surely appreciate it.
Serial port (COM1) Yes Serial port (COM2) ? Parallel port ===> why? not tested PS/2 keyboard ===> why? not tested PS/2 mouse ===> why? not tested Mainboard sensors/fans ===> N/A
The spec page says
- Winbond W83627HF Super IO - Analog Devices ADT7476 Hardware Monitoring IC
Don't those two provide sensors of various kinds? Did you test any of them (via lm-sensors probably)?
Uwe.