Kevin,
On Sat, Jul 19, 2008 at 9:51 AM, Kevin O'Connor kevin@koconnor.net wrote:
Hi Myles,
On Thu, Jul 17, 2008 at 10:40:48AM -0600, Myles Watson wrote:
I used to be able to make it through the install process with ADLO (just rombios.c, not rombios32.c), so maybe something in the PCI code is messing me up.
Okay - that's unexpected. You seem to be having ps2 port issues - and as far as I know that code is the same between seabios and bochs bios.
I just tried your latest code, and I'm attaching the logs with and without PS2 support. I get an identical blue screen with both of them. There must be something else that's stopping the boot.
Can you list the exact versions you're working with:
- seabios version
latest from your git repository
- coreboot version
latest with patches to make it find my coprocessor
* adlo/bochs bios version / source repo
1.186 bochs bios and adlo with patches that I posted to the list.
http://www.mail-archive.com/linuxbios@linuxbios.org/msg12748.html http://www.mail-archive.com/linuxbios@linuxbios.org/msg12724.html
I'd like to try and compare the ps2 port code between what works for you and what doesn't work for you to try and spot any differences.
Note that when CONFIG_COREBOOT is on, the PCI code really isn't compiled in to seabios.
I don't know what else to try. Hopefully you can spot something in the
logs.
I don't see anything obvious. Are you truncating the logs, or do you have disabled the coreboot serial logging?
I was truncating the logs because I have a very verbose boot and it didn't look relevant.
I saw your post about F7, and since it is silent I couldn't tell if it worked. I still saw ACPI-related drivers being loaded.
Have you tried this on Bochs? When I was doing this before, Bochs failed in a similar way to the hardware.
Thanks, Myles