Author: rminnich Date: 2007-10-12 23:22:40 +0200 (Fri, 12 Oct 2007) New Revision: 2850
Modified: trunk/util/flashrom/board_enable.c trunk/util/flashrom/jedec.c Log:
Changes to flashrom to support the K8N-NEO3, first tested at Google on GSOC day :-)
Also minor changes to remove tab-space combinations where possible.
Signed-off-by: Ronald G. Minnich rminnich@gmail.com Signed-off-by: David Hendricks david.hendricks@gmail.com Acked-by: Stefan Reinauer stepan@coresystems.de
Index: jedec.c =================================================================== --- jedec.c (revision 2847) +++ jedec.c (working copy) @@ -281,7 +281,7 @@ // dumb check if erase was successful. for (i = 0; i < total_size; i++) { if (bios[i] != (uint8_t) 0xff) { - printf("ERASE FAILED\n"); + printf("ERASE FAILED @%d, val %02x\n", i, bios[i]); return -1; } } Index: board_enable.c =================================================================== --- board_enable.c (revision 2847) +++ board_enable.c (working copy) @@ -153,7 +153,8 @@ return 1; } /* Start IO, 33MHz, readcnt input bytes, writecnt output bytes. Note: - We can't use writecnt directly, but have to use a strange encoding */ + * We can't use writecnt directly, but have to use a strange encoding + */ outb((0x5 << 4) | ((readcnt & 0x3) << 2) | (writeenc), port); do { busy = inb(port) & 0x80; @@ -202,43 +203,39 @@ /* * Helper functions for many Winbond Super I/Os of the W836xx range. */ -#define W836_INDEX 0x2E -#define W836_DATA 0x2F - /* Enter extended functions */ -static void w836xx_ext_enter(void) +static void w836xx_ext_enter(uint16_t port) { - outb(0x87, W836_INDEX); - outb(0x87, W836_INDEX); + outb(0x87, port); + outb(0x87, port); }
/* Leave extended functions */ -static void w836xx_ext_leave(void) +static void w836xx_ext_leave(uint16_t port) { - outb(0xAA, W836_INDEX); + outb(0xAA, port); }
/* General functions for reading/writing Winbond Super I/Os. */ -static unsigned char wbsio_read(unsigned char index) +static unsigned char wbsio_read(uint16_t index, uint8_t reg) { - outb(index, W836_INDEX); - return inb(W836_DATA); + outb(reg, index); + return inb(index+1); }
-static void wbsio_write(unsigned char index, unsigned char data) +static void wbsio_write(uint16_t index, uint8_t reg, uint8_t data) { - outb(index, W836_INDEX); - outb(data, W836_DATA); + outb(reg, index); + outb(data, index+1); }
-static void wbsio_mask(unsigned char index, unsigned char data, - unsigned char mask) +static void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask) { - unsigned char tmp; + uint8_t tmp;
- outb(index, W836_INDEX); - tmp = inb(W836_DATA) & ~mask; - outb(tmp | (data & mask), W836_DATA); + outb(reg, index); + tmp = inb(index+1) & ~mask; + outb(tmp | (data & mask), index+1); }
/** @@ -248,37 +245,80 @@ * - Agami Aruma * - IWILL DK8-HTX */ -static int w83627hf_gpio24_raise(const char *name) +static int w83627hf_gpio24_raise(uint16_t index, const char *name) { - w836xx_ext_enter(); + w836xx_ext_enter(index);
/* Is this the w83627hf? */ - if (wbsio_read(0x20) != 0x52) { /* SIO device ID register */ + if (wbsio_read(index, 0x20) != 0x52) { /* Super I/O device ID register */ fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n", - name, wbsio_read(0x20)); - w836xx_ext_leave(); + name, wbsio_read(index, 0x20)); + w836xx_ext_leave(index); return -1; }
/* PIN89S: WDTO/GP24 multiplex -> GPIO24 */ - wbsio_mask(0x2B, 0x10, 0x10); + wbsio_mask(index, 0x2B, 0x10, 0x10);
- wbsio_write(0x07, 0x08); /* Select logical device 8: GPIO port 2 */ + wbsio_write(index, 0x07, 0x08); /* Select logical device 8: GPIO port 2 */
- wbsio_mask(0x30, 0x01, 0x01); /* Activate logical device. */ + wbsio_mask(index, 0x30, 0x01, 0x01); /* Activate logical device. */
- wbsio_mask(0xF0, 0x00, 0x10); /* GPIO24 -> output */ + wbsio_mask(index, 0xF0, 0x00, 0x10); /* GPIO24 -> output */
- wbsio_mask(0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */ + wbsio_mask(index, 0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */
- wbsio_mask(0xF1, 0x10, 0x10); /* Raise GPIO24 */ + wbsio_mask(index, 0xF1, 0x10, 0x10); /* Raise GPIO24 */
- w836xx_ext_leave(); + w836xx_ext_leave(index);
return 0; }
+static int w83627hf_gpio24_raise_2e(const char *name) +{ + return w83627hf_gpio24_raise(0x2d, name); +} + /** + * Winbond W83627THF: GPIO 4, bit 4 + * + * Suited for: + * - MSI K8N-NEO3 + */ +static int w83627thf_gpio4_4_raise(uint16_t index, const char *name) +{ + w836xx_ext_enter(index); + /* Is this the w83627thf? */ + if (wbsio_read(index, 0x20) != 0x82) { /* Super I/O device ID register */ + fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n", + name, wbsio_read(index, 0x20)); + w836xx_ext_leave(index); + return -1; + } + + /* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */ + + wbsio_write(index, 0x07, 0x09); /* Select logical device 9: GPIO port 4 */ + + wbsio_mask(index, 0x30, 0x02, 0x02); /* Activate logical device. */ + + wbsio_mask(index, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */ + + wbsio_mask(index, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */ + + wbsio_mask(index, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */ + + w836xx_ext_leave(index); + + return 0; +} + +static int w83627thf_gpio4_4_raise_4e(const char *name) +{ + return w83627thf_gpio4_4_raise(0x4E, name); +} +/** * Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs. * * We don't need to do this when using LinuxBIOS, GPIO15 is never lowered there. @@ -335,12 +375,12 @@ pci_write_byte(dev, 0x59, val);
/* Raise ROM MEMW# line on Winbond w83697 SuperIO */ - w836xx_ext_enter(); + w836xx_ext_enter(0x2E);
- if (!(wbsio_read(0x24) & 0x02)) /* flash rom enabled? */ - wbsio_mask(0x24, 0x08, 0x08); /* enable MEMW# */ + if (!(wbsio_read(0x2E, 0x24) & 0x02)) /* flash rom enabled? */ + wbsio_mask(0x2E, 0x24, 0x08, 0x08); /* enable MEMW# */
- w836xx_ext_leave(); + w836xx_ext_leave(0x2E);
return 0; } @@ -487,9 +527,11 @@ {0x10de, 0x0360, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, "gigabyte", "m57sli", "GIGABYTE GA-M57SLI", it87xx_probe_serial_flash}, {0x1022, 0x7468, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise}, + "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise_2e}, + {0x10de, 0x005e, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + "msi", "k8n-neo3", "MSI K8N Neo3", w83627thf_gpio4_4_raise_4e}, {0x1022, 0x746B, 0x1022, 0x36C0, 0x0000, 0x0000, 0x0000, 0x0000, - "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise}, + "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise_2e}, {0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, "VIA EPIA M/MII/...", board_via_epia_m}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, @@ -509,8 +551,8 @@ * Match boards on LinuxBIOS table gathered vendor and part name. * Require main PCI IDs to match too as extra safety. */ -static struct board_pciid_enable *board_match_linuxbios_name(char *vendor, - char *part) +static struct board_pciid_enable *board_match_linuxbios_name(char *vendor, + char *part) { struct board_pciid_enable *board = board_pciid_enables;
@@ -525,10 +567,11 @@ continue;
if (board->second_vendor && - !pci_dev_find(board->second_vendor, board->second_device)) + !pci_dev_find(board->second_vendor, board->second_device)) continue; return board; } + printf("NOT FOUND %s:%s\n", vendor, part); return NULL; }
@@ -545,20 +588,20 @@ continue;
if (!pci_card_find(board->first_vendor, board->first_device, - board->first_card_vendor, - board->first_card_device)) + board->first_card_vendor, + board->first_card_device)) continue;
if (board->second_vendor) { if (board->second_card_vendor) { if (!pci_card_find(board->second_vendor, - board->second_device, - board->second_card_vendor, - board->second_card_device)) + board->second_device, + board->second_card_vendor, + board->second_card_device)) continue; } else { if (!pci_dev_find(board->second_vendor, - board->second_device)) + board->second_device)) continue; } } @@ -582,7 +625,7 @@
if (board) { printf("Found board "%s": Enabling flash write... ", - board->name); + board->name);
ret = board->enable(board->name); if (ret)
Modified: trunk/util/flashrom/board_enable.c =================================================================== --- trunk/util/flashrom/board_enable.c 2007-10-11 18:30:05 UTC (rev 2849) +++ trunk/util/flashrom/board_enable.c 2007-10-12 21:22:40 UTC (rev 2850) @@ -153,7 +153,8 @@ return 1; } /* Start IO, 33MHz, readcnt input bytes, writecnt output bytes. Note: - We can't use writecnt directly, but have to use a strange encoding */ + * We can't use writecnt directly, but have to use a strange encoding + */ outb((0x5 << 4) | ((readcnt & 0x3) << 2) | (writeenc), port); do { busy = inb(port) & 0x80; @@ -202,43 +203,39 @@ /* * Helper functions for many Winbond Super I/Os of the W836xx range. */ -#define W836_INDEX 0x2E -#define W836_DATA 0x2F - /* Enter extended functions */ -static void w836xx_ext_enter(void) +static void w836xx_ext_enter(uint16_t port) { - outb(0x87, W836_INDEX); - outb(0x87, W836_INDEX); + outb(0x87, port); + outb(0x87, port); }
/* Leave extended functions */ -static void w836xx_ext_leave(void) +static void w836xx_ext_leave(uint16_t port) { - outb(0xAA, W836_INDEX); + outb(0xAA, port); }
/* General functions for reading/writing Winbond Super I/Os. */ -static unsigned char wbsio_read(unsigned char index) +static unsigned char wbsio_read(uint16_t index, uint8_t reg) { - outb(index, W836_INDEX); - return inb(W836_DATA); + outb(reg, index); + return inb(index+1); }
-static void wbsio_write(unsigned char index, unsigned char data) +static void wbsio_write(uint16_t index, uint8_t reg, uint8_t data) { - outb(index, W836_INDEX); - outb(data, W836_DATA); + outb(reg, index); + outb(data, index+1); }
-static void wbsio_mask(unsigned char index, unsigned char data, - unsigned char mask) +static void wbsio_mask(uint16_t index, uint8_t reg, uint8_t data, uint8_t mask) { - unsigned char tmp; + uint8_t tmp;
- outb(index, W836_INDEX); - tmp = inb(W836_DATA) & ~mask; - outb(tmp | (data & mask), W836_DATA); + outb(reg, index); + tmp = inb(index+1) & ~mask; + outb(tmp | (data & mask), index+1); }
/** @@ -248,37 +245,80 @@ * - Agami Aruma * - IWILL DK8-HTX */ -static int w83627hf_gpio24_raise(const char *name) +static int w83627hf_gpio24_raise(uint16_t index, const char *name) { - w836xx_ext_enter(); + w836xx_ext_enter(index);
/* Is this the w83627hf? */ - if (wbsio_read(0x20) != 0x52) { /* SIO device ID register */ + if (wbsio_read(index, 0x20) != 0x52) { /* Super I/O device ID register */ fprintf(stderr, "\nERROR: %s: W83627HF: Wrong ID: 0x%02X.\n", - name, wbsio_read(0x20)); - w836xx_ext_leave(); + name, wbsio_read(index, 0x20)); + w836xx_ext_leave(index); return -1; }
/* PIN89S: WDTO/GP24 multiplex -> GPIO24 */ - wbsio_mask(0x2B, 0x10, 0x10); + wbsio_mask(index, 0x2B, 0x10, 0x10);
- wbsio_write(0x07, 0x08); /* Select logical device 8: GPIO port 2 */ + wbsio_write(index, 0x07, 0x08); /* Select logical device 8: GPIO port 2 */
- wbsio_mask(0x30, 0x01, 0x01); /* Activate logical device. */ + wbsio_mask(index, 0x30, 0x01, 0x01); /* Activate logical device. */
- wbsio_mask(0xF0, 0x00, 0x10); /* GPIO24 -> output */ + wbsio_mask(index, 0xF0, 0x00, 0x10); /* GPIO24 -> output */
- wbsio_mask(0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */ + wbsio_mask(index, 0xF2, 0x00, 0x10); /* Clear GPIO24 inversion */
- wbsio_mask(0xF1, 0x10, 0x10); /* Raise GPIO24 */ + wbsio_mask(index, 0xF1, 0x10, 0x10); /* Raise GPIO24 */
- w836xx_ext_leave(); + w836xx_ext_leave(index);
return 0; }
+static int w83627hf_gpio24_raise_2e(const char *name) +{ + return w83627hf_gpio24_raise(0x2d, name); +} + /** + * Winbond W83627THF: GPIO 4, bit 4 + * + * Suited for: + * - MSI K8N-NEO3 + */ +static int w83627thf_gpio4_4_raise(uint16_t index, const char *name) +{ + w836xx_ext_enter(index); + /* Is this the w83627thf? */ + if (wbsio_read(index, 0x20) != 0x82) { /* Super I/O device ID register */ + fprintf(stderr, "\nERROR: %s: W83627THF: Wrong ID: 0x%02X.\n", + name, wbsio_read(index, 0x20)); + w836xx_ext_leave(index); + return -1; + } + + /* PINxxxxS: GPIO4/bit 4 multiplex -> GPIOXXX */ + + wbsio_write(index, 0x07, 0x09); /* Select logical device 9: GPIO port 4 */ + + wbsio_mask(index, 0x30, 0x02, 0x02); /* Activate logical device. */ + + wbsio_mask(index, 0xF4, 0x00, 0x10); /* GPIO4 bit 4 -> output */ + + wbsio_mask(index, 0xF6, 0x00, 0x10); /* Clear GPIO4 bit 4 inversion */ + + wbsio_mask(index, 0xF5, 0x10, 0x10); /* Raise GPIO4 bit 4 */ + + w836xx_ext_leave(index); + + return 0; +} + +static int w83627thf_gpio4_4_raise_4e(const char *name) +{ + return w83627thf_gpio4_4_raise(0x4E, name); +} +/** * Suited for VIAs EPIA M and MII, and maybe other CLE266 based EPIAs. * * We don't need to do this when using LinuxBIOS, GPIO15 is never lowered there. @@ -335,12 +375,12 @@ pci_write_byte(dev, 0x59, val);
/* Raise ROM MEMW# line on Winbond w83697 SuperIO */ - w836xx_ext_enter(); + w836xx_ext_enter(0x2E);
- if (!(wbsio_read(0x24) & 0x02)) /* flash rom enabled? */ - wbsio_mask(0x24, 0x08, 0x08); /* enable MEMW# */ + if (!(wbsio_read(0x2E, 0x24) & 0x02)) /* flash rom enabled? */ + wbsio_mask(0x2E, 0x24, 0x08, 0x08); /* enable MEMW# */
- w836xx_ext_leave(); + w836xx_ext_leave(0x2E);
return 0; } @@ -487,9 +527,11 @@ {0x10de, 0x0360, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, "gigabyte", "m57sli", "GIGABYTE GA-M57SLI", it87xx_probe_serial_flash}, {0x1022, 0x7468, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, - "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise}, + "iwill", "dk8_htx", "IWILL DK8-HTX", w83627hf_gpio24_raise_2e}, + {0x10de, 0x005e, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + "msi", "k8n-neo3", "MSI K8N Neo3", w83627thf_gpio4_4_raise_4e}, {0x1022, 0x746B, 0x1022, 0x36C0, 0x0000, 0x0000, 0x0000, 0x0000, - "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise}, + "AGAMI", "ARUMA", "agami Aruma", w83627hf_gpio24_raise_2e}, {0x1106, 0x3177, 0x1106, 0xAA01, 0x1106, 0x3123, 0x1106, 0xAA01, NULL, NULL, "VIA EPIA M/MII/...", board_via_epia_m}, {0x1106, 0x3177, 0x1043, 0x80A1, 0x1106, 0x3205, 0x1043, 0x8118, @@ -509,8 +551,8 @@ * Match boards on LinuxBIOS table gathered vendor and part name. * Require main PCI IDs to match too as extra safety. */ -static struct board_pciid_enable *board_match_linuxbios_name(char *vendor, - char *part) +static struct board_pciid_enable *board_match_linuxbios_name(char *vendor, + char *part) { struct board_pciid_enable *board = board_pciid_enables;
@@ -525,10 +567,11 @@ continue;
if (board->second_vendor && - !pci_dev_find(board->second_vendor, board->second_device)) + !pci_dev_find(board->second_vendor, board->second_device)) continue; return board; } + printf("NOT FOUND %s:%s\n", vendor, part); return NULL; }
@@ -545,20 +588,20 @@ continue;
if (!pci_card_find(board->first_vendor, board->first_device, - board->first_card_vendor, - board->first_card_device)) + board->first_card_vendor, + board->first_card_device)) continue;
if (board->second_vendor) { if (board->second_card_vendor) { if (!pci_card_find(board->second_vendor, - board->second_device, - board->second_card_vendor, - board->second_card_device)) + board->second_device, + board->second_card_vendor, + board->second_card_device)) continue; } else { if (!pci_dev_find(board->second_vendor, - board->second_device)) + board->second_device)) continue; } } @@ -582,7 +625,7 @@
if (board) { printf("Found board "%s": Enabling flash write... ", - board->name); + board->name);
ret = board->enable(board->name); if (ret)
Modified: trunk/util/flashrom/jedec.c =================================================================== --- trunk/util/flashrom/jedec.c 2007-10-11 18:30:05 UTC (rev 2849) +++ trunk/util/flashrom/jedec.c 2007-10-12 21:22:40 UTC (rev 2850) @@ -281,7 +281,7 @@ // dumb check if erase was successful. for (i = 0; i < total_size; i++) { if (bios[i] != (uint8_t) 0xff) { - printf("ERASE FAILED\n"); + printf("ERASE FAILED @%d, val %02x\n", i, bios[i]); return -1; } }