Ramesh,
At 04:02 02/03/2005, ramesh bios wrote:
- Shadow RAM
I guess I would need to find a way to tell the northbridge to enable shadow RAM for some range around f0000. I looked through the CS5530A datasheet and see shadow registers but no mention of shadowing RAM. Nor in the GX1 datasheet either. I'm looking for some register in either the GX1 or the CS5530A that would enable this. I am looking for some register that would enable me to remap the C0000-F0000 address range to somewhere in sdram. Is that the right thing to be looking for?
I think you may need to look at your settings for the BC_XMAP_2 and BC_XMAP_3 registers on the GX1 - these control read and write access to the BIOS shadow ram regions.
- Uncompressed payload
I'm not sure I understand what this means. Right now, my payload is filo. In the build, I see:
dd conv=sync bs=196608 if=/bios/filo-0.4.2/filo.elf of=payload.block cat payload.block > romimage
Oh, I guess you must mean this stuff:
objcopy -O binary linuxbios_c linuxbios_payload.bin ./nrv2b e linuxbios_payload.bin linuxbios_payload.nrv2b
So I guess there is some kind of compression going on there.
Not sure if you're using Linuxbios V1 or V2 but in V1 there is an option in your build config file to turn off compression - you probably need something like:
option CONFIG_COMPRESS=0
If it's V2 then no doubt there is an equivalent there too.
Which method would be the right thing to do? I'll look at the shadow ram thing first then.
Thanks.
Nope this helps
Ian
--- "Ronald G. Minnich" rminnich@lanl.gov wrote:
On Tue, 1 Mar 2005, ramesh bios wrote:
Strike that. The issue is somewhere with copy_pirq_routing_table. IE: why does the copy to f0000 fail. I had assumed that the 500 address was
an
alternate location that the table was copied to.
So
now, I'm looking at that f000 failure.
the copy to f0000 fails because shadow ram is not set up.
You can fix this one of two ways. One is to figure out how to enable shadow ram. The second is to make the payload uncompressed. The copy will still fail but linux will find the PIRQ table anyway.
ron _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org
http://www.clustermatic.org/mailman/listinfo/linuxbios
Do you Yahoo!? Yahoo! Mail - 250MB free storage. Do more. Manage less. http://info.mail.yahoo.com/mail_250 _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios