[LinuxBIOS] r2595 - trunk/LinuxBIOSv2/src/northbridge/amd/amdk8

Author: stepan
Date: 2007-04-06 22:59:54 +0200 (Fri, 06 Apr 2007)
New Revision: 2595

Modified:
   trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/northbridge.c
Log:
This commit is part of YhLu's patch from January 18th.

Drop a lot of debugging code from northbridge.c

Signed-off-by: Yinghai Lu 
Signed-off-by: Ed Swierk 
Signed-off-by: Stefan Reinauer 
Acked-by: Ward Vandewege 
Acked-by: Stefan Reinauer

Modified: trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/northbridge.c
===================================================================
--- trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/northbridge.c	2007-04-06 20:58:37 UTC (rev 2594)
+++ trunk/LinuxBIOSv2/src/northbridge/amd/amdk8/northbridge.c	2007-04-06 20:59:54 UTC (rev 2595)
@@ -103,12 +103,6 @@

static unsigned int amdk8_scan_chain(device_t dev, unsigned nodeid, unsigned link, unsigned sblink, unsigned int max, unsigned offset_unitid)
 {
-#if 0
-	printk_debug("%s amdk8_scan_chains max: %d starting...\n", 
-		dev_path(dev), max);
-#endif
-//	I want to put sb chain in bus 0 can I?
-
     
    	uint32_t link_type;
    	int i;
@@ -212,10 +206,6 @@
    		((dev->link[link].subordinate) << 24);
    	f1_write_config32(config_reg, config_busses);

-#if 0
-		printk_debug("%s Hyper transport scan link: %d max: %d\n", 
-			dev_path(dev), link, max);
-#endif
    	/* Now we can scan all of the subordinate busses i.e. the
    	 * chain on the hypertranport link 
    	 */
@@ -224,11 +214,6 @@
    	}
    	max = hypertransport_scan_chain(&dev->link[link], 0, 0xbf, max, ht_unitid_base, offset_unitid);

-#if 0
-		printk_debug("%s Hyper transport scan link: %d new max: %d\n",
-			dev_path(dev), link, max);
-#endif		
-
    	/* We know the number of busses behind this bridge.  Set the
    	 * subordinate bus number to it's real value
    	 */
@@ -254,11 +239,6 @@

}

-#if 0
-		printk_debug("%s Hypertransport scan link: %d done\n",
-			dev_path(dev), link);
-#endif
-
    return max;
 }

@@ -271,11 +251,6 @@
         nodeid = amdk8_nodeid(dev);

-#if 0
-        printk_debug("%s amdk8_scan_chains max: %d starting...\n",
-                dev_path(dev), max);
-#endif
-//      I want to put sb chain in bus 0

if(nodeid==0) {
                 sblink = (pci_read_config32(dev, 0x64)>>8) & 3;
@@ -301,10 +276,6 @@

max = amdk8_scan_chain(dev, nodeid, link, sblink, max, offset_unitid);
         }
-#if 0
-        printk_debug("%s amdk8_scan_chains max: %d done\n",
-                dev_path(dev), max);
-#endif
         return max;
 }

@@ -332,12 +303,7 @@
    		result = 1;
    	}
    }
-#if 0
-	printk_debug("reg: %02x result: %d gnodeid: %u glink: %u nodeid: %u link: %u\n",
-		reg, result, 
-		goal_nodeid, goal_link, 
-		nodeid, link);
-#endif
+
    return result;
 }

@@ -1258,7 +1224,7 @@
    	if (dev && dev->enabled) {
    		j = pci_read_config32(dev, 0xe8);
    		j = (j >> 12) & 3; // dev is func 3
-			printk_debug("  %s siblings=%d\r\n", dev_path(dev), j);
+			printk_debug("  %s siblings=%d\n", dev_path(dev), j);

if(nb_cfg_54) {
    			// For e0 single core if nb_cfg_54 is set, apicid will be 0, 2, 4....