Re: [LinuxBIOS] Firmware hub parts

[Bari Ari]

The 5535 has pin straps that Advantech would have to use.

What model number is your SOM? PCM-58xx seems to be the range of model 
numbers for their AMD Geode boards.

Does your board have an IDE interface?

If so, you should be able to have it boot from flash/ide by swapping a 
couple resistors on the board.

-Bari

Richard Smith wrote:
> On 3/20/06, Bari Ari  wrote:
> > If you are using the 5535 thin client reference design then you can make
> > a couple of pin strap changes and have the board boot from the ide/flash
> > interface vs the FWH.
>
> No. Its the SOM made by Advantech.  I'll have to look at the
> schematics to see if it has anything like that.  Looking at the board
> I doubt it.