On Sat, 2012-06-30 at 12:44 -0600, Marc Jones wrote:
On Sat, Jun 30, 2012 at 12:01 PM, Kyösti Mälkki
On Sat, 2012-06-30 at 18:18 +0200, Denis
'GNUtoo' Carikli wrote:
me and Kyösti Mälkki(kmalkki on IRC) figured out how to workarround the
If I installed 4GB of ram in the m4a785t-m the screen comes up,however
If I only installed 2GB of ram it worked fine.
I made a patch(I'll send it right after that email) but it seem to break
graphics for the case where 2GB of ram is installed.
So I wonder what would be the correct fix(a fix that would work for
Explanation of the patch that will be sent right after the mail:
"basek - mmio_basek;" should be 1048576 (1G):
According to Kyösti Mälkki the correct value for the sizek is 1048576.
So I looked for what could create that size and found that.
I'm not convinced that "basek - mmio_basek" is the right fix but at
least we're in the right direction.
My explanation of the issue: uma_memory_size must reduce the size of the
last RAM resource _below_ 4GB. It now touches the last RAM resource,
even if located over 4GB.
Yes, The UMA graphics memory is allocated in the lower 4GB. I think
that should be happening in mainboard.c. See the AMD reference
Do you mean the following:
uint64_t uma_memory_base, uma_memory_size;
int add_mainboard_resources(struct lb_memory *mem)
With the addition of "select HAVE_MAINBOARD_RESOURCES" in Kconfig ?
if so I already tried that change alone(without other changes) and it
didn't work, I don't remember what it did exactly tough, I can retry if