Eric and Ron,
I can get into the Etherboot now. But I meet problem again:
Etherboot 5.0.10 (Last Product version) only support Intel 82544. Tyan s2725 uses Intel 82646EB. (DeviceID is ox1010). So It said" No Adapter found".
Etherboot 5.1.8 seems support 82546, But I found 1. can not make EBI, have to use ELF. It is around 30KB. 2. If disable RELOCATION : got error: NO HEAP FOUND. 3. If enable RELOCATION: got error: It can not calculate the file size, and keep print " 61:rom_read_bytes() - skipping block 16"
My Question is: 1. When do you plan to support 82546? In 5.0.11 or 5.2.0. 2. Is there any easy way to modify 5.0.10 to make it work with Intel 82546?
Thanks and regards
Yinghai Lu
222222222222222222222222222222222222222222222222222 Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.2
37:init_bytes() - zkernel_start:0xffff0000 zkernel_mask:0x0000ffff Found ELF candiate at offset 0 Dropping non PT_LOAD segment New segment addr 0x20000 size 0x10e80c3 offset 0xb0 filesize 0x755c (cleaned up) New segment addr 0x20000 size 0x10e80c3 offset 0xb0 filesize 0x755c
Loading Segment: addr: 0x000000003ffca7e8 memsz: 0x000000000000ec0c filesz: 0x00 0000000000755c Clearing Segment: addr: 0x000000003ffd1d44 memsz: 0x00000000000076b0 Loading Segment: addr: 0x000000000002ec0c memsz: 0x00000000010d94b7 filesz: 0x00 00000000000000 Clearing Segment: addr: 0x000000000002ec0c memsz: 0x00000000010d94b7 Jumping to boot code at 0x20000 ROM segment 0x0000 length 0xfbf8 reloc 0x00020000 CPU 1343 Mhz Etherboot 5.1.8 (GPL) Tagged ELF (Multiboot) for [E1000] init_heap: No heap found.
22222222222222222222222222222222222222222222222222222222222222222
33333333333333333333333333333333333333333333333333333333333333333333333333 Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.2
37:init_bytes() - zkernel_start:0xffff0000 zkernel_mask:0x0000ffff Found ELF candiate at offset 0 Dropping non PT_LOAD segment New segment addr 0x20000 size 0x1106000 offset 0xb0 filesize 0x76bcc3 (cleaned up) New segment addr 0x20000 size 0x1106000 offset 0xb0 filesize 0x76bc c3 Loading Segment: addr: 0x000000003ffca7e8 memsz: 0x000000000000ec0c filesz: 0x00 0000000000ec0c Loading Segment: addr: 0x000000000002ec0c memsz: 0x00000000010f73f4 filesz: 0x00 0000000075d0b7 61:rom_read_bytes() - skipping block 16 61:rom_read_bytes() - skipping block 16 61:rom_read_bytes() - skipping block 16 61:rom_read_bytes() - skipping block 16 61:rom_read_bytes() - skipping block 16 61:rom_read_bytes() - skipping block 16 61:rom_read_bytes() - skipping block 16 3333333333333333333333333333333333333333333333333333333333333333333333333333 3
-----�ʼ�ԭ��----- ������: YhLu ����ʱ��: 2003��6��13�� 0:27 �ռ���: ron minnich; ebiederman@lnxi.com ����: linuxbios@clustermatic.org ����: ��: High-End Desktop Support
Eric,
I am working on porting linuxbios to Tyan s2725. The southbridge is ICH5.
I have copied 82801ca to 82801er. And update pci_ids.h to add some ICH5 device id.
I compare the Intel whitepaper, only need to comment out several line in ich5_ioapi.c. because ICH5 has no operation to index 3 reg.
I didn't initialize USB and Serial ATA.
I used e1000.ebi from Etherboot 5.0.8.
I only got the following result. The ebi size is 18164, so I set ROM_IMAGE_SIZE to 46*1024.
I wonder why the size if not right: 0x4564 = 17764. But the EBI is 18164.
Regards
Yinghai Lu
Console output:
Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.2
37:init_bytes() - zkernel_start:0xffff0000 zkernel_mask:0x0000ffff Found ELF candiate at offset 0 New segment addr 0x94000 size 0x7168 offset 0x60 filesize 0x4564 (cleaned up) New segment addr 0x94000 size 0x7168 offset 0x60 filesize 0x4564 Loading Segment: addr: 0x0000000000094000 memsz: 0x0000000000007168 filesz: 0x00 00000000004564 Clearing Segment: addr: 0x0000000000098564 memsz: 0x0000000000002c04 Jumping to boot code at 0x������������������������������������������������������ ����������������������������������������������������������������������������
-----�ʼ�ԭ��----- ������: YhLu ����ʱ��: 2003��6��12�� 17:12 �ռ���: ron minnich; Peter Fedorow ����: linuxbios@clustermatic.org ����: ��: High-End Desktop Support
Ron,
Any plan to make it support ICH5. It has USB 2.0 support and Serial ATA support.
Yinghai Lu
-----�ʼ�ԭ��----- ������: ron minnich [mailto:rminnich@lanl.gov] ����ʱ��: 2003��6��12�� 8:37 �ռ���: Peter Fedorow ����: linuxbios@clustermatic.org ����: Re: High-End Desktop Support
On Thu, 12 Jun 2003, Peter Fedorow wrote:
I'm looking for a fully supported motherboard that can accept at least a 2 GHz Pentium 4 or AMD Athlon.
intel e7500, 7501, etc. are supported.
ron
_______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios