Ron,
I have tried the romimage in AMD solo 7 MB, and the LinuxBIOS can boot until Etherboot. So the ROM image I built should be OK.
The Tyan s2880 has two CPUs and supported dual channel DDR. The Opteron CPU is for Server/workstation and The cpu for AMD solo is for desktop (Crawhammer).
Any advise.
Regards
Yinghai Lu
-----邮件原件----- 发件人: ron minnich [mailto:rminnich@lanl.gov] 发送时间: 2003年6月9日 22:17 收件人: YhLu 抄送: linuxbios@clustermatic.org 主题: Re: 答复: 答复: new config language.
On Mon, 9 Jun 2003, YhLu wrote:
Is there any MB can boot to execute into LinuxBIOS after copying it to RAM?
yes, many.
The _RAMBASE WE use for E7501 is 0x8000, and the FreeBIOS2 default for K8
is
0x4000. How should I set the value to make the LinuxBIOS can boot into hardwaremain.c. It seems MB only execute the auto.c and crt0.base and can not jump to the right address.
I'm not sure what's wrong here. You may have to start checking the object code to see if it is correct.
For what it is worth the new config tool is almost working ... just trying to get the sizing of the romimage correct.
Hopefully I can start paying attention to linuxbios itself soon, now that I can bulid it.
ron
_______________________________________________ Linuxbios mailing list Linuxbios@clustermatic.org http://www.clustermatic.org/mailman/listinfo/linuxbios