Author: ruik Date: Sun Nov 7 20:17:18 2010 New Revision: 6043 URL: https://tracker.coreboot.org/trac/coreboot/changeset/6043
Log: Depends on the "Introduce get_vt8237_lpc() function" and "Use get_vt8237_lpc() in vt8237_sb_enable_fid_vid()" patches.
This adds VT8237A specific VLINK/LPC init in vt8237r_early_smbus.c I ran some tests and apparently both the
| /* So the chip knows we are on AMD. */ | pci_write_config8(devctl, 0x7c, 0x7f);
and
| /* | * Allow SLP# signal to assert LDTSTOP_L. | * Will work for C3 and for FID/VID change. | */ | outb(0x1, VT8237R_ACPI_IO_BASE + 0x11);
in vt8237r_early_smbus.c are needed on VT8237A, otherwise I get a (non-fatal) fid/vid change error on boot.
While vt8237a_vlink_init() in vt8237_ctrl.c is a modified vt8237r_vlink_init(), vt8237a_init() in vt8237r_lpc.c is a modified vt8237s_init().
Signed-off-by: Tobias Diedrich ranma+coreboot@tdiedrich.de Acked-by: Rudolf Marek r.marek@assembler.cz
Modified: trunk/src/southbridge/via/vt8237r/vt8237r_early_smbus.c
Modified: trunk/src/southbridge/via/vt8237r/vt8237r_early_smbus.c ============================================================================== --- trunk/src/southbridge/via/vt8237r/vt8237r_early_smbus.c Sun Nov 7 19:57:10 2010 (r6042) +++ trunk/src/southbridge/via/vt8237r/vt8237r_early_smbus.c Sun Nov 7 20:17:18 2010 (r6043) @@ -257,19 +257,30 @@ return;
devid = pci_read_config16(dev, PCI_DEVICE_ID); - if (devid == PCI_DEVICE_ID_VIA_VT8237S_LPC) { - devctl = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237_VLINK), 0);
- if (devctl == PCI_DEV_INVALID) - return; + /* generic setup */ + + /* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */ + pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1); + + /* Enable ACPI accessm RTC signal gated with PSON. */ + pci_write_config8(dev, 0x81, 0x84); + + /* chipset-specific parts */
- /* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */ - pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1); + /* VLINK: FIXME: can we drop the devid check and just look for the VLINK device? */ + if (devid == PCI_DEVICE_ID_VIA_VT8237S_LPC || + devid == PCI_DEVICE_ID_VIA_VT8237A_LPC) { + devctl = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_VT8237_VLINK), 0);
- /* Enable ACPI accessm RTC signal gated with PSON. */ - pci_write_config8(dev, 0x81, 0x84); + if (devctl != PCI_DEV_INVALID) { + /* So the chip knows we are on AMD. */ + pci_write_config8(devctl, 0x7c, 0x7f); + } + }
+ if (devid == PCI_DEVICE_ID_VIA_VT8237S_LPC) { /* * Allow SLP# signal to assert LDTSTOP_L. * Will work for C3 and for FID/VID change. @@ -280,17 +291,10 @@ /* Reduce further the STPCLK/LDTSTP signal to 5us. */ pci_write_config8(dev, 0xec, 0x4);
- /* So the chip knows we are on AMD. */ - pci_write_config8(devctl, 0x7c, 0x7f); - return; }
- /* Set ACPI base address to I/O VT8237R_ACPI_IO_BASE. */ - pci_write_config16(dev, 0x88, VT8237R_ACPI_IO_BASE | 0x1); - - /* Enable ACPI accessm RTC signal gated with PSON. */ - pci_write_config8(dev, 0x81, 0x84); + /* VT8237R and VT8237A */
/* * Allow SLP# signal to assert LDTSTOP_L.