Author: uwe Date: 2007-09-21 17:56:05 +0200 (Fri, 21 Sep 2007) New Revision: 2797
Added: trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/ trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/Config.lb trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/Options.lb trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/apc_auto.c trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/cache_as_ram_auto.c trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/chip.h trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/cmos.layout trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/get_bus_conf.c trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/irq_tables.c trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/mainboard.c trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/mptable.c trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/resourcemap.c trunk/LinuxBIOSv2/targets/msi/ms7260/ trunk/LinuxBIOSv2/targets/msi/ms7260/Config.lb Log: Add support for the MSI MS-7260 (K9N Neo) mainboard.
Signed-off-by: Uwe Hermann uwe@hermann-uwe.de Acked-by: Ward Vandewege ward@gnu.org
Added: trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/Config.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/Config.lb (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/Config.lb 2007-09-21 15:56:05 UTC (rev 2797) @@ -0,0 +1,312 @@ +## +## This file is part of the LinuxBIOS project. +## +## Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +if USE_FAILOVER_IMAGE + default ROM_SECTION_SIZE = FAILOVER_SIZE + default ROM_SECTION_OFFSET = (ROM_SIZE - FAILOVER_SIZE) +else + if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE) + else + default ROM_SECTION_SIZE = (ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE) + default ROM_SECTION_OFFSET = 0 + end +end + +default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE) +default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) +default _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE) +default XIP_ROM_SIZE = 65536 + +if USE_FAILOVER_IMAGE + default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) +else + if USE_FALLBACK_IMAGE + default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE) + else + default XIP_ROM_BASE = (_ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) + end +end + +arch i386 end + +driver mainboard.o +object get_bus_conf.o # Needed by irq_tables and mptable (and acpi_tables). +if HAVE_MP_TABLE object mptable.o end +if HAVE_PIRQ_TABLE object irq_tables.o end +# object reset.o + +if USE_DCACHE_RAM + if CONFIG_USE_INIT + makerule ./cache_as_ram_auto.o + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + end + else + makerule ./cache_as_ram_auto.inc + depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@" + action "perl -e 's/.rodata/.rom.data/g' -pi $@" + action "perl -e 's/.text/.section .rom.text/g' -pi $@" + end + end +end + +if USE_FAILOVER_IMAGE +else + if CONFIG_AP_CODE_IN_CAR + makerule ./apc_auto.o + depends "$(MAINBOARD)/apc_auto.c option_table.h" + action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@" + end + ldscript /arch/i386/init/ldscript_apc.lb + end +end + +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end +else + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end +end + +mainboardinit cpu/x86/32bit/entry32.inc + +if USE_DCACHE_RAM + if CONFIG_USE_INIT + ldscript /cpu/x86/32bit/entry32.lds + end + if CONFIG_USE_INIT + ldscript /cpu/amd/car/cache_as_ram.lds + end +end + +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end +else + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end +end + +mainboardinit southbridge/nvidia/mcp55/id.inc +ldscript /southbridge/nvidia/mcp55/id.lds + +# ROMSTRAP table for MCP55. +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + mainboardinit southbridge/nvidia/mcp55/romstrap.inc + ldscript /southbridge/nvidia/mcp55/romstrap.lds + end +else + if USE_FALLBACK_IMAGE + mainboardinit southbridge/nvidia/mcp55/romstrap.inc + ldscript /southbridge/nvidia/mcp55/romstrap.lds + end +end + +if USE_DCACHE_RAM + mainboardinit cpu/amd/car/cache_as_ram.inc +end + +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover_failover.lds + end + end +else + if USE_FALLBACK_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds + end + end +end + +if USE_DCACHE_RAM + if CONFIG_USE_INIT + initobject cache_as_ram_auto.o + else + mainboardinit ./cache_as_ram_auto.inc + end +end + +if CONFIG_CHIP_NAME + config chip.h +end + +chip northbridge/amd/amdk8/root_complex # Root complex + device apic_cluster 0 on # APIC cluster + chip cpu/amd/socket_AM2 # CPU + device apic 0 on end # APIC + end + end + device pci_domain 0 on # PCI domain + chip northbridge/amd/amdk8 # Northbridge / mc0 + device pci 18.0 on + # Devices on link 0, link 0 == LDT 0 + chip southbridge/nvidia/mcp55 # Southbridge + device pci 0.0 on end # HT + device pci 1.0 on # LPC + chip superio/winbond/w83627ehg # Super I/O + device pnp 4e.5 on # Com1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.6 off # Com2 / IrDA + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 4e.7 on # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.8 on # Parallel port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 4e.b on # PS/2 keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 4e.c on # PS/2 mouse + irq 0x70 = 12 + end + end + end + device pci 1.1 on # SM 0 + chip drivers/generic/generic # DIMM 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic # DIMM 0-0-1 + device i2c 51 on end + end + chip drivers/generic/generic # DIMM 0-1-0 + device i2c 52 on end + end + chip drivers/generic/generic # DIMM 0-1-1 + device i2c 53 on end + end + # TODO: Needed? + # chip drivers/generic/generic # DIMM 1-0-0 + # device i2c 54 on end + # end + # chip drivers/generic/generic # DIMM 1-0-1 + # device i2c 55 on end + # end + # chip drivers/generic/generic # DIMM 1-1-0 + # device i2c 56 on end + # end + # chip drivers/generic/generic # DIMM 1-1-1 + # device i2c 57 on end + # end + end + # TODO: Check if the stuff below is correct / needed. + device pci 1.1 on # SM 1 + # PCI device SMBus address will depend on addon PCI device, + # do we need to scan_smbus_bus? + + # chip drivers/generic/generic # PCIXA Slot1 + # device i2c 50 on end + # end + # chip drivers/generic/generic # PCIXB Slot1 + # device i2c 51 on end + # end + # chip drivers/generic/generic # PCIXB Slot2 + # device i2c 52 on end + # end + # chip drivers/generic/generic # PCI Slot1 + # device i2c 53 on end + # end + # chip drivers/generic/generic # Master MCP55 PCI-E + # device i2c 54 on end + # end + # chip drivers/generic/generic # Slave MCP55 PCI-E + # device i2c 55 on end + # end + chip drivers/generic/generic # MAC EEPROM + device i2c 51 on end + end + end + device pci 2.0 on end # USB 1.1 + device pci 2.1 on end # USB 2 + device pci 4.0 on end # IDE + device pci 5.0 on end # SATA 0 + device pci 5.1 on end # SATA 1 + device pci 5.2 off end # SATA 2 (N/A on this board) + device pci 6.0 on end # PCI + device pci 6.1 on end # AZA (HD Audio) + device pci 8.0 on end # NIC + device pci 9.0 off end # NIC (N/A on this board) + device pci a.0 off end # PCI E 5 (N/A on this board?) + device pci b.0 on end # PCI E 4 + device pci c.0 on end # PCI E 3 + device pci d.0 on end # PCI E 2 + device pci e.0 on end # PCI E 1 + device pci f.0 on end # PCI E 0 + register "ide0_enable" = "1" + register "sata0_enable" = "1" + register "sata1_enable" = "1" + # TODO: Check the two lines below. + register "mac_eeprom_smbus" = "3" # 1: SMBus under 2e.8, 2: SM0 3: SM1 + register "mac_eeprom_addr" = "0x51" + end + end + device pci 18.0 on end # Link 1 + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + end + +# TODO +# chip drivers/generic/debug +# device pnp 0.0 off end # chip name +# device pnp 0.1 on end # pci_regs_all +# device pnp 0.2 on end # mem +# device pnp 0.3 off end # cpuid +# device pnp 0.4 on end # smbus_regs_all +# device pnp 0.5 off end # dual core msr +# device pnp 0.6 off end # cache size +# device pnp 0.7 off end # tsc +# device pnp 0.8 off end # io +# device pnp 0.9 off end # io +# end + +end
Added: trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/Options.lb =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/Options.lb (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/Options.lb 2007-09-21 15:56:05 UTC (rev 2797) @@ -0,0 +1,192 @@ +## +## This file is part of the LinuxBIOS project. +## +## Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses USE_FALLBACK_IMAGE +uses USE_FAILOVER_IMAGE +uses HAVE_FALLBACK_BOOT +uses HAVE_FAILOVER_BOOT +uses HAVE_HARD_RESET +uses IRQ_SLOT_COUNT +uses HAVE_OPTION_TABLE +uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_LOGICAL_CPUS +uses CONFIG_IOAPIC +uses CONFIG_SMP +uses FALLBACK_SIZE +uses FAILOVER_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_PAYLOAD +uses CONFIG_ROM_PAYLOAD_START +uses CONFIG_COMPRESSED_PAYLOAD_NRV2B +uses CONFIG_COMPRESSED_PAYLOAD_LZMA +uses CONFIG_PRECOMPRESSED_PAYLOAD +uses PAYLOAD_SIZE +uses _ROMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses STACK_SIZE +uses HEAP_SIZE +uses USE_OPTION_TABLE +uses LB_CKS_RANGE_START +uses LB_CKS_RANGE_END +uses LB_CKS_LOC +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +uses MAINBOARD +uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID +uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID +uses LINUXBIOS_EXTRA_VERSION +uses _RAMBASE +uses TTYS0_BAUD +uses TTYS0_BASE +uses TTYS0_LCS +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_CONSOLE_SERIAL8250 +uses HAVE_INIT_TIMER # ? +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY +uses CONFIG_CHIP_NAME +uses CONFIG_CONSOLE_VGA +uses CONFIG_PCI_ROM_RUN +uses CONFIG_USBDEBUG_DIRECT +uses HW_MEM_HOLE_SIZEK +uses HW_MEM_HOLE_SIZE_AUTO_INC +uses K8_HT_FREQ_1G_SUPPORT +uses HT_CHAIN_UNITID_BASE +uses HT_CHAIN_END_UNITID_BASE +uses SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_UNITID_OFFSET_ONLY +uses USE_DCACHE_RAM +uses DCACHE_RAM_BASE +uses DCACHE_RAM_SIZE +uses DCACHE_RAM_GLOBAL_VAR_SIZE +uses CONFIG_USE_INIT +uses SERIAL_CPU_INIT +uses ENABLE_APIC_EXT_ID +uses APIC_ID_OFFSET +uses LIFT_BSP_APIC_ID +uses CONFIG_PCI_64BIT_PREF_MEM +uses CONFIG_LB_MEM_TOPK +uses CONFIG_AP_CODE_IN_CAR +uses MEM_TRAIN_SEQ +uses WAIT_BEFORE_CPUS_INIT +uses CONFIG_USE_PRINTK_IN_CAR + +default ROM_SIZE = 512 * 1024 +default FALLBACK_SIZE = (256 * 1024) - (4 * 1024) +default FAILOVER_SIZE = 4 * 1024 +default CONFIG_LB_MEM_TOPK = 2048 # 1MB more for pgtbl. +default HAVE_FALLBACK_BOOT = 1 +default HAVE_FAILOVER_BOOT = 1 +default HAVE_HARD_RESET = 1 +default HAVE_PIRQ_TABLE = 1 +default IRQ_SLOT_COUNT = 11 # TODO: Check if correct. +default HAVE_MP_TABLE = 1 # TODO: Check if correct. +default HAVE_OPTION_TABLE = 1 +default CONFIG_SMP = 1 +default CONFIG_MAX_CPUS = 2 +default CONFIG_MAX_PHYSICAL_CPUS = 1 +default CONFIG_LOGICAL_CPUS = 1 +# default SERIAL_CPU_INIT = 0 +default ENABLE_APIC_EXT_ID = 0 +default APIC_ID_OFFSET = 0x10 +default LIFT_BSP_APIC_ID = 1 +default CONFIG_CHIP_NAME = 1 + +# Move the default LinuxBIOS CMOS range off of AMD RTC registers. +default LB_CKS_RANGE_START = 49 +default LB_CKS_RANGE_END = 122 +default LB_CKS_LOC = 123 + +# Memory hole size. 0 means disable, others will enable the hole. In that +# case, if it is smaller than mmio_basek, it will use mmio_basek instead. +# default HW_MEM_HOLE_SIZEK = 0x200000 # 2GB +default HW_MEM_HOLE_SIZEK = 0x100000 # 1GB +# default HW_MEM_HOLE_SIZEK = 0x80000 # 512MB + +# Make auto increase hole size to avoid hole_startk equal to basek so as +# to make some kernel happy. +# default HW_MEM_HOLE_SIZE_AUTO_INC = 1 + +# Opteron K8 1G HT support. +default K8_HT_FREQ_1G_SUPPORT = 1 + +# HT Unit ID offset, default is 1, the typical one, 0 means only one HT device. +default HT_CHAIN_UNITID_BASE = 0 + +# Real SB Unit ID, default is 0x20, mean don't touch it at last. +# default HT_CHAIN_END_UNITID_BASE = 0x6 + +# Make the SB HT chain on bus 0, default is not (0). +default SB_HT_CHAIN_ON_BUS0 = 2 + +# Only offset for SB chain? Default is yes (1). +default SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0 + +# Allow capable device use that above 4GB. +# default CONFIG_PCI_64BIT_PREF_MEM = 1 + +default CONFIG_CONSOLE_VGA = 1 # Needed for VGA. +default CONFIG_PCI_ROM_RUN = 1 # Needed for VGA. +default CONFIG_USBDEBUG_DIRECT = 0 +default USE_DCACHE_RAM = 1 +default DCACHE_RAM_BASE = 0xc8000 +default DCACHE_RAM_SIZE = 0x08000 +default DCACHE_RAM_GLOBAL_VAR_SIZE = 0x01000 +default CONFIG_USE_INIT = 0 +default CONFIG_AP_CODE_IN_CAR = 0 +default MEM_TRAIN_SEQ = 2 +default WAIT_BEFORE_CPUS_INIT = 0 +default CONFIG_IOAPIC = 1 +default MAINBOARD_PART_NUMBER = "K9N Neo (MS-7260)" +default MAINBOARD_VENDOR = "MSI" +default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1462 +default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0x7260 +default ROM_IMAGE_SIZE = 65536 +default STACK_SIZE = 0x2000 +default HEAP_SIZE = 0x8000 +default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE) +default _RAMBASE = 0x00100000 +default CONFIG_ROM_PAYLOAD = 1 +default CONFIG_COMPRESSED_PAYLOAD_NRV2B = 1 # NRV2B compression +# default CONFIG_COMPRESSED_PAYLOAD_LZMA = 1 # LZMA compression +default CC = "$(CROSS_COMPILE)gcc -m32" +default HOSTCC = "gcc" +default CONFIG_USE_PRINTK_IN_CAR = 1 +default CONFIG_CONSOLE_SERIAL8250 = 1 +default TTYS0_BAUD = 115200 +default TTYS0_BASE = 0x3f8 +default TTYS0_LCS = 0x3 +default DEFAULT_CONSOLE_LOGLEVEL = 9 +default MAXIMUM_CONSOLE_LOGLEVEL = 9 +default MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON" + +end
Added: trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/apc_auto.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/apc_auto.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/apc_auto.c 2007-09-21 15:56:05 UTC (rev 2797) @@ -0,0 +1,104 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 AMD + * (Written by Yinghai Lu yinghailu@amd.com for AMD) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 + +#define __ROMCC__ + +#define RAMINIT_SYSINFO 1 +#define CACHE_AS_RAM_ADDRESS_DEBUG 0 +#define SET_NB_CFG_54 1 /* Used by RAM init. */ +#define QRANK_DIMM_SUPPORT 1 +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 + +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif +#include "arch/i386/lib/console.c" +#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" +/* #include "cpu/x86/lapic/boot_cpu.c" */ +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c" +#include "northbridge/amd/amdk8/amdk8_f.h" +#include "cpu/x86/mtrr.h" +#include "cpu/amd/mtrr.h" +#include "cpu/x86/tsc.h" +#include "northbridge/amd/amdk8/amdk8_f_pci.c" +#include "northbridge/amd/amdk8/raminit_f_dqs.c" +#include "cpu/amd/dualcore/dualcore.c" + +void hardwaremain(int ret_addr) +{ + struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - + DCACHE_RAM_GLOBAL_VAR_SIZE); /* in CACHE */ + struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK << 10) - + DCACHE_RAM_GLOBAL_VAR_SIZE); /* in RAM */ + struct node_core_id id; + + id = get_node_core_id_x(); + + /* FIXME: For USBDEBUG_DIRECT you need to make sure dbg_info gets + * assigned in AP. + */ + print_debug("CODE IN CACHE ON NODE:"); + print_debug_hex8(id.nodeid); + print_debug("\r\n"); + + train_ram(id.nodeid, sysinfo, sysinfox); + + /* Go back, but cannot use stack any more, because we only + * keep ret_addr and can not restore esp, and ebp. + */ + __asm__ __volatile__( + "movl %0, %%edi\n\t" + "jmp *%%edi\n\t" + : : "a" (ret_addr) + ); +} + +struct eregs { + uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi; + uint32_t vector; + uint32_t error_code; + uint32_t eip; + uint32_t cs; + uint32_t eflags; +}; + +void x86_exception(struct eregs *info) +{ + while (1) + hlt(); +}
Added: trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/cache_as_ram_auto.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/cache_as_ram_auto.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/cache_as_ram_auto.c 2007-09-21 15:56:05 UTC (rev 2797) @@ -0,0 +1,345 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#define ASSEMBLY 1 +#define __ROMCC__ + +// #define CACHE_AS_RAM_ADDRESS_DEBUG 1 +// #define DEBUG_SMBUS 1 +// #define RAM_TIMING_DEBUG 1 +// #define DQS_TRAIN_DEBUG 1 +// #define RES_DEBUG 1 + +#define RAMINIT_SYSINFO 1 +#define K8_ALLOCATE_IO_RANGE 1 +// #define K8_SCAN_PCI_BUS 1 /* ? */ +#define QRANK_DIMM_SUPPORT 1 +#if CONFIG_LOGICAL_CPUS == 1 +#define SET_NB_CFG_54 1 +#endif + +/* Used by init_cpus and fidvid. */ +#define K8_SET_FIDVID 1 + +/* If we want to wait for core1 done before DQS training, set it to 0. */ +#define K8_SET_FIDVID_CORE0_ONLY 1 + +#if K8_REV_F_SUPPORT == 1 +#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0 +#endif + +#define DBGP_DEFAULT 7 + +#include <stdint.h> +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <arch/io.h> +#include <device/pnp_def.h> +#include <arch/romcc_io.h> +#include <cpu/x86/lapic.h> +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" + +#if USE_FAILOVER_IMAGE == 0 + +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#if CONFIG_USBDEBUG_DIRECT +#include "southbridge/nvidia/mcp55/mcp55_enable_usbdebug_direct.c" +#include "pc80/usbdebug_direct_serial.c" +#endif +#include "ram/ramtest.c" +#include <cpu/amd/model_fxx_rev.h> +#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" + +#endif + +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "superio/winbond/w83627ehg/w83627ehg_early_serial.c" +#include "superio/winbond/w83627ehg/w83627ehg_early_init.c" + +#if USE_FAILOVER_IMAGE == 0 + +#include "cpu/x86/bist.h" +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif +#include "northbridge/amd/amdk8/debug.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "northbridge/amd/amdk8/setup_resource_map.c" + +/* Yes, on the MSI K9N Neo (MS-7260) the Super I/O is at 0x4e! */ +#define SERIAL_DEV PNP_DEV(0x4e, W83627EHG_SP1) + +#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c" + +static void memreset_setup(void) {} +static void memreset(int controllers, const struct mem_controller *ctrl) {} +static inline void activate_spd_rom(const struct mem_controller *ctrl) {} + +static inline int spd_read_byte(unsigned int device, unsigned int address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/amdk8_f.h" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "northbridge/amd/amdk8/raminit_f.c" +#include "sdram/generic_sdram.c" +#include "resourcemap.c" +#include "cpu/amd/dualcore/dualcore.c" + +#define MCP55_NUM 1 +#define MCP55_USE_NIC 1 +#define MCP55_USE_AZA 1 +#define MCP55_PCI_E_X_0 0 + +#define MCP55_MB_SETUP \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ + RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ + +#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h" +#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c" +#include "cpu/amd/car/copy_and_run.c" +#include "cpu/amd/car/post_cache_as_ram.c" +#include "cpu/amd/model_fxx/init_cpus.c" +#include "cpu/amd/model_fxx/fidvid.c" + +#endif + +#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) + +#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" + +static void sio_setup(void) +{ + uint32_t dword; + uint8_t byte; + + byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b); + byte |= 0x20; + pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0); + dword |= (1 << 0); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword); + + dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4); + dword |= (1 << 16); + pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); +} + +void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) +{ + unsigned int last_boot_normal_x = last_boot_normal(); + + /* Is this a CPU only reset? Or is this a secondary CPU? */ + if ((cpu_init_detectedx) || (!boot_cpu())) { + if (last_boot_normal_x) + goto normal_image; + else + goto fallback_image; + } + + /* Nothing special needs to be done to find bus 0. */ + /* Allow the HT devices to be found. */ + enumerate_ht_chain(); + + sio_setup(); + + /* Setup the MCP55. */ + mcp55_enable_rom(); + + /* Is this a deliberate reset by the BIOS? */ + if (bios_reset_detected() && last_boot_normal_x) { + goto normal_image; + } + /* This is the primary CPU. How should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } else { + goto fallback_image; + } + +normal_image: + __asm__ volatile ("jmp __normal_image": + :"a" (bist), "b"(cpu_init_detectedx) + ); + +fallback_image: +#if HAVE_FAILOVER_BOOT==1 + __asm__ volatile ("jmp __fallback_image": + :"a" (bist), "b"(cpu_init_detectedx) + ) +#endif + ; +} +#endif + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx); + +void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ +#if HAVE_FAILOVER_BOOT == 1 +#if USE_FAILOVER_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); +#else + real_main(bist, cpu_init_detectedx); +#endif +#else +#if USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); +#endif + real_main(bist, cpu_init_detectedx); +#endif +} + +#if USE_FAILOVER_IMAGE == 0 + +void real_main(unsigned long bist, unsigned long cpu_init_detectedx) +{ + static const uint16_t spd_addr[] = { + (0xa << 3) | 0, (0xa << 3) | 2, 0, 0, + (0xa << 3) | 1, (0xa << 3) | 3, 0, 0, +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + (0xa << 3) | 4, (0xa << 3) | 6, 0, 0, + (0xa << 3) | 5, (0xa << 3) | 7, 0, 0, +#endif + }; + + struct sys_info *sysinfo = + (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); + int needs_reset = 0; + unsigned bsp_apicid = 0; + + if (bist == 0) + bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); + + /* FIXME: This should be part of the Super I/O code/config. */ + pnp_enter_ext_func_mode(SERIAL_DEV); + /* Switch CLKSEL to 24MHz (default is 48MHz). Needed for serial! */ + pnp_write_config(SERIAL_DEV, 0x24, 0); + w83627ehg_enable_dev(SERIAL_DEV, TTYS0_BASE); + pnp_exit_ext_func_mode(SERIAL_DEV); + + setup_mb_resource_map(); + uart_init(); + report_bist_failure(bist); /* Halt upon BIST failure. */ +#if CONFIG_USBDEBUG_DIRECT + mcp55_enable_usbdebug_direct(DBGP_DEFAULT); + early_usbdebug_direct_init(); +#endif + console_init(); + + print_debug("*sysinfo range: ["); + print_debug_hex32(sysinfo); + print_debug(","); + print_debug_hex32((unsigned long)sysinfo + sizeof(struct sys_info)); + print_debug(")\r\n"); + + print_debug("bsp_apicid="); + print_debug_hex8(bsp_apicid); + print_debug("\r\n"); + +#if MEM_TRAIN_SEQ == 1 + /* In BSP so could hold all AP until sysinfo is in RAM. */ + set_sysinfo_in_ram(0); +#endif + + setup_coherent_ht_domain(); /* Routing table and start other core0. */ + wait_all_core0_started(); + +#if CONFIG_LOGICAL_CPUS == 1 + /* It is said that we should start core1 after all core0 launched + * becase optimize_link_coherent_ht is moved out from + * setup_coherent_ht_domain, so here need to make sure last core0 is + * started, esp for two way system (there may be APIC ID conflicts in + * that case). + */ + start_other_cores(); + wait_all_other_cores_started(bsp_apicid); +#endif + + /* Set up chains and store link pair for optimization later. */ + ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ + +#if K8_SET_FIDVID == 1 + { + msr_t msr = rdmsr(0xc0010042); + print_debug("begin msr fid, vid "); + print_debug_hex32(msr.hi); + print_debug_hex32(msr.lo); + print_debug("\r\n"); + } + + enable_fid_change(); + enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); + init_fidvid_bsp(bsp_apicid); + + { + msr_t msr = rdmsr(0xc0010042); + print_debug("end msr fid, vid "); + print_debug_hex32(msr.hi); + print_debug_hex32(msr.lo); + print_debug("\r\n"); + } +#endif + + needs_reset |= optimize_link_coherent_ht(); + needs_reset |= optimize_link_incoherent_ht(sysinfo); + needs_reset |= mcp55_early_setup_x(); + + /* fidvid change will issue one LDTSTOP and the HT change will be effective too. */ + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + allow_all_aps_stop(bsp_apicid); + + /* It's the time to set ctrl in sysinfo now. */ + fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); + + enable_smbus(); + + memreset_setup(); + + /* Do we need apci timer, tsc...., only debug need it for better output */ + /* All AP stopped? */ + // init_timer(); /* Need to use TMICT to synconize FID/VID. */ + + sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); + + /* bsp switch stack to RAM and copy sysinfo RAM now. */ + post_cache_as_ram(); +} + +#endif
Added: trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/chip.h =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/chip.h (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/chip.h 2007-09-21 15:56:05 UTC (rev 2797) @@ -0,0 +1,24 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +extern struct chip_operations mainboard_msi_ms7260_ops; + +struct mainboard_msi_ms7260_config { +};
Added: trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/cmos.layout =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/cmos.layout (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/cmos.layout 2007-09-21 15:56:05 UTC (rev 2797) @@ -0,0 +1,119 @@ +## +## This file is part of the LinuxBIOS project. +## +## Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# TODO: Check and fix up the values as needed. + +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +399 1 e 2 dual_core +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +445 1 e 1 iommu +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 +
Added: trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/get_bus_conf.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/get_bus_conf.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/get_bus_conf.c 2007-09-21 15:56:05 UTC (rev 2797) @@ -0,0 +1,148 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <device/pci_ids.h> +#include <string.h> +#include <stdint.h> +#if CONFIG_LOGICAL_CPUS==1 +#include <cpu/amd/dualcore.h> +#endif +#include <cpu/amd/amdk8_sysconf.h> + +/* Global variables for MB layouts (shared by irqtable/mptable/acpi_table). */ +// busnum is default. +unsigned char bus_isa; +unsigned char bus_mcp55[8]; // 1 +unsigned apicid_mcp55; + +unsigned pci1234x[] = { + /* Here you only need to set value in pci1234 for HT-IO that could + * be installed or not. You may need to preset pci1234 for HTIO board, + * please refer to * src/northbridge/amd/amdk8/get_sblk_pci1234.c. + */ + 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0, +// 0x0000ff0 +}; + +unsigned hcdnx[] = { + /* HT Chain device num, actually it is unit id base of every ht + * device in chain, assume every chain only have 4 ht device at most. + */ + 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +// 0x20202020, +}; + +unsigned bus_type[256]; + +extern void get_sblk_pci1234(void); + +static unsigned get_bus_conf_done = 0; + +void get_bus_conf(void) +{ + unsigned int apicid_base, sbdn; + device_t dev; + int i, j; + + if (get_bus_conf_done == 1) + return; /* Do it only once. */ + + get_bus_conf_done = 1; + + sysconf.hc_possible_num = sizeof(pci1234x) / sizeof(pci1234x[0]); + for (i = 0; i < sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); /* First byte of first chain */ + sbdn = sysconf.sbdn; + + for (i = 0; i < 8; i++) + bus_mcp55[i] = 0; + + for (i = 0; i < 256; i++) + bus_type[i] = 0; + + bus_type[0] = 1; /* PCI */ + + bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; + + bus_type[bus_mcp55[0]] = 1; + + /* MCP55 */ + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); + if (dev) { + bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_mcp55[2]++; + for (j = bus_mcp55[1]; j < bus_mcp55[2]; j++) + bus_type[j] = 1; + } else { + printk_debug + ("ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x06); + + bus_mcp55[1] = 2; + bus_mcp55[2] = 3; + } + + for (i = 2; i < 8; i++) { + dev = dev_find_slot(bus_mcp55[0], + PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); + if (dev) { + bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + for (j = bus_mcp55[i]; j < bus_isa; j++) + bus_type[j] = 1; + } else { + printk_debug + ("ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_mcp55[0], sbdn + 0x0a + i - 2); + bus_isa = bus_mcp55[i - 1] + 1; + } + } + +/* I/O APICs: APIC ID Version State Address */ +#if CONFIG_LOGICAL_CPUS==1 + apicid_base = get_apicid_base(1); +#else + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; +#endif + apicid_mcp55 = apicid_base + 0; +}
Added: trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/irq_tables.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/irq_tables.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/irq_tables.c 2007-09-21 15:56:05 UTC (rev 2797) @@ -0,0 +1,110 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <arch/pirq_routing.h> +#include <cpu/amd/amdk8_sysconf.h> + +static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, + uint8_t devfn, uint8_t link0, uint16_t bitmap0, + uint8_t link1, uint16_t bitmap1, uint8_t link2, + uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, + uint8_t slot, uint8_t rfu) +{ + pirq_info->bus = bus; + pirq_info->devfn = devfn; + pirq_info->irq[0].link = link0; + pirq_info->irq[0].bitmap = bitmap0; + pirq_info->irq[1].link = link1; + pirq_info->irq[1].bitmap = bitmap1; + pirq_info->irq[2].link = link2; + pirq_info->irq[2].bitmap = bitmap2; + pirq_info->irq[3].link = link3; + pirq_info->irq[3].bitmap = bitmap3; + pirq_info->slot = slot; + pirq_info->rfu = rfu; +} + +extern unsigned char bus_isa; +extern unsigned char bus_mcp55[8]; // 1 + +unsigned long write_pirq_routing_table(unsigned long addr) +{ + struct irq_routing_table *pirq; + struct irq_info *pirq_info; + unsigned int slot_num, sbdn; + uint8_t *v; + uint8_t sum = 0; + int i; + + /* Will find out all bus num and apic that share with mptable.c + * and mptable.c and acpi_tables.c. + */ + get_bus_conf(); + sbdn = sysconf.sbdn; + + /* Align the table to be 16 byte aligned. */ + addr += 15; + addr &= ~15; + + /* This table must be betweeen 0xf0000 and 0x100000. */ + printk_info("Writing IRQ routing tables to 0x%x...", addr); + + pirq = (void *)(addr); + v = (uint8_t *)(addr); + + pirq->signature = PIRQ_SIGNATURE; + pirq->version = PIRQ_VERSION; + pirq->rtr_bus = bus_mcp55[0]; + pirq->rtr_devfn = ((sbdn + 6) << 3) | 0; + pirq->exclusive_irqs = 0; + pirq->rtr_vendor = 0x10de; + pirq->rtr_device = 0x0370; /* TODO: Hm, getpir suggests 0x0364 !? */ + pirq->miniport_data = 0; + + memset(pirq->rfu, 0, sizeof(pirq->rfu)); + + pirq_info = (void *)(&pirq->checksum + 1); + slot_num = 0; + + /* PCI bridge (00:06.0) */ + write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn + 6) << 3) | 0, 0x1, + 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; + slot_num++; + + pirq->size = 32 + 16 * slot_num; + + for (i = 0; i < pirq->size; i++) + sum += v[i]; + + sum = pirq->checksum - sum; + + if (sum != pirq->checksum) + pirq->checksum = sum; + + printk_info("done.\n"); + + return (unsigned long)pirq_info; +}
Added: trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/mainboard.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/mainboard.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/mainboard.c 2007-09-21 15:56:05 UTC (rev 2797) @@ -0,0 +1,28 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <device/device.h> +#include "chip.h" + +#if CONFIG_CHIP_NAME == 1 +struct chip_operations mainboard_msi_ms7260_ops = { + CHIP_NAME("MSI K9N Neo (MS-7260) Mainboard") +}; +#endif
Added: trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/mptable.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/mptable.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/mptable.c 2007-09-21 15:56:05 UTC (rev 2797) @@ -0,0 +1,150 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <console/console.h> +#include <arch/smp/mpspec.h> +#include <device/pci.h> +#include <string.h> +#include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + +extern unsigned char bus_isa; +extern unsigned char bus_mcp55[8]; // 1 +extern unsigned apicid_mcp55; +extern unsigned bus_type[256]; + +void *smp_write_config_table(void *v) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "MSI "; + static const char productid[12] = "MS-7260 "; + struct mp_config_table *mc; + unsigned int sbdn; + int i, j; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* Initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* Not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); + + get_bus_conf(); + sbdn = sysconf.sbdn; + + /* Bus: Bus ID Type */ + /* Define bus and ISA numbers. */ + for (j = 0; j < 256; j++) { + if (bus_type[j]) + smp_write_bus(mc, j, "PCI "); + } + smp_write_bus(mc, bus_isa, "ISA "); + + /* I/O APICs: APIC ID Version State Address */ + { + device_t dev; + struct resource *res; + uint32_t dword; + + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x1, 0)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_1); + if (res) + smp_write_ioapic(mc, apicid_mcp55, 0x11, res->base); + + dword = 0x43c6c643; + pci_write_config32(dev, 0x7c, dword); + + dword = 0x81001a00; + pci_write_config32(dev, 0x80, dword); + + dword = 0xd0001202; + pci_write_config32(dev, 0x84, dword); + } + } + + /* I/O Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_mcp55, 0x0); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_mcp55, 0x1); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_mcp55, 0x2); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, apicid_mcp55, 0x3); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, apicid_mcp55, 0x4); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, apicid_mcp55, 0x6); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, apicid_mcp55, 0x7); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, apicid_mcp55, 0x8); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, apicid_mcp55, 0xc); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_mcp55, 0xd); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_mcp55, 0xe); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_mcp55, 0xf); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 1) << 2) | 1, apicid_mcp55, 0xa); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 2) << 2) | 0, apicid_mcp55, 0x16); // 22 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 2) << 2) | 1, apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 6) << 2) | 1, apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 0, apicid_mcp55, 0x14); // 20 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 1, apicid_mcp55, 0x17); // 23 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 2, apicid_mcp55, 0x15); // 21 + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 8) << 2) | 0, apicid_mcp55, 0x16); // 22 + + for (j = 7; j >= 2; j--) { + if (!bus_mcp55[j]) + continue; + for (i = 0; i < 4; i++) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[j], (0x00 << 2) | i, apicid_mcp55, 0x10 + (2 + j + i + 4 - sbdn % 4) % 4); + } + + for (j = 0; j < 2; j++) { + for (i = 0; i < 4; i++) + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[1], ((0x06 + j) << 2) | i, apicid_mcp55, 0x10 + (2 + i + j) % 4); + } + + /* Local Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0); + smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1); + + /* There is no extension information... */ + + /* Compute the checksums. */ + mc->mpe_checksum = + smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v); +}
Added: trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/resourcemap.c =================================================================== --- trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/resourcemap.c (rev 0) +++ trunk/LinuxBIOSv2/src/mainboard/msi/ms7260/resourcemap.c 2007-09-21 15:56:05 UTC (rev 2797) @@ -0,0 +1,283 @@ +/* + * This file is part of the LinuxBIOS project. + * + * Copyright (C) 2007 AMD + * Written by Yinghai Lu yinghailu@amd.com for AMD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +/* TODO: This is copied from the GIGABYTE GA-M57SLI-S4 target. */ + +static void setup_mb_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, + + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, +// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, + + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, + + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ +// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, + PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, + + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration region i + */ +// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of cpu 0 --> Nvidia MCP55 */ + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + + }; + + int max = sizeof(register_values) / sizeof(register_values[0]); + setup_resource_map(register_values, max); +}
Added: trunk/LinuxBIOSv2/targets/msi/ms7260/Config.lb =================================================================== --- trunk/LinuxBIOSv2/targets/msi/ms7260/Config.lb (rev 0) +++ trunk/LinuxBIOSv2/targets/msi/ms7260/Config.lb 2007-09-21 15:56:05 UTC (rev 2797) @@ -0,0 +1,53 @@ +## +## This file is part of the LinuxBIOS project. +## +## Copyright (C) 2007 Uwe Hermann uwe@hermann-uwe.de +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +target ms7260 +mainboard msi/ms7260 + +option ROM_SIZE = 512 * 1024 + +romimage "normal" + option USE_FAILOVER_IMAGE = 0 + option USE_FALLBACK_IMAGE = 0 + option ROM_IMAGE_SIZE = 128 * 1024 + option XIP_ROM_SIZE = 256 * 1024 + option LINUXBIOS_EXTRA_VERSION = ".0Normal" + payload /tmp/filo.elf +end + +romimage "fallback" + option USE_FAILOVER_IMAGE = 0 + option USE_FALLBACK_IMAGE = 1 + option ROM_IMAGE_SIZE = 128 * 1024 + option XIP_ROM_SIZE = 256 * 1024 + option LINUXBIOS_EXTRA_VERSION = ".0Fallback" + payload /tmp/filo.elf +end + +romimage "failover" + option USE_FAILOVER_IMAGE = 1 + option USE_FALLBACK_IMAGE = 0 + option ROM_IMAGE_SIZE = FAILOVER_SIZE + option XIP_ROM_SIZE = FAILOVER_SIZE + option LINUXBIOS_EXTRA_VERSION = ".0Failover" +end + +# buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" +buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" "failover"