[coreboot] [PATCH] flashrom: let spi_res read in 2 bytes

[FENG Yu Ning]

Seeing RES, most chips output model_id repeatedly, but some early
chip(s? sst25lf0x0a) output manuf_id and model_id alternatively. Add
support for it.

There are other problems to solve until ich7 spi chips could be better
supported.
1. Some boards have opmenu locked down. For those boards, we had
better build an opcode table according to the current opmenu, instead
of writing one into it.
2. ich7(or the compatible spi chips it controls) does address
translation. We need to recalculate and rewrite the command address
before we let it go.

Signed-off-by: FENG yu ning

Index: flashrom/spi.c
===================================================================
--- flashrom/spi.c	(revision 3775)
+++ flashrom/spi.c	(working copy)
@@ -77,7 +77,7 @@

if (spi_command(sizeof(cmd), JEDEC_RES_INSIZE, cmd, readarr))
    	return 1;
-	printf_debug("RES returned %02x.\n", readarr[0]);
+	printf_debug("RES returned %02x %02x.\n", readarr[0], readarr[1]);
    return 0;
 }

@@ -198,7 +198,9 @@

int probe_spi_res(struct flashchip *flash)
 {
+	/* asserts 3 >= MAX(JEDEC_RDID_INSIZE, JEDEC_RES_INSIZE) */
    unsigned char readarr[3];
+	uint32_t manuf_id;
    uint32_t model_id;

/* Check if RDID was successful and did not return 0xff 0xff 0xff.
@@ -211,11 +213,25 @@
    if (spi_res(readarr))
    	return 0;

-	model_id = readarr[0];
-	printf_debug("%s: id 0x%x\n", __FUNCTION__, model_id);
-	if (model_id != flash->model_id)
-		return 0;
+	/* spi_res reads in 2 bytes. Seeing RES(0xab), most chips output
+	 * model_id repeatedly, some(like sst25lf0x0a) output manuf_id and
+	 * model_id alternatively.
+	 */
+	if (readarr[0] == readarr[1]) {
+		model_id = readarr[0];
+		printf_debug("%s: id 0x%x\n", __FUNCTION__, model_id);
+		if (model_id != flash->model_id)
+			return 0;
+	} else {
+		manuf_id = readarr[0];
+		model_id = readarr[1];
+		printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, manuf_id,
+			     model_id);
+		if (manuf_id != flash->manufacture_id || model_id != flash->model_id)
+			return 0;
+	}

+
    /* Print the status register to tell the
     * user about possible write protection.
     */
Index: flashrom/spi.h
===================================================================
--- flashrom/spi.h	(revision 3775)
+++ flashrom/spi.h	(working copy)
@@ -37,7 +37,7 @@
 /* Read Electronic Signature */
 #define JEDEC_RES		0xab
 #define JEDEC_RES_OUTSIZE	0x04
-#define JEDEC_RES_INSIZE	0x01
+#define JEDEC_RES_INSIZE	0x02

/* Write Enable */
 #define JEDEC_WREN		0x06