Hi, all, The new auto-generated acpi table doesn't seem to be correct on dbm690t. Dose anybody have any idea?
Joe
Please check the dmesg:
Booting 'Ubuntu 8.04, kernel 2.6.24-amd2-generic-serial'
root (hd0,0) kernel /boot/vmlinuz-2.6.24-amd2-generic root=UUID=7bb9e8a5-cbc0-4104-92a3-628 f56924494 ro console=ttyS0,115200 initrd /boot/initrd.img-2.6.24-amd2-generic
Booting 'hda1:/boot/vmlinuz-2.6.24-amd2-generic root=UUID=7bb9e8a5-cbc0-4104-92 a3-628f56924494 ro console=ttyS0,115200 initrd=/boot/initrd.img-2.6.24-amd2-gen eric' Mounted EXT2 filesystem Mounted EXT2 filesystem Found Linux version 2.6.24-amd2-generic (root@forsteri) #1 SMP Tue Jul 15 22:02:29 UTC 2008 bzI mage. Loading kernel... ok Loading initrd... ok Jumping to entry point... [ 0.000000] Linux version 2.6.24-amd2-generic (root@forsteri) (gcc version 4.2.3 (Ubuntu 4.2 .3-2ubuntu7)) #1 SMP Tue Jul 15 22:02:29 UTC 2008 (Ubuntu 2.6.24-amd2.2-generic) [ 0.000000] Command line: root=UUID=7bb9e8a5-cbc0-4104-92a3-628f56924494 ro console=ttyS0,11 5200 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000004000000 (usable) [ 0.000000] end_pfn_map = 16384 [ 0.000000] DMI not present or invalid. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F0400 checksum 0 [ 0.000000] ACPI: RSDP 000F0400, 0024 (r2 CORE ) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] CPU has 2 num_cores [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000004000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000004000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 160 [ 0.000000] 0: 256 -> 16384 [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: ATI MPTABLE: Product ID: DBM690T MPTABLE: APIC at: 0x FEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] I/O APIC #2 at 0xFEC00000. [ 0.000000] Setting APIC routing to flat [ 0.000000] Processors: 2 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 4000000:fc000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 14857 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=7bb9e8a5-cbc0-4104-92a3-628f56924494 ro console=t tyS0,115200 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 256 (order: 8, 2048 bytes) [ 0.000000] TSC calibrated against PIT [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.000000] time.c: Detected 2100.115 MHz processor. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] Checking aperture... [ 0.000000] CPU 0: aperture @ f8000000 size 64 MB [ 0.000000] Memory: 51848k/65536k available (2466k kernel code, 13304k reserved, 1313k data, 316k init) [ 0.000000] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 0.000000] Calibrating delay using timer specific routine.. 4203.67 BogoMIPS (lpj=8407353) [ 0.000000] Security Framework initialized [ 0.000000] SELinux: Disabled at boot. [ 0.000000] AppArmor: AppArmor initialized [ 0.000000] Failure registering capabilities with primary security module. [ 0.000000] Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Mount-cache hash table entries: 256 [ 0.000000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000000] CPU 0/0 -> Node 0 [ 0.000000] CPU: Physical Processor ID: 0 [ 0.000000] CPU: Processor Core ID: 0 [ 0.000000] SMP alternatives: switching to UP code [ 0.000000] Early unpacking initramfs... done [ 0.000000] ACPI: Core revision 20070126 [ 0.000000] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from A CPI tables [20070126] [ 0.000000] ACPI: Unable to load the System Description Tables [ 0.000000] ExtINT not setup in hardware but reported by MP table [ 0.000000] Using local APIC timer interrupts. [ 0.000000] Detected 12.500 MHz APIC timer. [ 0.000000] SMP alternatives: switching to SMP code [ 0.000000] Booting processor 1/2 APIC 0x1 [ 0.000000] Initializing CPU#1 [ 0.000000] Calibrating delay using timer specific routine.. 4200.24 BogoMIPS (lpj=8400480) [ 0.000000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000000] CPU 1/1 -> Node 0 [ 0.000000] CPU: Physical Processor ID: 0 [ 0.000000] CPU: Processor Core ID: 1 [ 0.000000] AMD Turion(tm) 64 X2 Mobile Technology TL-62 stepping 02 [ 0.000000] Brought up 2 CPUs [ 0.000000] net_namespace: 120 bytes [ 0.000000] Time: 4:46:48 Date: 04/13/09 [ 0.000000] NET: Registered protocol family 16 [ 0.000000] PCI: Using configuration type 1 [ 0.000000] ACPI: Interpreter disabled. [ 0.000000] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.000000] pnp: PnP ACPI: disabled [ 0.000000] PCI: Probing PCI hardware [ 0.000000] pci 0000:00:12.0: set SATA to AHCI mode [ 0.000000] PCI: Transparent bridge - 0000:00:14.4 [ 0.000000] PCI: Using IRQ router default [1002/4384] at 0000:00:14.4 [ 0.000000] PCI: Cannot allocate resource region 0 of device 0000:05:00.0 [ 0.000000] NET: Registered protocol family 8 [ 0.000000] NET: Registered protocol family 20 [ 0.000000] AppArmor: AppArmor Filesystem Enabled [ 0.000000] PCI: Bridge: 0000:00:01.0 [ 0.000000] IO window: 1000-1fff [ 0.000000] MEM window: fc000000-fc1fffff [ 0.000000] PREFETCH window: f0000000-f7ffffff [ 0.000000] PCI: Bridge: 0000:00:04.0 [ 0.000000] IO window: disabled. [ 0.000000] MEM window: disabled. [ 0.000000] PREFETCH window: disabled. [ 0.000000] PCI: Bridge: 0000:00:05.0 [ 0.000000] IO window: disabled. [ 0.000000] MEM window: disabled. [ 0.000000] PREFETCH window: disabled. [ 0.000000] PCI: Bridge: 0000:00:06.0 [ 0.000000] IO window: disabled. [ 0.000000] MEM window: disabled. [ 0.000000] PREFETCH window: disabled. [ 0.000000] PCI: Bridge: 0000:00:07.0 [ 0.000000] IO window: disabled. [ 0.000000] MEM window: 10000000-100fffff [ 0.000000] PREFETCH window: disabled. [ 0.000000] PCI: Bridge: 0000:00:14.4 [ 0.000000] IO window: disabled. [ 0.000000] MEM window: disabled. [ 0.000000] PREFETCH window: disabled. [ 0.000000] PCI: Enabling device 0000:00:07.0 (0000 -> 0002) [ 0.000000] NET: Registered protocol family 2 [ 0.000000] IP route cache hash table entries: 512 (order: 0, 4096 bytes) [ 0.000000] TCP established hash table entries: 2048 (order: 3, 32768 bytes) [ 0.000000] TCP bind hash table entries: 2048 (order: 3, 32768 bytes) [ 0.000000] TCP: Hash tables configured (established 2048 bind 2048) [ 0.000000] TCP reno registered [ 0.000000] checking if image is initramfs... it is [ 0.000000] Freeing initrd memory: 7452k freed [ 0.000000] audit: initializing netlink socket (disabled) [ 0.000000] audit(1239598008.456:1): initialized [ 0.000000] VFS: Disk quotas dquot_6.5.1 [ 0.000000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.000000] io scheduler noop registered [ 0.000000] io scheduler anticipatory registered [ 0.000000] io scheduler deadline registered [ 0.000000] io scheduler cfq registered (default) [ 0.000000] assign_interrupt_mode Found MSI capability [ 0.000000] assign_interrupt_mode Found MSI capability [ 0.000000] assign_interrupt_mode Found MSI capability [ 0.000000] assign_interrupt_mode Found MSI capability [ 0.000000] Real Time Clock Driver v1.12ac [ 0.000000] Linux agpgart interface v0.102 [ 0.000000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 0.000000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.000000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 0.000000] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.000000] PNP: No PS/2 controller found. Probing ports directly. [ 0.000000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.000000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.000000] mice: PS/2 mouse device common for all mice [ 0.000000] cpuidle: using governor ladder [ 0.000000] cpuidle: using governor menu [ 0.000000] NET: Registered protocol family 1 [ 0.000000] registered taskstats version 1 [ 0.000000] Magic number: 5:620:767 [ 0.000000] hash matches device ptyp3 [ 0.000000] /root/build/ubuntu/linux-source/linux-source/drivers/rtc/hctosys.c: unable to op en rtc device (rtc0) [ 0.000000] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.000000] EDD information not available. [ 0.000000] Freeing unused kernel memory: 316k freed Loading, please wait... Begin: Loading essential drivers... ... [ 0.000000] thermal: Unknown symbol acpi_processor_set_thermal_limit Done. Begin: Running /scripts/init-premount ... Done. Begin: Mounting root file system... ... Begin: Running /scripts/local-top ... Done. [ 0.000000] tg3.c:v3.86 (November 9, 2007) Begin: Waiting f[ 0.000000] PCI: Enabling device 0000:05:00.0 (0000 -> 0002) or root file sys[ 0.000000] PCI: No IRQ known for interrupt pin A of device 0000:05:00.0. Pr obably buggy MP table. tem... ... [ 0.000000] SCSI subsystem initialized [ 0.000000] tg3: eth%d: Cannot get nvarm lock, tg3_nvram_init failed. [ 0.000000] tg3: (0000:05:00.0) phy probe failed, err -19 [ 0.000000] tg3: Problem fetching invariants of chip, aborting. [ 0.000000] usbcore: registered new interface driver usbfs [ 0.000000] usbcore: registered new interface driver hub [ 0.000000] usbcore: registered new device driver usb [ 0.000000] scsi0 : pata_atiixp [ 0.000000] scsi1 : pata_atiixp [ 0.000000] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2010 irq 14 [ 0.000000] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2018 irq 15 [ 0.000000] PCI: No IRQ known for interrupt pin A of device 0000:00:12.0. Probably buggy MP table. [ 0.000000] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 0.000000] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP [ 0.000000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.000000] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part [ 0.000000] WARNING: at /root/build/ubuntu/linux-source/linux-source/drivers/ata/libata-core .c:7238 ata_host_activate() [ 0.000000] Pid: 1291, comm: modprobe Not tainted 2.6.24-amd2-generic #1 [ 0.000000] [ 0.000000] Call Trace: [ 0.000000] [<ffffffff8807135e>] :libata:ata_host_activate+0x13e/0x140 [ 0.000000] [<ffffffff880cabc8>] :ahci:ahci_init_one+0x988/0xb80 [ 0.000000] [<ffffffff803588b8>] pci_device_probe+0xf8/0x170 [ 0.000000] [<ffffffff803b9fcc>] driver_probe_device+0x9c/0x1b0 [ 0.000000] [<ffffffff803ba299>] __driver_attach+0xc9/0xd0 [ 0.000000] [<ffffffff803ba1d0>] __driver_attach+0x0/0xd0 [ 0.000000] [<ffffffff803b920d>] bus_for_each_dev+0x4d/0x80 [ 0.000000] [<ffffffff803b961c>] bus_add_driver+0xac/0x220 [ 0.000000] [<ffffffff80358b39>] __pci_register_driver+0x69/0xb0 [ 0.000000] [<ffffffff80263b6e>] sys_init_module+0x18e/0x1a90 [ 0.000000] [<ffffffff8020c37e>] system_call+0x7e/0x83 [ 0.000000] [ 0.000000] scsi2 : ahci [ 0.000000] scsi3 : ahci [ 0.000000] scsi4 : ahci [ 0.000000] scsi5 : ahci [ 0.000000] ata3: SATA max UDMA/133 abar m1024@0xfc209000 port 0xfc209100 [ 0.000000] ata4: SATA max UDMA/133 abar m1024@0xfc209000 port 0xfc209180 [ 0.000000] ata5: SATA max UDMA/133 abar m1024@0xfc209000 port 0xfc209200 [ 0.000000] ata6: SATA max UDMA/133 abar m1024@0xfc209000 port 0xfc209280 [ 0.000000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.000000] ata3.00: qc timeout (cmd 0xec) [ 0.000000] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 0.000000] ata3: failed to recover some devices, retrying in 5 secs [ 0.000000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.000000] ata3.00: qc timeout (cmd 0xec) [ 0.000000] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 0.000000] ata3: failed to recover some devices, retrying in 5 secs [ 0.000000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.000000] ata3.00: qc timeout (cmd 0xec) [ 0.000000] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 0.000000] ata3: failed to recover some devices, retrying in 5 secs [ 0.000000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.000000] ata4: SATA link down (SStatus 0 SControl 300) [ 0.000000] ata5: SATA link down (SStatus 0 SControl 300) [ 0.000000] ata6: SATA link down (SStatus 0 SControl 300) [ 0.000000] PCI: No IRQ known for interrupt pin A of device 0000:00:13.0. Probably buggy MP table. [ 0.000000] ohci_hcd 0000:00:13.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.0 setup! [ 0.000000] ohci_hcd 0000:00:13.0: init 0000:00:13.0 fail, -19 [ 0.000000] PCI: No IRQ known for interrupt pin B of device 0000:00:13.1. Probably buggy MP table. [ 0.000000] ohci_hcd 0000:00:13.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.1 setup! [ 0.000000] ohci_hcd 0000:00:13.1: init 0000:00:13.1 fail, -19 [ 0.000000] PCI: No IRQ known for interrupt pin C of device 0000:00:13.2. Probably buggy MP table. [ 0.000000] ohci_hcd 0000:00:13.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.2 setup! [ 0.000000] ohci_hcd 0000:00:13.2: init 0000:00:13.2 fail, -19 [ 0.000000] PCI: No IRQ known for interrupt pin B of device 0000:00:13.3. Probably buggy MP table. [ 0.000000] ohci_hcd 0000:00:13.3: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.3 setup! [ 0.000000] ohci_hcd 0000:00:13.3: init 0000:00:13.3 fail, -19 [ 0.000000] PCI: No IRQ known for interrupt pin C of device 0000:00:13.4. Probably buggy MP table. [ 0.000000] ohci_hcd 0000:00:13.4: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.4 setup! [ 0.000000] ohci_hcd 0000:00:13.4: init 0000:00:13.4 fail, -19 [ 0.000000] PCI: No IRQ known for interrupt pin D of device 0000:00:13.5. Probably buggy MP table. [ 0.000000] ehci_hcd 0000:00:13.5: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.5 setup! [ 0.000000] ehci_hcd 0000:00:13.5: init 0000:00:13.5 fail, -19 [ 0.000000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 0.000000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Done. Check root= bootarg cat /proc/cmdline or missing modules, devices: cat /proc/modules ls /dev ALERT! /dev/disk/by-uuid/7bb9e8a5-cbc0-4104-92a3-628f56924494 does not exist. Dropping to a she ll!