Hello,
With all due respect do you really think that an extra cpu would fix this problem? I've looked at filo and to the best of my knowledge I did not see any SMP related calls in there. I sincerely appreciate your help, but I do not think this is the culprit.
Thanks, Dave
On Tue, 2004-07-13 at 12:49, YhLu wrote:
Can you get two cpus for the S2885? I would send my rom image to you for test.
Regards
YH
From:David Aubin [mailto:daubin@actuality-systems.com] Sent: Tuesday, July 13, 2004 9:09 AM To: Peter Stuge Cc: LinuxBIOS Subject: Re: Filo Error Help
Hi,
No no no, the disk. The initrd is ext2.
Tried changing the disk to ext2 and still get the same results.
This did work, but is not what I need.
- Etherboot the filo.elf (4.2) as a payload
- Run the filo.elf
- It is able to load my kernel & initrd.elf, only off of the hd, not
the usb stick.
Arg!
My setup uses etherboot as a primary to get the kernel & intird as an elf. But if that connection dies I want it to use the kernel & initrd elf on my usb stick. This first part works just fine. It is finding a way to get the second part that is taking me weeks! :(
On Tue, 2004-07-13 at 11:48, Peter Stuge wrote:
On Tue, Jul 13, 2004 at 11:35:01AM -0400, David Aubin wrote:
Thank yo for the image, but oddly it fails exactly the same way.... Found initrd block 0 crc error
I'm using reiserfs, I'll try ext2. I'm really running out of ideas.
For the initrd? I believe only ext2, minix, cramfs and perhaps one other filesystem is actually supported for initrd:s.
//Peter _______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios
