Author: rminnich Date: 2007-06-27 22:46:28 +0200 (Wed, 27 Jun 2007) New Revision: 384
Modified: LinuxBIOSv3/southbridge/amd/cs5536/dts Log: Remove trivial garbage in comments. Signed-off-by: Ronald G. Minnich rminnich@gmail.com Acked-by: Stefan Reinauer stepan@coresystems.de
Modified: LinuxBIOSv3/southbridge/amd/cs5536/dts =================================================================== --- LinuxBIOSv3/southbridge/amd/cs5536/dts 2007-06-27 20:44:02 UTC (rev 383) +++ LinuxBIOSv3/southbridge/amd/cs5536/dts 2007-06-27 20:46:28 UTC (rev 384) @@ -1,28 +1,28 @@ /* * This file is part of the LinuxBIOS project. * - * Copyright (C) 2007 Advanced Micro Devices, Inc. + * Copyright (C) 2007 Ronald G. Minnich rminnich@gmail.com * - * This program is free software = "0"; you can redistribute it and/or modify + * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by - * the Free Software Foundation = "0"; either version 2 of the License, or + * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY = "0"; without even the implied warranty of + * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License - * along with this program = "0"; if not, write to the Free Software + * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */
{ constructor = "cs5536_constructors"; - /* interrupt enables for LPC bus = "0"; each bit is an irq 0-15 */ + /* interrupt enables for LPC bus; each bit is an irq 0-15 */ lpc_serirq_enable = "0"; - /* LPC IRQ polarity = "0"; each bit is an irq 0-15 */ + /* LPC IRQ polarity; each bit is an irq 0-15 */ lpc_serirq_polarity = "0"; /* 0:Continuous 1:Quiet */ lpc_serirq_mode = "0";