Author: stepan Date: 2007-08-27 09:28:28 +0200 (Mon, 27 Aug 2007) New Revision: 2749
Modified: trunk/LinuxBIOSv2/util/probe_superio/probe_superio.c Log: This patch rewrites probe_superio almost completely. Common code sequences have been factored out, the code has been made more generic, has better handling of corner cases and is actually much shorter.
It also adds probing for almost all recent (since 1999) ITE Super I/O chips to probe_superio. I did verify against all ITE datasheets (including those not available any more) that the probing was non-destructive.
For the ITE IT8712F, the complete configuration is dumped and as comparison the default value from the data sheet is printed. More information can be extracted easily, however this needs loads of datasheet surfing.
This code has been tested extensively, dumping for other ITE chips will follow as a separate patch.
Signed-off-by: Carl-Daniel Hailfinger c-d.hailfinger.devel.2006@gmx.net Acked-by: Stefan Reinauer stepan@coresystems.de
Modified: trunk/LinuxBIOSv2/util/probe_superio/probe_superio.c =================================================================== --- trunk/LinuxBIOSv2/util/probe_superio/probe_superio.c 2007-08-23 16:08:21 UTC (rev 2748) +++ trunk/LinuxBIOSv2/util/probe_superio/probe_superio.c 2007-08-27 07:28:28 UTC (rev 2749) @@ -3,6 +3,7 @@ * * Copyright (C) 2006 Ronald Minnich rminnich@gmail.com * Copyright (C) 2006 coresystems GmbH info@coresystems.de + * Copyright (C) 2007 Carl-Daniel Hailfinger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -32,11 +33,16 @@ * if we need this. */
-unsigned char regval(unsigned short port, unsigned short reg) { +unsigned char regval(unsigned short port, unsigned char reg) { outb(reg, port); return inb(port+1); }
+void regwrite(unsigned short port, unsigned char reg, unsigned char val) { + outb(reg, port); + outb(val, port+1); +} + void dump_ns8374(unsigned short port) { printf("Enables: 21=%02x, 22=%02x, 23=%02x, 24=%02x, 26=%02x\n", @@ -46,15 +52,13 @@ /* check COM1. This is all we care about at present. */ printf("COM 1 is Globally %s\n", regval(port,0x26)&8 ? "disabled" : "enabled"); /* select com1 */ - outb(0x7, port); - outb(3, port+1); + regwrite(port, 0x07, 0x03); printf("COM 1 is locally %s\n", regval(port, 0x30) & 1 ? "enabled" : "disabled"); printf("COM1 60=%02x, 61=%02x, 70=%02x, 71=%02x, 74=%02x, 75=%02x, f0=%02x\n", regval(port, 0x60), regval(port, 0x61), regval(port, 0x70), regval(port, 0x71), regval(port, 0x74), regval(port, 0x75), regval(port, 0xf0)); /* select gpio */ - outb(0x7, port); - outb(7, port+1); + regwrite(port, 0x07, 0x07); printf("GPIO is %s\n", regval(port, 0x30) & 1 ? "enabled" : "disabled"); printf("GPIO 60=%02x, 61=%02x, 70=%02x, 71=%02x, 74=%02x, 75=%02x, f0=%02x\n", regval(port, 0x60), regval(port, 0x61), regval(port, 0x70), regval(port, 0x71), @@ -85,38 +89,33 @@ printf("2b=%02x\n", regval(port, 0x2b));
/* select UART 1 */ - outb(0x07, port); - outb(0x01, port+1); + regwrite(port, 0x07, 0x01); printf("UART1 is %s\n", regval(port, 0x30) & 1 ? "enabled" : "disabled"); printf("UART1 base=%02x%02x, irq=%02x, mode=%s\n", regval(port, 0x60), regval(port, 0x61), regval(port, 0x70)&0x0f, regval(port, 0xf0)&0x10 ? "RS485":"RS232");
/* select UART 2 */ - outb(0x07, port); - outb(0x02, port+1); + regwrite(port, 0x07, 0x02); printf("UART2 is %s\n", regval(port, 0x30) & 1 ? "enabled" : "disabled"); printf("UART2 base=%02x%02x, irq=%02x, mode=%s\n", regval(port, 0x60), regval(port, 0x61), regval(port, 0x70)&0x0f, regval(port, 0xf0)&0x10 ? "RS485":"RS232");
/* select Parport */ - outb(0x07, port); - outb(0x03, port+1); + regwrite(port, 0x07, 0x03); printf("PARPORT is %s\n", regval(port, 0x30) & 1 ? "enabled" : "disabled"); printf("PARPORT base=%02x%02x, irq=%02x\n", regval(port, 0x60), regval(port, 0x61), regval(port, 0x70)&0x0f);
/* select hw monitor */ - outb(0x07, port); - outb(0x04, port+1); + regwrite(port, 0x07, 0x04); printf("HW monitor is %s\n", regval(port, 0x30) & 1 ? "enabled" : "disabled"); printf("HW monitor base=%02x%02x, irq=%02x\n", regval(port, 0x60), regval(port, 0x61), regval(port, 0x70)&0x0f);
/* select gpio */ - outb(0x07, port); - outb(0x06, port+1); + regwrite(port, 0x07, 0x05); printf("GPIO is %s\n", regval(port, 0x30) & 1 ? "enabled" : "disabled"); printf("GPIO 70=%02x, e0=%02x, e1=%02x, e2=%02x, e3=%02x, e4=%02x, e5=%02x\n", regval(port, 0x70), regval(port, 0xe0), regval(port, 0xe1), regval(port, 0xe2), @@ -130,8 +129,152 @@
}
+//End Of Table +#define EOT -1 +//NO LDN needed +#define NOLDN -2 +//Not Available +#define NANA -3 +//Biggest LDN +#define MAXLDN 0xa +//MAXimum NUMber of Indexes +#define MAXNUMIDX 70 +const static struct ite_registers { + signed short superio_id; //yes, it should be unsigned, but then EOT has to be positive + struct ite_ldnidx { + signed short ldn; + signed short idx[MAXNUMIDX+1]; + signed short def[MAXNUMIDX+1]; + } ldn[MAXLDN+3]; //biggestLDN+0+NOLDN+EOT +} ite_reg_table[] = { + {0x8712,{ + {NOLDN, + {0x07,0x20,0x21,0x22,0x23,0x24,0x2b,EOT}, + {NANA,0x87,0x12,0x08,0x00,0x00,0x00,EOT}}, + {0x0, + {0x30,0x60,0x61,0x70,0x74,0xf0,0xf1,EOT}, + {0x00,0x03,0xf0,0x06,0x02,0x00,0x00,EOT}}, + {0x1, + {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,0xf3,EOT}, + {0x00,0x03,0xf8,0x04,0x00,0x50,0x00,0x7f,EOT}}, + {0x2, + {0x30,0x60,0x61,0x70,0xf0,0xf1,0xf2,0xf3,EOT}, + {0x00,0x02,0xf8,0x03,0x00,0x50,0x00,0x7f,EOT}}, + {0x3, + {0x30,0x60,0x61,0x62,0x63,0x70,0x74,0xf0,EOT}, + {0x00,0x03,0x78,0x07,0x78,0x07,0x03,0x03,EOT}}, + {0x4, + {0x30,0x60,0x61,0x62,0x63,0x70,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,EOT}, + {0x00,0x02,0x90,0x02,0x30,0x09,0x00,0x00,0x00,0x00,0x00,NANA,NANA,EOT}}, + {0x5, + {0x30,0x60,0x61,0x62,0x63,0x70,0x71,0xf0,EOT}, + {0x01,0x00,0x60,0x00,0x64,0x01,0x02,0x00,EOT}}, + {0x6, + {0x30,0x70,0x71,0xf0,EOT}, + {0x00,0x0c,0x02,0x00,EOT}}, + {0x7, + {0x25,0x26,0x27,0x28,0x29,0x2a,0x2c,0x60,0x61,0x62,0x63,0x64,0x65,0x70,0x71,0x72,0x73,0x74,0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xc0,0xc1,0xc2,0xc3,0xc4,0xc8,0xc9,0xca,0xcb,0xcc,0xe0,0xe1,0xe2,0xe3,0xe4,0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7,0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,EOT}, + {0x01,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x40,0x00,0x01,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,NANA,0x00,EOT}}, + {0x8, + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x00,0x03,0x00,0x0a,0x00,EOT}}, + {0x9, + {0x30,0x60,0x61,EOT}, + {0x00,0x02,0x01,EOT}}, + {0xa, + {0x30,0x60,0x61,0x70,0xf0,EOT}, + {0x00,0x03,0x10,0x0b,0x00,EOT}}, + {EOT}}}, + {EOT} +};
void +dump_ite(unsigned short port, unsigned short id) +{ + int i, j, k; + signed short *idx; + printf ("ITE "); + + + /* ID Mapping Table + unknown -> IT8711 (no datasheet) + unknown -> IT8722 (no datasheet) + 0x8702 -> IT8702 + 0x8705 -> IT8700 or IT8705 + 0x8708 -> IT8708 + 0x8710 -> IT8710 + 0x8712 -> IT8712 + 0x8716 -> IT8716 or IT8726 (identical except CPU voltage control) + 0x8718 -> IT8718 + 0x8726 does not exist according to datasheet, but experience differs + */ + switch(id) { + case 0x8702: + printf ("IT8702\n"); + break; + case 0x8705: + printf ("IT8700 or IT8705\n"); + break; + case 0x8710: + printf ("IT8710\n"); + break; + case 0x8712: + printf ("IT8712\n"); + for (i=0;; i++) { + if (ite_reg_table[i].superio_id == EOT) + break; + if ((unsigned short)ite_reg_table[i].superio_id != id) + continue; + for (j=0;; j++) { + if (ite_reg_table[i].ldn[j].ldn == EOT) + break; + if (ite_reg_table[i].ldn[j].ldn != NOLDN) { + printf("switching to LDN 0x%01x\n", ite_reg_table[i].ldn[j].ldn); + regwrite(port, 0x07, ite_reg_table[i].ldn[j].ldn); + } + idx = ite_reg_table[i].ldn[j].idx; + printf("idx "); + for (k=0;; k++) { + if (idx[k] == EOT) + break; + printf("%02x ", idx[k]); + } + printf("\nval "); + for (k=0;; k++) { + if (idx[k] == EOT) + break; + printf("%02x ", regval(port, idx[k])); + } + printf("\ndef "); + idx = ite_reg_table[i].ldn[j].def; + for (k=0;; k++) { + if (idx[k] == EOT) + break; + if (idx[k] == NANA) + printf("NA "); + else + printf("%02x ", idx[k]); + } + printf("\n"); + } + + } + break; + case 0x8716: + printf ("IT8716 or IT8726\n"); + break; + case 0x8718: + printf ("IT8718\n"); + break; + default: + printf ("unknown ITE chip, id=%04x\n", id); + for (i=0x20; i<=0x24; i++) + printf("index %02x=%02x\n", i, regval(port, i)); + break; + } +} + +void probe_idregs_simple(unsigned short port){ unsigned char id; outb(0x20, port); @@ -167,9 +310,10 @@
void probe_idregs_fintek(unsigned short port){ - unsigned int vid, did; + unsigned int vid, did, success = 0;
// Enable configuration sequence (Fintek uses this for example) + // Older ITE chips have the same enable sequence outb(0x87, port); outb(0x87, port);
@@ -185,13 +329,10 @@ } did = inb(port+1);
- outb(0x21, port); - did = did|(inb(port+1)<<8); + did = did|(regval(port, 0x21)<<8);
- outb(0x23, port); - vid = inb(port+1); - outb(0x24, port); - vid = vid|(inb(port+1)<<8); + vid = regval(port, 0x23); + vid = vid|(regval(port, 0x24)<<8);
printf("SuperIO found at 0x%02x: vid=0x%04x/did=0x%04x\n", port, vid, did);
@@ -199,23 +340,104 @@ return;
// printf("%s\n", familyid[id]); + switch(did) { + case 0x0887: // reversed for ITE8708 + case 0x1087: // reversed for ITE8710 + success = 1; + dump_ite(port, ((did & 0xff) << 8) | ((did & 0xff00) >> 8)); + // disable configuration + regwrite(port, 0x02, 0x02); + break; + default: + break; + } switch(vid) { case 0x3419: + success = 1; dump_fintek(port, did); break; default: - printf("no dump for 0x%04x/0x%04x\n", vid, did); break; } + if (!success) + printf("no dump for vid 0x%04x, did 0x%04x\n", vid, did);
- // disable configuration + // disable configuration (for Fintek, doesn't hurt ITE) outb(0xaa, port); }
void +probe_idregs_ite(unsigned short port){ + unsigned int id, chipver; + + // Enable configuration sequence (ITE uses this for newer IT87[012]x) + // IT871[01] uses 0x87, 0x87 -> fintek detection should handle it + // IT8761 uses 0x87, 0x61, 0x55, 0x55/0xaa + // IT86xx series uses different ports + // IT8661 uses 0x86, 0x61, 0x55/0xaa, 0x55/0xaa and 32 more writes + // IT8673 uses 0x86, 0x80, 0x55/0xaa, 0x55/0xaa and 32 more writes + outb(0x87, port); + outb(0x01, port); + outb(0x55, port); + if (port == 0x2e) + outb(0x55, port); + else + outb(0xAA, port); + + // Read Chip ID Byte 1 + id = regval(port, 0x20); + if (id != 0x87) { + if (inb(port) == 0xff ) + printf ("No SuperIO chip found at 0x%04x\n", port); + else + printf("probing 0x%04x, failed (0x%02x), data returns 0x%02x\n", + port, inb(port), inb(port+1)); + return; + } + + id <<= 8; + + // Read Chip ID Byte 2 + id |= regval(port, 0x21); + + // Read Chip Version, only bit 3..0 for all IT87xx + chipver = regval(port, 0x22) & 0x0f; + + /* ID Mapping Table + unknown -> IT8711 (no datasheet) + unknown -> IT8722 (no datasheet) + 0x8702 -> IT8702 + 0x8705 -> IT8700 or IT8705 + 0x8710 -> IT8710 + 0x8712 -> IT8712 + 0x8716 -> IT8716 or IT8726 (identical except CPU voltage control) + 0x8718 -> IT8718 + */ + printf("ITE? SuperIO found at 0x%02x: id=0x%04x, chipver=0x%01x\n", + port, id, chipver); + + switch(id) { + case 0x8702: + case 0x8705: + case 0x8710: //pointless, IT8710 has different enable sequence + case 0x8712: + case 0x8716: + case 0x8718: + dump_ite(port, id); + break; + default: + printf("no dump for id 0x%04x\n", id); + break; + } + // disable configuration + regwrite(port, 0x02, 0x02); +} + +void probe_superio(unsigned short port) { probe_idregs_simple(port); probe_idregs_fintek(port); + probe_idregs_ite(port); }
int