Dear Dr. Lu,
I tried to boot kernel on ide hdd with etherboot , but after it shown "Jumping to entry point " , it restart again and again. (the log is below) ? what maybe the problem?
And is there any good news for Nvidia mcp55?
Thanks.
bxshi
Etherboot 5.4.2 (GPL) http://etherboot.org
Drivers: TG3 FILO Images: NBI ELF
Protocols: DHCP TFTP
Relocating _text from: [000100e0,000682d0) to [3fea7e10,3ff00000)
Boot from (N)etwork (D)isk or (Q)uit?
Probing pci nic...
Probing isa nic...
Probing pci disk...
[FILO]FILO version 0.4.1 (root@suse101) Mon Sep 18 18:52:42 CST 2006
Press <Enter> for default boot, or <Esc> for boot prompt... timed out
boot: hda1:/vmlinuz-2.4.20-6smp initrd=/initrd-2.4.20-6smp.img ro root=/dev/hda2 console=tty0 console=ttyS0,10
hda: LBA: FUJITSU MHV2040AT
Mounted ext2fs
Found Linux version 2.4.20-6smp (bhcompile@sylvester.devel.redhat.com) #1 SMP Thu Feb 27 09:36:38 EST 2003 bz.
Loading kernel... ok
Loading initrd... ok
Jumping to entry point...
INIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} ---
Issuing SOFT_RESET...
*****CONFIDENTIAL INFORMATION*****
This email is intended only for the use of the person or entity to whom it is addressed and contains information that may be subject to and/or may be restricted from disclosure by contract or applicable law. If you are not the intended recipient of this email, be advised that any disclosure, copy, distribution or use of the contents of this message is strictly prohibited. If you are not the intended recipient of this email, please notify the sender that you have received this in error by replying to this message. Then, please delete it from your system. Thank you.