Thomas,
On Sat, 2004-08-07 at 16:57, Stefan Reinauer wrote:
my graphics-controller is integrated in the Cx5530A-chipset. I think it should be supported, or am I wrong?
Someone here on the list got it working, but generally speaking, it does not work out of the box. Cx5530 has a pretty broken design..
I did a quick and dirty port of LinuxBios V1 to an SBC with a GX1 CPU and a CS5530 using the cocom/voyager2 directory as a base and managed to get it up and running fairly quickly with console output on the serial port.
Basic console graphics took a little longer (but not much) but unfortunately I then ran out of time before I got graphics working fully.
If you want I can dig out the diffs and my config file and mail them to you but I should warn you it was a bit rough and ready so they would definitely need more work (and I don't really have time to pursue it myself right now).
However a quick look at your config compared to mine shows a few lines which I have in mine which may be significant (or not):
option ZKERNEL_START=0xfffc0000 option ZKERNEL_MASK=0xffff
option PAYLOAD_SIZE=196608
Of course if you're using LinuxBios V2 then this won't be much use to you I'm afraid.
Stefan
Cheers
Ian
Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios